Sharp LC-60LE831E (serv.man11) Service Manual ▷ View online
59
Command list
CONTROL
ITEM
COMMAND PARAMETER CONTROL CONTENTS
POWER
SETTING
P O W R 0 _ _ _ POWER OFF
(STANDBY)
INPUT
SELECTION A
I
T G D _ _ _ _ INPUT SWITCHING
(TOGGLE)
I
T V D _ _ _ _ TV (CHANNEL FIXED)
I D T V _ _ _ _ DTV (CHANNEL
FIXED)
I A V D * _ _ _ EXT 1_3 (1_3), HDMI
1_4 (4_7), PC (8)
CHANNEL
D C C H *
* _ _ TV DIRECT CHANNEL
(1_99)
C H U P _ _ _ _ CHANNEL UP
C H D W _ _ _ _ CHANNEL DOWN
D T V D *
C H D W _ _ _ _ CHANNEL DOWN
D T V D *
*
* _ THREE DIGIT DIRECT
CHANNEL (1_999)
(Non-Nordic countries)
D T V D *
*
*
* FOUR DIGIT DIRECT
CHANNEL (1_9999)
(Nordic countries
only)*
1
I D E G _ _ _ _ DIGITAL NETWORK
CHANGE*
1
D S C 1 *
*
*
* DVB-S/S2 1 DIRECT
CHANNEL (1_9999)*
1
D S C 2 *
*
*
* DVB-S/S2 2 DIRECT
CHANNEL (1_9999)*
1
D S C 3 *
*
*
* DVB-S/S2 3 DIRECT
CHANNEL (1_9999)*
1
D S C 4 *
*
*
* DVB-S/S2 4 DIRECT
CHANNEL (1_9999)*
1
D T U P _ _ _ _ DTV CHANNEL UP
D T D W _ _ _ _ DTV CHANNEL DOWN
D T D W _ _ _ _ DTV CHANNEL DOWN
INPUT
SELECTION B
I N P 1 0 _ _ _ EXT 1 (Y/C)
I N P 1 1 _ _ _ EXT 1 (CVBS)
I N P 1 2 _ _ _ EXT 1 (RGB)
I N P 1 1 _ _ _ EXT 1 (CVBS)
I N P 1 2 _ _ _ EXT 1 (RGB)
CONTROL
ITEM
COMMAND PARAMETER CONTROL CONTENTS
AV MODE
SELECTION
A V M D 0 _ _ _ TOGGLE
A V M D 1 _ _ _ STANDARD
A V M D 2 _ _ _ MOVIE
A V M D 3 _ _ _ GAME
A V M D 4 _ _ _ USER
A V M D 5 _ _ _ DYNAMIC (Fixed)
A V M D 6 _ _ _ DYNAMIC
A V M D 7 _ _ _ PC
A V M D 8 _ _ _ x.v.Colour
A V M D 1 4 _ _ STANDARD (3D)*
A V M D 1 _ _ _ STANDARD
A V M D 2 _ _ _ MOVIE
A V M D 3 _ _ _ GAME
A V M D 4 _ _ _ USER
A V M D 5 _ _ _ DYNAMIC (Fixed)
A V M D 6 _ _ _ DYNAMIC
A V M D 7 _ _ _ PC
A V M D 8 _ _ _ x.v.Colour
A V M D 1 4 _ _ STANDARD (3D)*
2
A V M D 1 5 _ _ MOVIE (3D)*
2
A V M D 1 6 _ _ GAME (3D)*
2
A V M D 1 0 0 _ AUTO
VOLUME
V O L M *
* _ _ VOLUME (0_60)
POSITION
H P O S *
*
* _ H-POSITION (AV/PC)
V P O S *
*
* _ V-POSITION (AV/PC)
C L C K *
*
* _ CLOCK (0_180)
P H S E *
* _ _ PHASE (0_40)
WIDE MODE
W I D E 0 _ _ _ TOGGLE (AV)
W I D E 1 _ _ _ NORMAL (AV)
W I D E 2 _ _ _ ZOOM 14:9 (AV)
W I D E 3 _ _ _ PANORAMA (AV)
W I D E 4 _ _ _ FULL (AV)
W I D E 5 _ _ _ CINEMA 16:9 (AV)
W I D E 6 _ _ _ CINEMA 14:9 (AV)
W I D E 7 _ _ _ NORMAL (PC)
W I D E 8 _ _ _ CINEMA (PC)
W I D E 9 _ _ _ FULL (PC)
