DOWNLOAD Sharp LC-60LE855K (serv.man4) Service Manual ↓ Size: 8.03 MB | Pages: 94 in PDF or view online for FREE

The illustrations on this page are explained using three digit services.

Press EPG.

•  You can also display the EPG screen from “TV Menu” > “EPG” > “EPG”.

1 Select the time span

Press 

c/d to select the time span 

you want to search.

•  Continue to press 

d to display 

programmes in the next time span.

2 Select the desired 

Press 

a/b to select the desired 

programme.

• If 

a or b are displayed on the left of 

the services, continue to press 

a/b 

to display next or previous screen.

3 Check programme 

 

Press 

a/b/c/d to select the 

programme you want to check.

 

Press R, and then press 

; to tune 

to the selected programme.

4 Search a programme in a 

 

Press G.

 

Press 

a/b to select the desired 

genre, and then press 

;.

 

Press 

a/b to select a programme 

you want to watch, and then press 

;.

•  Refer to page 22 for the genre setting.

News/Current affairs

Movie/Drama

Show/Game show

Sports
Children’s/Youth programmes
Music/Ballet/Dance

•  You can also display this setting screen 

from “TV Menu” > “EPG” > “Search by 
genre”.

5 Search for a programme by 

 

Press Y.

 

Press 

c/d to select the desired 

time span, and then press 

;.

 

Press 

a/b to select the desired 

programme, and then press 

;.

•  You can also display this setting screen 

from “TV Menu” > “EPG” > “Search by 
date”.

6  Display the timer list for TV 

Press B.

•  Refer to page 24 for the timer setup.

The TV can be switched to a programme or start 
recording for USB-recording at the set time.

 

Press EPG.

 

Press 

a/b/c/d to select the programme you 

want to set, and then press 

;.

 

Press 

c/d to select “Watch” or “Record”, and 

then press 

;.

•  If you select “No”, the TV returns to the EPG screen.

 

Press 

c/d to select “Yes”, and then press ;.

•  The selected TV programme is marked with an icon.

 

Press 

; to select “Back”.

•  You cannot select “Record” when the registered USB 

HDD is not connected to the USB port.

•  A combined total of 16 timer settings (“Watch” and 

“Record”) can be set.

A CAM (CI Plus v1.3) PIN code may be necessary to 
record broadcasts scrambled due to parental rate 
settings.
When a CAM PIN code is required for recording a 
programme, it is necessary to enter the CAM PIN code 
in advance (Page 12).
If a CAM PIN code is not entered or is entered 
incorrectly, the programme may not be able to be 
recorded/played back.

 

Press EPG.

 

Press 

a/b/c/d to select the programme with 

timer setup, and then press 

;.

 

Press 

c/d to select “Cancel”, and then press ;.

 

Press 

c/d to select “Yes”, and then press ;.

E

 

Press EPG.

 

Press B to display the timer setup list.

 

Press 

a/b to select the programme you want 

to cancel timer setup, and then press 

;.

 

Press 

c/d to select “Cancel”, and then press ;.

 

Press 

c/d to select “Yes”, and then press ;.

Teletext broadcasts pages of information and 
entertainment to specially equipped TV. Your 
TV receives teletext signals broadcast by a TV 
network, and decodes them into graphical format 
for viewing. News, weather and sports information, 
stock exchange prices and programme previews are 
among the many services available.

 

Select a TV channel or external source providing 
a teletext programme.

 

Press m to display the teletext.

•  Many stations use the TOP operating system, while 

some use FLOF (e.g., CNN). Your TV supports both 
these systems. The pages are divided into topic 
groups and topics. After switching on the teletext, 
up to 2,000 pages are stored for fast access.

•  If you select a programme with no teletext signal, 

“No Teletext available” displays.

•  The same message displays during other modes if 

no teletext signal is available.

•  Each time you press m, the screen switches as 

shown above.

• Press m again to display the teletext on the right 

screen and the normal image on the left screen.

•  Teletext will not work if the selected signal type is RGB 

(Page 47).

•  Teletext will not work in 3D mode.

:r/s

Increase or decrease the page number.

Numeric 
buttons 0_9

Directly select any page from 100 to 
899 by using the 0_9 numeric buttons.

Select a group or block of pages 
displayed in the coloured brackets at 
the bottom of the screen by pressing 
the corresponding colour (R/G/Y/B) on 
the remote control unit.

k (Reveal 
hidden 
teletext)

Reveal or hide hidden information such 
as an answer to a quiz.

3 (Freeze/
Hold)

Stop updating teletext pages 
automatically or release the hold mode.

[ (Subtitle 
for teletext)

Display the subtitle or exit the subtitle 
screen.
•  Subtitles will not be displayed when 

the service does not contain subtitle 
information.

1 (Subpage)

Reveal or hide subpages.
•  Move to the previous subpage (R).
•  Move to the following subpage (G).
•  These two buttons are shown on the 

screen by the symbols “

e” and “f”.

;

Display the top menu.
•  The top menu will not be displayed 

when the service does not support 
top menus.

Some services bring you programmes with the 
MHEG application encoded, letting you experience 
DTV interactively. When provided, the MHEG-5 
application will start when you press m.

•  MHEG may not be displayed properly in 3D mode.
•  You can view some MHEG-5 content even if you do not 

perform “Network setup”. Furthermore, “Network setup” 
allows you to view additional content such as interactive 
content from “HOME” > “Network setup”.

•  You cannot view MHEG-5 content when MHEG-5 

content is not broadcast even if you perform the 
appropriate “Network setup”. Carefully check the 
broadcast programme.

If the TV is installed for Italy, MHP (Multimedia Home 
Platform) is active. If the channel you are currently 
watching provides MHP service, you can enjoy a 
variety of MHP services.

•  MHP may not be displayed properly in 3D mode.
•  You can view some MHP content even if you do not 

perform “Network setup”. Furthermore, “Network setup” 
allows you to view additional content such as interactive 
content from “HOME” > “Network setup”.

If the channel you are currently watching provides 
HbbTV service, you can enjoy a variety of services.

•  This application is not available when “UK” or “Italy” is 

selected for the country setting.

•  HbbTV may not be displayed properly in 3D mode.
•  You need to perform “Network setup” to enjoy HbbTV 

application. Please navigate “HOME” > “Network 
setup”.

Set the MHP/Hbb service starting settings (“Auto”, 
“Manual”, “Off”).

Go to “TV Menu” > “Setup” > “View setting” > 
“Data service setting”.

• If “Data service setting” is set to “Auto”, the TV will load 

the MHP/Hbb pages automatically.

•  To avoid automatic loading, you can set to “Manual” or 

“Off”.

•  Subtitles for teletext may not display when MHP/Hbb 

service is started. In such cases, set to “Off”.

•  “Manual” can be set only for Italy.

If the channel you are currently watching provides 
data service, you can enjoy MHP/Hbb content.

E

Press R to display the data service screen.

•  After changing the channel, please wait momentarily 

until “HbbTV” icon is displayed on the screen (HbbTV).

E

 

1

Press APP to display the MHP application 
list.

 

2

Press 

a/b/c/d to select a desired service, 

and then press 

;.

 

3

Press R to display the data service screen.

 

Press 

a/b/c/d to select a desired option, 

and then press 

;. The selected service will be 

started.

•  Operations vary depending on the MHP/Hbb 

application.

•  If a certain function appears on the screen, you can use 

the offered function by pressing the colour buttons.

•  Text can be inputted using the numbers and letters 

printed on the numeric buttons on the remote control 
unit.

 

If you press END, data service will close.