Sharp LC-60LE831E (serv.man11) Service Manual ▷ View online
75
Updating your TV via DVB-T/T2*
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated
TV base software and DVB software available.
* 831 series only
View setting
Download setup
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Standby search” >
“Download setup”.
Searching for updates*
* All countries except UK, Sweden and Italy are set to
“No” for this function.
The TV automatically determines whether a new
software version is available when the TV is in
standby mode.
Item
Yes
Automatically searches for new
software updates available when the
TV is in standby mode.
No
Does not search for update
information.
Now
Checks if there is new software
immediately.
Downloading the software
You can select the method of update.
1
If the software is updated, the confirmation
message “New download information has been
detected.” appears.
• If the TV receives the update service while in
standby mode, a confirmation message displays
after turning on the power.
2
Follow the screen prompts.
Item
Yes
Starts downloading immediately.
It takes approximately one hour to
update. You cannot carry out other
operations while downloading.
• Cancels the download by pressing
; on the remote control unit when
“Discontinue” is displayed on the
screen during the update.
No
Starts downloading automatically
several minutes after entering standby
mode.
NOTE
• Do not turn off the MAIN POWER switch or unplug the
AC cord while receiving the data, otherwise it will not be
captured properly.
• Updating the software may take some time.
Getting update information
Information
Message list
When new software is detected, you can confirm the
update information and download the software from
“Message list”.
Go to “Menu” > “Setup” > “Information” >
“Message list”.
NOTE
• When the TV succeeds at downloading new software,
the message is updated in the “Message list” of the
“Information” menu.
• The software update will not be carried out if there is no
new software available at the specified download time.
Information
Receiver report
Display reports regarding failures and changes for
timer settings.
Go to “Menu” > “Setup” > “Information” >
“Receiver report”.
Information
Identification
You can check the TV ID on the screen for reporting
to customer service.
Go to “Menu” > “Setup” > “Information” >
“Identification”.
Appendix
76
Information on the software licence
for this product
for this product
Information
Software licence
You can read the software licences in this menu.
Go to “Menu” > “Setup” > “Information” >
“Software licence”.
E
Software composition
The software included in this product is comprised
of various software components whose individual
copyrights are held by SHARP or by third parties.
Updating your TV via USB/network
Information
Software update
This function allows you to update to the latest
software via a USB device or network.
• To check the availability of the latest software versions,
visit http://www.sharp.eu/software-download/ for links
to the download pages for the appropriate countries.
1
Go to “Menu” > “Setup” > “Information” >
“Software update” > “USB update”.
• You can also update the software through the
network. Go to “Menu” > “Setup” > “Information” >
“Software update” > “Network update” and follow
the on-screen instruction.
• A broadband connection and Network setup are
required to update the software using the internet
(Pages 60–61).
2
Press ; and then insert the USB device
containing the software update file.
CAUTION
• Be sure to insert the USB device correctly into the
terminal.
3
Press > to close the window when a screen
prompt pops up.
4
The TV displays a confirmation screen while
checking the data in the inserted USB device.
CAUTION
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3
after pressing ;.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update
files.
• No data for updating the system exists in the USB
memory.
• The software update file is broken.
• The software update file is not compatible with your
TV’s software.
• The current system is same as the system update
data.
5
The TV displays the software version information
after checking the data.
6
Press c/d to select “Yes” to update the
system, and then press ;.
7
The TV restarts automatically, and the software
update will be complete.
• This operation may take a while.
Appendix
77
Warning regarding basic use
Cautions regarding use in high and low temperature environments
• When the TV is used in a low temperature space (e.g., room, office), the picture
may leave trails or appear slightly delayed. This is not a malfunction, and the TV will
recover when the temperature returns to normal.
• Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the LCD panel to malfunction.
Storage temperature: e 5 °C to e 35 °C.
Devices connected to the protective earthing of the building installation through the
MAINS connection or through other devices with a connection to protective earthing
and to a television distribution system using coaxial cable, may in some circumstances
create a fire hazard. Connection to a television distribution system therefore has to be
provided through a device providing electrical isolation within a certain frequency range
(galvanic isolator, see EN 60728-11).
NOTE
• For requirements in Norway and Sweden, the requirements for isolation are also
relevant for devices that can be connected to television distribution systems.
Trade marks
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other
countries.”
• Manufactured under license from Dolby Laboratories.
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
• The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—
project.