W I D E 1 0 _ _ DOT by DOT (AV/PC)
W I D E 1 1 _ _ UNDERSCAN (AV)
W I D E 1 2 _ _ AUTO (USB-Video/
W I D E 1 _ _ _ NORMAL (AV)
W I D E 2 _ _ _ ZOOM 14:9 (AV)
W I D E 3 _ _ _ PANORAMA (AV)
W I D E 4 _ _ _ FULL (AV)
W I D E 5 _ _ _ CINEMA 16:9 (AV)
W I D E 6 _ _ _ CINEMA 14:9 (AV)
W I D E 7 _ _ _ NORMAL (PC)
W I D E 8 _ _ _ CINEMA (PC)
W I D E 9 _ _ _ FULL (PC)
W I D E 1 0 _ _ DOT by DOT (AV/PC)
W I D E 1 1 _ _ UNDERSCAN (AV)
W I D E 1 2 _ _ AUTO (USB-Video/
Home network-Video)
W I D E 1 3 _ _ ORIGINAL (USB-
Video/Home network-
Video)
MUTE
M U T E 0 _ _ _ TOGGLE
M U T E 1 _ _ _ MUTE
M U T E 2 _ _ _ MUTE OFF
M U T E 1 _ _ _ MUTE
M U T E 2 _ _ _ MUTE OFF
CONTROL
ITEM
COMMAND PARAMETER CONTROL CONTENTS
SURROUND
A C S U 0 _ _ _ SURROUND TOGGLE
A C S U 1 _ _ _ SURROUND ON
A C S U 2 _ _ _ SURROUND OFF
A C S U 4 _ _ _ SURROUND 3D HALL
A C S U 5 _ _ _ SURROUND 3D
A C S U 1 _ _ _ SURROUND ON
A C S U 2 _ _ _ SURROUND OFF
A C S U 4 _ _ _ SURROUND 3D HALL
A C S U 5 _ _ _ SURROUND 3D
MOVIE
A C S U 6 _ _ _ SURROUND 3D
STANDARD
AUDIO CHANGE A C H A _ _ _ _ TOGGLE
SLEEP TIMER
SLEEP TIMER
O F T M 0 _ _ _ OFF
O F T M 1 _ _ _ SLEEP TIMER 30 MIN
O F T M 2 _ _ _ SLEEP TIMER 1
O F T M 1 _ _ _ SLEEP TIMER 30 MIN
O F T M 2 _ _ _ SLEEP TIMER 1
HOUR
O F T M 3 _ _ _ SLEEP TIMER 1
HOUR 30 MIN
O F T M 4 _ _ _ SLEEP TIMER 2
HOUR
O F T M 5 _ _ _ SLEEP TIMER 2
HOUR 30 MIN
TEXT
T E X T 0 _ _ _ TEXT OFF
T E X T 1 _ _ _ TEXT ON (TOGGLE)
T E X T 1 _ _ _ TEXT ON (TOGGLE)
D C P G *
*
* _ DIRECT PAGE JUMP
(100_899)
3D
T D C H 0 _ _ _ 3D OFF
T D C H 1 _ _ _ 2D s 3D
T D C H 2 _ _ _ SIDE BY SIDE
T D C H 3 _ _ _ TOP AND BOTTOM
T D C H 4 _ _ _ 3D s 2D (SIDE BY SIDE)
T D C H 5 _ _ _ 3D s 2D (TOP AND BOTTOM)
T D C H 6 _ _ _ 3D AUTO
T D C H 7 _ _ _ 3D s 2D*
T D C H 1 _ _ _ 2D s 3D
T D C H 2 _ _ _ SIDE BY SIDE
T D C H 3 _ _ _ TOP AND BOTTOM
T D C H 4 _ _ _ 3D s 2D (SIDE BY SIDE)
T D C H 5 _ _ _ 3D s 2D (TOP AND BOTTOM)
T D C H 6 _ _ _ 3D AUTO
T D C H 7 _ _ _ 3D s 2D*
2
DEVICE NAME T V N M 1 _ _ _ DISPLAY THE DEVICE
NAME
MODEL NAME M N R D 1 _ _ _ DISPLAY THE MODEL
NAME
SOFTWARE
VERSION
S W V N 1 _ _ _ DISPLAY THE
SOFTWARE VERSION
IP PROTOCOL
VERSION
I P P Y 1 _ _ _ DISPLAY THE IP
PROTOCOL VERSION
I
830 series only
J
These commands are available only during 3D mode.
