DOWNLOAD Sharp LC-60LE855K (serv.man4) Service Manual ↓ Size: 8.03 MB | Pages: 94 in PDF or view online for FREE

When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings 
one after another.

 

E

Is the antenna cable connected?

 

E

Is the AC cord plugged in?

 

E

Is the MAIN POWER switch turned on (;)?

Satellite services are only available for the 857 model 
series.

 

Press a on the TV.

•  The initial auto installation wizard appears.

 

Setting the OSD language.

Press 

a/b/c/d to select the desired language, and 

then press 

;.

 

Selecting the location of the TV.

HOME

STORE

Press 

c/d to select where you will use this TV, and 

then press 

;.

•  The confirmation screen pops up only when 

selecting “STORE”. Press 

c/d to select “Yes” or 

“No”.

• HOME: “STANDARD” will be the default value for 

the “AV mode” setting.

• STORE: “DYNAMIC (Fixed)” will be the default 

value for the “AV mode” setting. If the “AV mode” 
is changed, the TV will automatically switch back 
to “DYNAMIC (Fixed)” when there is no operation 
using the TV or remote control unit for 30 minutes.

•  STORE: A demonstration image will be displayed 

after initial auto installation is completed. If you 
have chosen “STORE” by mistake, go to “TV 
Menu” > “Setup” > “View setting” > “Reset” > 
select “HOME” again.

 

Setting the country.

Press 

a/b/c/d to select your country or area, and 

then press 

;.

•  This setting screen only appears during the initial 

auto installation.

•  Some functions may not display or be selectable 

depending on the country setting or cable provider 
selection.

 

Setting the PIN.

 

1

Press 

c/d to select “Yes”, and then press 

;.

• When “No” is selected, the PIN code setting is 

skipped.

 

2

Enter a four-digit number as a PIN using the 
0–9 buttons.

 

3

Enter the same four-digit number as in step 

2 to confirm.

 

4

Press 

;.

• When “France” or “Italy” is selected in the country 

setting, the PIN code setting cannot be skipped.

•  “0000” cannot be set as the PIN code.
•  When the PIN code setting is skipped, the default PIN 

code (“1234”) will automatically be set.

•  To change the PIN setting, refer to Individual setting — 

PIN (Page 44). To reset the PIN setting (PIN input will no 
longer be needed), refer to Reset the PIN (Page 79).

 

Starting channel search.

Digital search

Analogue search

Satellite search

Press 

a/b to select “Digital search”, “Analogue 

search” or “Satellite search”, and then press 

;.

•  (857 series only) After performing “Digital search” 

or “Analogue search”, the screen switches to the 
“Satellite search” setting. You should then execute 
“Yes” if you want to search for satellite channels.

•  To watch both digital broadcasts and analogue 

broadcasts, you should perform “Digital search” or 
“Analogue search” from “Auto installation” under 
the “Setup” menu (Page 41).

•  When you select “Satellite search”, only satellite 

broadcasts will be searched.

•  If you want to search for more broadcasts, execute 

“Additional search” from the “Programme setup” 
menu (Pages 41_43).

•  If you turn off the power on the TV while performing a 

channel search, the initial auto installation wizard will 
not appear. The auto installation function allows you 
to execute the installation again from “TV Menu” > 
“Setup” > “View setting” (Page 41).

•  The initial auto installation wizard will abort if you leave 

the TV unattended for 30 minutes before searching for 
channels.

• When “Italy” or “France” is selected in the country 

setting, the default age restriction value is set to 18.

Press 

c/d to select “Terrestrial” or “Cable”, 

and then press 

;.

Terrestrial

Cable

E

The TV searches for, sorts and stores all the 
receivable TV stations according to their settings 
and the connected antenna.

•  To abort the initial auto installation in progress, 

press 6.

•  A region or service selection screen may display 

depending on the country settings or cable providers 
selections. Follow the screen prompts to make the 
selections.

After searching for terrestrial channels, the screen 
switches to the “Satellite search” setting (Page 17).

E

To change each item to the appropriate settings:

 

Press 

a/b to select 

the menu, and then 
press 

;.

 

 Press 

a/b/c/d or 

0_9 to select or input 
the appropriate item/
value, and then press 

;.

Scrambled stations

[Yes]

Search method

[Channel]

Start frequency

Network ID

[None]

Symbol rate 1

Symbol rate 2

QAM modulation 1

QAM modulation 2

Reset

Search start

 

Press 

a/b to select “Search start”, and then 

press 

;.

 

Press 

c/d to select “Yes” to start searching 

cable broadcasts, and then press 

;.

 

The TV searches for, sorts and stores all the 
receivable TV stations according to their settings 
and the connected antenna.

•  To abort the initial auto installation in progress, 

press 6.

After searching for cable channels, the screen 
switches to the “Satellite search” setting (Page 17).

Specifies if you 
need to add pay-
TV services.

Yes, No

Specifies how 
you search for 
channels.*

2

Channel, 
Frequency, Quick

From 47.0_858.0 
MHz

Specifies the 
network.*

3

 

None, 0_65535

Input the value 
received for 
CATV.*

4

1000_9000

16, 32, 64, 128, 
256

None, 16, 32, 64, 
128, 256

 

I

Set up “Symbol rate 2” if the cable provider uses 
several symbol rates.

