DOWNLOAD Sharp LC-60LE855K (serv.man4) Service Manual ↓ Size: 8.03 MB | Pages: 94 in PDF or view online for FREE

The TV is equipped with the terminals as shown 
below. Find the cable corresponding the TV’s 
terminal and connect the device.

E

•  Be sure to turn off the TV and any devices before 

making any connections.

•  Firmly connect a cable to a terminal or terminals.
•  Carefully read the operation manual of each external 

device for possible connection types. This also helps 
you get the best possible audiovisual quality to 
maximise the potential of the TV and the connected 
device.

 

w PC

Æ Page 59

 

w USB HDD

Æ Page 51

 

w USB memory

Æ Page 55

 

w Internet

Æ Pages 64 and 65

Audio device

(Page 30)

Video recording device 

(Pages 29–30)

Game console or 

camcorder (Page 30)

HDMI-certified cable

HDMI-certified cable

DVI/HDMI cable

ø 3.5 mm stereo minijack cable

AV cable

Audio cable

Optical audio cable

SCART cable

Component cable

Audio cable

HDMI device

(Page 28)

or

 

E

DVD player/recorder

 

E

Blu-ray player/recorder

 

E

Game console

The HDMI connections permit digital video and audio transmission via a 
connection cable from a player/recorder. The digital picture and sound data are 
transmitted without data compression and therefore lose none of their quality. 
Analogue/digital conversion is no longer necessary in the connected devices, 
which also would result in quality losses.

n

o

p

 

n

ø 3.5 mm stereo minijack cable (commercially available)

 

o

DVI/HDMI cable (commercially available)

 

p

HDMI-certified cable (commercially available)

Using a DVI/HDMI cable, the digital video signals of a DVD can also be played 
via the compatible HDMI connection. The sound must be fed in additionally.

•  When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in 

clearly.

•  Both HDMI and DVI use the same HDCP copy protection method.

E

You must set the audio signal input source depending on the type of HDMI 
cable connected (refer to page 47 for details).

 

Press b to select “HDMI 2” from the “INPUT” menu, and then press 

;.

 

Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio 
select” > select “HDMI”.

 

Press b to select “HDMI 2” from the “INPUT” menu, and then press 

;.

 

Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio 
select” > select “HDMI + Analogue”.

•  If a connected HDMI device is AQUOS LINK compatible, you can take advantage 

of versatile functions (Pages 31_34).

•  Video noise may occur depending on the type of HDMI cable used. Make sure to use a 

certified HDMI cable.

•  When playing the HDMI image, the best possible format for the picture will be detected 

and set automatically.

•  An ARC (Audio Return Channel) compatible audio receiver must be connected to the 

HDMI 1 terminal with an ARC-compatible cable.

•  All HDMI terminals support 3D image signals.

576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 61 for PC signal compatibility.

Linear PCM, sampling rate 32/44.1/48kHz.
Dolby Digital, DTS

Y

P

B

(

C

B)

P

R

(

C

R)

 

E

VCR

 

E

DVD player/recorder

n

 

n

SCART cable (commercially available)

•  Regarding the external output:

 

− You can record programmes viewed on the TV with an external recording device 

by connecting the external output of the TV with an SCART cable (commercially 
available).

 

− If you change TV channels during recording from the external devices or turn off the 

power on the TV, the recorded content may change or be interrupted.

 

− The external output may not be performed depending on the status of use.

 

E

VCR

 

E

DVD player/recorder

You will enjoy accurate colour reproduction and high quality images through the 
EXT 3 terminal when connecting a DVD player/recorder or other device.

n

o

 

n

Component cable (commercially available)

 

o

Audio cable (commercially available)

 

E

VCR

 

E

DVD player/recorder

 

E

Game console

 

E

Camcorder

You can use the EXT 2 terminal when connecting to a game console, camcorder, 
a DVD player/recorder or other device.

n

 

n

AV cable (commercially available)

Connect an amplifier with external speakers as shown below.

E

n

o

 

n

Stereo conversion cable (for analogue audio) (commercially available)

 

o

Optical audio cable (for digital audio) (commercially available)

*  This terminal is also used for headphones. Reduce the volume before using 

headphones. Overwhelming sound may damage your hearing.

•  If the image is not in sync with the audio, check the settings of the connected surround 

system.

E

Digital audio output setting
After connecting an amplifier with digital audio input and external speakers 
as shown, you should set an audio output format compatible with the 
programme you are watching or the device connected.

Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital 
audio output” > select “PCM” or “Bitstream”.

•  When set to “Bitstream”, Dolby Digital is output when the Dolby Digital or Dolby 

Digital Plus audio formats are received or DTS is output when DTS audio formats 
are received. When set to “PCM”, PCM is output no matter what audio formats are 
received.

•  When set to “Bitstream”, HE-AAC audio formats can be output as Dolby Digital.
•  When set to “Bitstream”, Dolby Digital Plus can be output as Dolby Digital.