Connecting a PC
60
Connecting to the network
To enjoy internet services, you need to connect the
TV to a router with a high speed connection to the
internet. You can also connect the TV to your Home
network server through a router or access point. The
TV connection to the router can either be wired or
wireless.
NOTE
• If you choose a wired connection to the router, you need
an ETHERNET cable (commercially available).
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
• An Ethernet and wireless connection cannot be used at
the same time. Use only one of the connection types.
• A wireless LAN connection and performance cannot
be guaranteed for all residential environments. In the
following cases, the wireless LAN signal may be poor or
drop, or the connection speed may become slower.
−
When used in buildings made with concrete,
reinforced steel, or metal
−
When placed near objects that obstruct the signal
−
When used with other wireless devices that emit the
same frequency
−
When used in the vicinity of microwave ovens and
other devices that emit a magnetic field, electrostatic
charge, or electromagnetic interference
• A stable connection speed is required to play back
streaming content. Use an Ethernet connection if the
wireless LAN speed is unstable.
Wired installation
Use an ETHERNET cable to connect the ETHERNET
terminal on the TV to your broadcast router as
shown below. This is recommended when enjoying
services which require stable connection speeds,
such as streaming media.
E
Wired connection overview
PC
Router (commercially available)
ETHERNET cable (commercially available)
Network
E
How to connect
Router
ETHERNET terminal
LAN
ETHERNET cable (commercially available)
1
Switch on the router (commercially available).
Refer to the router’s operation manual for
switching on.
2
Connect the ETHERNET terminal on the TV
to the router (commercially available) with an
ETHERNET cable (commercially available).
3
Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “Connection type”.
4
Press c/d to select “Wired”, and then press
;.
5
Select “OK” to confirm.
• If you have failed to connect to the internet in the
above operation, an error message will appear. In
this case, press ATV/DTV/SAT/b to return to the
normal TV screen and check the relevant settings.
• If you want to change the IP settings manually, go
to “Menu” > “Setup” > “View setting” > “Network
setup” > “IP setup” and follow the on-screen
instructions and the operation manual of the router.
Network setup
61
Wireless installation
Use the wireless LAN USB adapter supplied with the
TV.
E
Wireless connection overview
PC
Wireless LAN router/access point
Wireless LAN USB adapter (supplied)
Network
NOTE
• When using the SHARP wireless LAN USB adapter
(supplied), try to provide as much free space around the
device for best performance.
• Make sure the firewalls in your network allows access to
the TV wireless connection.
• Operations cannot be guaranteed when used with
access points that do not have Wi-Fi® certification.
• A wireless LAN access point is required to connect
the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.
E
How to connect
1
Switch on your router before starting the
network installation.
2
Connect the wireless LAN USB adapter
(supplied) to the USB 3 (WIRELESS LAN) port on
the rear of the TV.
• Do not use a wireless LAN adapter other than
the supplied SHARP wireless LAN adapter, as
operations cannot be guaranteed.
3
Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “Connection type”.
4
Press c/d to select “Wireless”, and then press
;.
5
Select “OK” to confirm.
