Sharp LC-60LE831E (serv.man11) Service Manual ▷ View online
43
Selecting the WSS picture size manually
Option
4:3 mode
The “WSS” signal has 4:3 auto-switching that allows
you to select between “Normal” and “Panorama”.
Go to “Menu” > “Setup” > “Option” > “4:3
mode”.
Item
Normal
Normal range keeping 4:3 or 16:9
aspect ratio.
Panorama
Wide image without side bars.
WSS signal 4:3 screen
4:3 mode “Normal”
4:3 mode
“Panorama”
Terminal setting
Option
Audio select
When using the PC terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (L/R)
jack for analogue audio input.
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Audio select”.
When selecting “HDMI 2” from the “INPUT” menu
Item
HDMI (Digital)
When connecting devices (including a
PC) with a HDMI cable to the HDMI 2
terminal.
HDMI+Analog
When connecting devices (including
a PC) with a DVI/HDMI cable to
the HDMI 2 terminal and inputting
analogue audio signals from the AUDIO
(L/R) jack.
NOTE
• You must set this to “HDMI+Analog” when connecting
devices (including a PC) with an HDMI-certified cable to
the HDMI 2 terminal. If “HDMI (Digital)” is set, there will
be no sound output.
When selecting “PC” from the “INPUT” menu
Item
Video
When connecting devices with an
AV cable to the PC terminal, displays
images without audio.
Video+Audio
When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO (L/R) jack.
Skipping specified inputs
Option
Input skip
This setting allows you to skip the SCART, HDMI,
PC, ATV, DTV or SAT input on the input source
selection operation.
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Input skip”.
Setup
Input skip
Terminal setting
[No]
[No]
[No]
[No]
[Yes]
[No]
[No]
[No]
NOTE
• When you select “ATV”, “DTV” or “SAT”, the skip
function works only when using the # b button
on the front of the TV.
Useful viewing functions
44
Input source settings
Option
Input select
For setting the signal type of external equipment.
1
Press b to select the input source for setting
the input signal (“EXT1”) from the “INPUT”
menu, and then press ;.
2
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Input select”.
Item
EXT1
Y/C, CVBS, RGB
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment
for the signal type.
Option
Input label
You can label each input source with a custom
description.
1
Press b to select the desired input source
from the “INPUT” menu, and then press ;.
2
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Input label”.
3
Select each character of the new name for the
input source with using the software keyboard
(Page 13).
NOTE
• The label can be six characters or less.
• You cannot change labels if the input source is “TV”,
“USB media”, “Home network” or “NET”.
TV
INPUT
Switchable
CH list
Selecting the HDMI picture size
automatically
automatically
Option
HDMI auto view
This function allows you to automatically change to
the appropriate picture size when viewing an HDMI
signal using the HDMI 1, 2, 3 and 4 terminals.
1
Press b to select the input source (“HDMI 1”,
“HDMI 2”, “HDMI 3” or “HDMI 4”) connected to
your HDMI device, and then press ;.
2
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “HDMI auto view”.
Option
Headphone/Audio out select
You can select which device is used for outputting
audio.
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Headphone/Audio out select”.
Item
Headphone
Output audio through headphones.
Audio out
Output audio through an A/V receiver
or surround audio controller.
CAUTION
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound
may damage your hearing.
NOTE
• If you select “Audio out” when a cable is inserted in the
HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are
muted.
• When you select “Audio out”, you can adjust the TV
sound volume with the Yl/k buttons on the TV or
i+/-
i+/-
buttons on the remote control unit.
Option
Colour system
You can change the colour system to one that is
compatible with the image on the screen.
Go to “Menu” > “Setup” > “Option” > “Colour
system”.
NOTE
• The factory preset value is “Auto”.
• If “Auto” is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g., “PAL”, “SECAM”).
Useful viewing functions
45
Screen effect settings
Option
Channel selecting effect
This function shows a screen effect when choosing
or changing channels.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Channel selecting effect”.
Option
Programme title display
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Programme title display”.
NOTE
• This function is available only when the DTV/SAT mode
is selected.
Adjusting image position
Option
Position
For adjusting a picture’s horizontal and vertical
position.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Position”.
Item
H-Pos.
Centres the image by moving it to the
left or right.
V-Pos.
Centres the image by moving it up or
down.
NOTE
• Adjustments are stored separately for each input
source.
• Depending on the input signal type, “Wide mode”
setting or “Video mode” for the USB media mode, a
position setting may not be available.
• This function is not available for DTV broadcasts with
MHEG signals.
• This function is available for 3D images converted from
2D images or normal 2D images.
Useful viewing functions
46
Additional features
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to “Menu” > “Setup” > “Option” >
“Illumination”.
Item
Off
The LED is not illuminated.
Standby
The LED is illuminated while the TV is
in standby mode.
Watch
The LED is illuminated while you watch
TV.
Always
The LED is illuminated all the time.
NOTE
• The factory default for this item is “Watch”. Set to “Off”
if you do not want the LED to illuminate.
• The LED is illuminated in white for 2D mode.
• The LED is illuminated in blue for 3D mode.
Option
Game play time
This function allows you to display the elapsed time
on the screen when “AV mode” is set to “GAME”.
Go to “Menu” > “Setup” > “Option” > “Game
play time”.
Item
On
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off
Hides the time.
NOTE
• This menu is not selectable if the input source is “TV” or
“USB media”.
Option
Key lock
This function allows you to lock the buttons on the
TV or remote control unit in order to prohibit children
from changing the channel or volume.
Go to “Menu” > “Setup” > “Option” > “Key
lock”.
Item
Off
Unlocks the buttons.
RC control lock
Locks all buttons on the remote
control unit.
Button control
lock
lock
Locks the buttons on the TV except
the power switch.
NOTE
• You cannot set both “RC control lock” and “Button
control lock” at the same time.
E
Cancelling the lock
Press @ on the TV and set to “Off” to cancel
the “RC control lock”. Press @ on the remote
control unit and set to “Off” to cancel the “Button
control lock”.
• Refer to page 20 for menu operation using @Z on
the front of the TV.
Useful viewing functions
Click on the first or last page to see other LC-60LE831E (serv.man11) service manuals if exist.