• LC_ LCFONT+ and LC logo mark are registered trademarks of
SHARP Corporation. This product is embedded with LC Font technology, which was
developed by SHARP Corporation for clearly displaying easy-to-read characters on
an LCD screen. However, other non-LCD fonts are used for displaying some screen
pages.
• DivX®, DivX Certified®, DivX Plus
TM
HD and associated logos are trademarks of
DivX, Inc. and are used under license.
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is
an official DivX Certified® device that plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX video.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
• “x.v.Colour” and
are trademarks of Sony Corporation.
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
• DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
• All other company or product names are trademarks or registered trademarks of their
respective companies.
Appendix
78
Appendix
Specifications
Item
LCD COLOUR TV
(60
(60
o/152 cm),
LC-60LE830E
LC-60LE830RU
LC-60LE831E
LC-60LE831S
LC-60LE830RU
LC-60LE831E
LC-60LE831S
LCD COLOUR TV
(52
(52
o/132 cm),
LC-52LE830E
LC-52LE830RU
LC-52LE831E
LC-52LE831S
LC-52LE830RU
LC-52LE831E
LC-52LE831S
LCD panel
152 cm (60o) X-Gen
panel
132 cm (52o) X-Gen
panel
Resolution
1,920 x 1,080 x 4 dots
Video colour system
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
function
TV-
standard
Analogue
CCIR (B/G, I, D/K, L/L’)
Digital
(830 series )
DVB-T (2K/8K OFDM), DVB-C, DVB-S/S2
Digital
(831 series )
DVB-T (2K/8K OFDM),
DVB-T2 (1K/2K/4K/8K/16K/32K OFDM), DVB-C
Receiving
channel
VHF/UHF
IR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch,
I21_I69 ch, IR A_IR J ch
CATV
Hyper-band, S1_S41 ch
Satellite
(830 series
only)
950_2150 MHz*
1
TV-tuning system
Auto Preset 999 ch (non-Nordic [DTV]),
Auto Preset 9999 ch (Nordic [DTV]),
Auto Preset 99 ch (ATV), Auto Label, Auto Sort,
Auto Preset 9999 ch (SAT [830 series only])
Stereo/Bilingual
A2/NICAM
Audio amplifier
10 W x 2 / 15 W x 1
Speaker
(206 mm x 14 mm) x 2/Ø 100 mm
Terminals Antenna
VHF/UHF
75 q Din type (analogue & digital)
Satellite
(830 series
only)
75 q F type (DVB-S/S2)
RS-232C
D-sub 9 pin male connector
EXT 1
SCART (AV input, Y/C input, RGB input, TV output)
EXT 2
RCA pin (AV input/AUDIO L/R)
EXT 3
Component (AV input/Audio L/R)
PC
mini D-sub 15 pin
HDMI 1 (EXT 4)
HDMI (ARC)
HDMI 2 (EXT 5)
HDMI
HDMI 3 (EXT 6)
HDMI
HDMI 4 (EXT 7)
HDMI
USB 1
USB
USB 2 (HDD)
USB
USB 3 (WIRELESS LAN) USB
ETHERNET (10/100)
ETHERNET (10/100)
Network connector
HDMI 2/PC AUDIO (L/R) Ø 3.5 mm jack*
2
DIGITAL AUDIO OUTPUT Optical S/PDIF digital audio output
C. I. (Common Interface) EN50221, R206001, CI Plus specification
OUTPUT/Headphones
C. I. (Common Interface) EN50221, R206001, CI Plus specification
OUTPUT/Headphones
RCA pin (AUDIO L/R)/Ø 3.5 mm jack (audio
output)
SD CARD (VIDEO
STORE)
SD card
OSD language
Czech, Danish, Dutch, English, Estonian,
Finnish, French, German, Greek, Hungarian,
Italian, Latvian, Lithuanian, Norwegian, Polish,
Portuguese, Russian, Slovak, Slovene, Spanish,
Swedish, Turkish, Ukrainian
Power requirement
AC 220_240 V, 50 Hz
Power consumption
(method IEC62087)
198 W
(0.2 W standby*
3
)
155 W
(0.2 W standby*
3
)
Weight
30.5 kg (without stand)
37.0 kg (with stand)
24.0 kg (without stand)
28.0 kg (with stand)
Operating temperature
0 °C to e 40 °C
I
The satellite channel’s frequency may vary according to satellites and antennas.
J
The HDMI 2 and PC terminals can both use the same audio input terminal.
K
Standby power consumption applies when the TV is set to not receive EPG data.
• As a part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
Click on the first or last page to see other LC-60LE831E (serv.man11) service manuals if exist.