6
Press a/b to select “Wireless setup” in the
“Network setup” menu.
7
Press c/d to select “Change”, and then press
;.
8
Press a/b to select “WPS”, and then press
;.
WPS
Search
Manual Setup
• If your router/access point does not support WPS
(= Wi-Fi Protected Setup), select “Search” and
follow the on-screen instructions and the operation
manual of the router/access point.
• To establish the connection manually, select
“Manual setup” and follow the on-screen
instructions and the operation manual of the router/
access point.
9
Press a/b to select “Push button”, and then
press ;.
Push button
PIN code
• To establish the connection manually, select “PIN
code”. Follow the on-screen instructions and the
operation manual of the router/access point.
0
Select “Next” to proceed.
Q
Press the WPS button on the router/access
point. When you press the WPS button, a
progress bar will appear on the display. Wait
until the connection is established.
Select “OK” when the connection details are
Select “OK” when the connection details are
displayed.
• If you have failed to connect to the internet in the
above operation, an error message will appear. In
this case, press ATV/DTV/SAT/b to return to the
normal TV screen and check the relevant settings.
NOTE
• To connect your TV to the internet, you must have a
broadband internet connection.
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
• There is no need to enter the security key for
subsequent connections to the wireless network.
• If your access point is set to a stealth mode (that
prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
• If you want to change the IP settings manually, go to
“Menu” > “Setup” > “View setting” > “Network setup” >
“IP setup” and follow the on-screen instructions and the
operation manual of the router.
• See page 79 to check the supplied SHARP wireless LAN
adapter specifications.
Network setup
62
What is Net TV?
Net TV offers internet service and websites tailored
for your TV. Use the TV remote control unit to
browse the Net TV internet pages. Net TV allows you
to play movies, view pictures, listen to music, play
games, rent a movie from a video store* and much
more. Net TV provides variety of services for each
country. You can browse other countries’ service as
well. If a service is unsuitable for children, you can
lock it as needed.
* Video store can only be used with country-exclusive
special Net TV services.
NOTE
• Because Net TV is an online system, it can be modified
over time to better serve its purpose.
• Some Net TV services may be added, changed or
discontinued after some time.
• Some open internet websites may not be tailored for a
TV screen and may not be displayed correctly.
• You cannot download and save files nor install plug-ins.
DISCLAIMERS
• SHARP corporation bears no responsibility regarding
the content and quality of the content provided by the
content serve provider.
Operations in Net TV
Basic operation
The illustrations on this page are for explanation
purposes. They are subject to change without
notice.
E
Display the start page
Press NET.
• You can also display the Net TV start page with
pressing b and select “NET” or go to “Menu” >
“CH list” > “INPUT” > “NET”.
NOTE
• When switching to Net TV, a message which requests a
software update may display in some cases.
E
Select a service
Press a/b/c/d to select the desired service,
and then press ;.
• Press : r/s to scroll pages up/down (This may
not function for some services).
• Press 6 to return to the previous page (This may
not function for some services).
• Press > to return to the Net TV start page.
E
Exit Net TV
Press ATV/DTV/SAT.
• You can exit from Net TV by pressing b and
select another input source.
Option menu
Press CONTROL and the option menu displays.
Press a/b to select the desired menu item, and
then press ;.
E
User setting
Changes some settings, such as lock/unlock the
service, for Net TV.
NOTE
• This may not function for some services.
1
Select “User setting”, and then press ;.
2
Press a/b/c/d to select the desired
operation, and then press ;.
E
Control panel
Displays an on-screen control panel for watching
online contents.
1
Select “Control panel”, and then press ;.
2
Press a/b/c/d to select the desired
operation, and then press ;.
3
Press > to exit.
Buttons
Description
I
Playback
H
Stop
F
Pause
J
Fast forward
G
Reverse
NOTE
• These operations can also be done by pressing the
corresponding buttons (I/H/F/J/G) on the
remote control unit.
• The control panel may not function on some services.
Net TV
Click on the first or last page to see other LC-60LE831E (serv.man11) service manuals if exist.