 

J

Details about the “Search method” items are as 
follows:
_Channel: Extracts all information from a channel 
(quick, but needs corresponding TV stations).
_Frequency: Checks every frequency in range (slow).
_Quick: All services are searched by one frequency. 
This menu works only when your cable provider 
provides the frequency and the network ID (e.g., 
Homing channel). When “Quick” is selected, 
“Scrambled stations” is automatically set to “Yes”, and 
“None” for the “Network ID” menu cannot be selected.

 

K

Set this to register only the specified network ID 
without registering any special services.

 

L

The symbol rates are specified by the cable provider.

The TV searches for, sorts and stores all the 
receivable TV stations according to their settings 
and the connected antenna.

•  To abort the initial auto installation in progress, 

press 6.

After searching for analogue channels, the screen 
switches to the “Satellite search” setting (Page 17).

Press 

a/b to select “Satellite search”, and then 

press 

;.

Digital search

Analogue search

Satellite search

•  The antenna connection setting screen is displayed.

Single satellite

2 satellites on toneburst switchbox

Max. 4 satellites on DiSEqC multiswitch

Communal satellite system

•  You can select the antenna connection method from the 

four types. Consult your dealers before using a method 
other than “Single satellite”.

E

 

Press 

a/b to select “Single satellite”, and then 

press 

;.

 

Press 

a/b/c/d to select your favorite 

satellite, and then press 

;.

Euro Bird 1

Atlantic Bird 1

•  Follow the instructions on the screen for “2 satellites 

on toneburst switchbox”, “Max. 4 satellites on DiSEqC 
multiswitch” and “Communal satellite system” settings.

•  To set multiple satellite channels, go to “Max. 4 satellites 

on DiSEqC multiswitch”.

•  When a power supply is needed for your satellite 

antenna, follow the procedure below in order to supply 
the voltage specified by your service provider, etc.:
Go to “TV Menu” > “Setup” > “View setting” > “Channel 
settings” > “Antenna setup-DIGITAL” > “Satellite setup” > 
“Change setting” > “Communal satellite system”.

E

DVB-S/S2 channel searching.

 

Press 

c/d to select “Yes”, and then press ;.

•  To change the settings for “Scrambled stations”, 

press 

a/b to select the item to be reconfigured 

and then perform “Search start”.

Yes

No

Scrambled stations

Search start

Start search?

[Yes]

 

The TV searches for and stores all the receivable 
TV stations according to their settings and the 
connected antenna. 

• Select “Yes” to sort the search result in alphabetical 

order.

•  To abort the initial auto installation in progress, 

press 6.

•  Scrambled stations: Specifies if you need to choose 

pay-TV services.

•  Follow the procedure to perform “Manual search” if you 

want to configure the frequency or symbol rate and start 
to search after performing the auto searching during the 
initial auto installation.

 

− Go to “TV Menu” > “Setup” > “View setting” > 

“Channel settings” > “Programme setup” > “Satellite 
setting” > “Manual search”.

If you install a DVB-T/T2/C/S/S2 antenna for the first 
time or relocate it, you should adjust the alignment 
of the antenna to receive a good reception while 
checking the antenna setup screen.

*  857 series only

 

Go to “TV Menu” > “Setup” > “View setting” > 
“Channel settings” > “Antenna setup-DIGITAL”.

 

Press 

a/b to select “Digital setup” or “Satellite 

setup”, and then press 

;.

E

 

Press 

a/b to select “Signal strength”, and then 

press 

;.

Supply voltage

CH No.

Current

Max.

Signal strength

Signal strength

Channel strength

Current

Max.

Quality

Current

Max.

Signal strength

Signal strength

Channel strength

Current

Max.

Quality

E

 

Press 

a/b to select “Channel strength”, and 

then press 

;.

•  You can input a specified frequency band using the 

0_9 numeric buttons.

Supply voltage

CH No.

Current

Max.

Signal strength

MHz

Signal strength

Frequency

Channel strength

Current

Max.

Quality

Supply voltage

Current

Max.

Signal strength

MHz

Signal strength

Frequency
Symbol rate
QAM modulation

Channel strength

Current

Max.

Quality

Current

Max.

Signal strength

MHz

Signal strength

Frequency
Symbol rate
Band

Channel strength

Current

Max.

Quality

Vert/Low

 

Position and align the antenna so that the 
maximum possible values for “Signal strength” 
and “Quality” are obtained.

•  The values of “Signal strength” and “Quality” indicate 

when to check the appropriate alignment of the 
antenna.

You must supply power to the antenna in order 
to receive digitally/terrestrially broadcast stations 
after connecting the antenna cable to the antenna 
terminal on the rear of the TV.

 

Go to “TV Menu” > “Setup” > “View setting” > 
“Channel settings” > “Antenna setup-DIGITAL” > 
“Supply voltage”.

 

Press 

c/d to select “On”, and then press ;.