Sharp LC-60LE831E (serv.man11) Service Manual ▷ View online
39
Analogue setting
You can reconfigure the analogue TV channels
settings automatically or manually.
E
Additional search
Use this menu to add new services automatically
after “Analogue search” in the “Auto installation”
menu has been completed.
• Start searching channels after selecting the colour
system and sound system.
E
Manual adjust
Use this menu to set up analogue TV channels
manually.
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
set and then press ;.
Fine
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0_9 numeric buttons.
EXAMPLE
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
Colour sys.
Select the optimum colour system to receive
(“Auto”, “PAL”, “SECAM”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the
“Auto installation” detects the information and
assigns a name to it. However, you can change
channel names individually.
Select each character of the new name for the
channel with using the software keyboard (Page
13).
NOTE
• The name can be five characters or less.
Skip
Channels with “Skip” set to “On” are passed over
when using :r/s even if selected while watching
the image from the TV.
Lock
You can block the viewing of any channel.
NOTE
• See “PIN” for setting a PIN.
• When “Lock” is set to “On” for a channel, “Child lock
has been activated” displays, and the image and sound
of the channel are blocked.
• When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting
the correct PIN unlocks the “PIN” temporarily until the
power is turned off.
E
Sort
Channel positions can be sorted freely.
1
Press c/d to select “Yes”, and then press ;.
2
Press a/b/c/d to select the channel you
want to move, and then press ;.
3
Press a/b/c/d to move it to the desired
position, and then press ;.
4
Repeat steps 2 and 3 until all desired channels
are sorted.
E
Erase programme
Channels can be erased individually.
1
Press c/d to select “Yes”, and then press ;.
2
Press a/b/c/d to select the channel you
want to erase, and then press ;.
• A message window pops up.
3
Press c/d to select “Yes”, and then press
; to erase the selected channel. All the
subsequent channels move up.
4
Repeat steps 2 and 3 until all desired channels
are erased.
Basic adjustment
40
TV start-up time setting
View setting
Quick start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Go to “Menu” > “Setup” > “View setting” >
“Quick start”.
Item
On
The TV quickly starts up from standby.
14 W or more of power consumption is
required during standby.
Off
Power consumption is small during
standby.
Individual setting - PIN
View setting
PIN
Allows you to use a PIN to protect certain settings
from being accidentally changed.
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “PIN”.
NOTE
• PIN input is required when executing “PIN”. The default
PIN is “1234”. To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 74).
E
When selecting “Yes”
Register a four-digit number to use the “PIN”
function.
1
Press c/d to select “Yes”, and then press ;.
2
Enter the four-digit number as a PIN using 0_9
numeric buttons.
3
Enter the same four-digit number as in step 2 to
confirm.
• “The system PIN has been changed successfully”
displays.
4
Press ;.
NOTE
• As a precautionary measure, make a note of your
PIN and keep it in a safe place that children cannot
reach.
reach.
• “0000” cannot be set as the PIN code.
• To view a locked channel, you must enter the PIN (see
pages 38 and 39 for locking channels from viewing in DTV,
SAT and ATV mode). When you select a locked channel,
a PIN prompt message pops up. Press 6 to display the
PIN input window.
PIN input window.
View setting
Parental rating
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
1
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Parental rating”.
2
Repeat steps 1 to 4 in when selecting “Yes” to
the left.
NOTE
• “Universal viewing” and “Parental approval pref.” are
ratings used exclusively in France.
• Refer to page 81 for details about ratings.
Individual setting - Time
View setting
Time display
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Time display”.
Time display
This function allows you to display the clock time in
the lower-right corner of the screen.
Item
On
Displays the clock time.
On (half-hourly)
Displays the clock time in
30-minute increments.
Off
Hides the clock time.
Time format
You can select the time format (either “24HR” or
“AM/PM”) for the clock time.
Basic adjustment
41
Individual setting - Language
View setting
Digital audio language
Set up to three preferred multi audio languages to
display if the audio languages are available.
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Digital audio language”.
E
Switching the multi audio languages
Each time you press 7 on the remote control unit,
the audio language switches.
View setting
Subtitle
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if
subtitles are available.
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Subtitle”.
Selectable items
E
1st language
E
2nd language
E
For hearing impaired
E
Switching subtitle languages
Each time you press [ on the remote control unit,
the subtitle switches.
Off
1st language
2nd language
E
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over
each of the subtitle language settings (e.g., “1st
language”, “2nd language”, etc.).
EXAMPLE
1st language
(For hearing impaired)
1st language
NOTE
• Subtitles will not be displayed when the programme
does not contain subtitle information.
• Subtitles may not be displayed properly in 3D mode.
View setting
Language
You can select an OSD language from among 23
languages. Refer to the OSD language column in
the specification table for the selectable languages
(Page 78).
Go to “Menu” > “Setup” > “View setting” >
“Language”.
Basic adjustment
42
Optional features settings
Go to “Menu” > “Setup” > “Option”.
Setup
Option for view
Option
3D setup
CH list
:Back
:Enter
Menu
AQUOS LINK setup
Terminal setting
Selecting the picture size manually
Option
Wide mode
You can select the picture size. Selectable picture
size varies with the type of signal received.
1
Go to “Menu” > “Setup” > “Option” > “Option
for view” > “Wide mode”.
• You can also select an item by pressing f on the
remote control unit.
• The menu lists the “Wide mode” options selectable
for the type of video signal currently received.
2
Press a/b to select the desired item.
• As you toggle the options, each is immediately
reflected on the screen. There is no need to press
;.
Basically, if you set “WSS” to “On” in the
“Option” menu, the optimum “Wide mode” is
automatically chosen for every broadcast or
programme played using a VCR or DVD player/
recorder.
NOTE
• Even if you select your desired “Wide mode” manually,
the TV may automatically switch to the optimum “Wide
mode” depending on the signal received when “WSS” is
set to “On”.
Item (for SD [Standard-Definition] signals)
Normal
Keeps the original aspect ratio in a full
screen display.
Zoom 14:9
For 14:9 letterbox pictures. A thin
side bar appears on each side, and
you may also see bars on the top and
bottom with some programmes.
Panorama
In this mode, the picture is stretched
toward each side of the screen. The
picture may appear similar to “Full”
depending on broadcast signals.
Full
For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Item (for HD [High-Definition] signals)
Full
Displays with an overscan image.
Crops all sides of screen.
Underscan
Displays with an underscan image
only when receiving a 720p signal.
Displays with the High-Definition image
adjusted optimally. Noise may appear
on the edge of the screen with some
programmes.
Dot by Dot
Displays an image with the same
number of pixels on the screen when
receiving 1080i/1080p signals only.
NOTE
• Some items do not appear depending on the type of
received signal.
• You may not be able to change the wide mode while in
3D mode.
• Refer to page 55 for PC signal inputs.
Selecting the WSS picture size
automatically
automatically
Option
WSS
The “WSS” allows the TV to switch automatically
among the different picture size.
Go to “Menu” > “Setup” > “Option” > “WSS”.
NOTE
• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no “WSS” information, the function will not
work even if enabled.
• This function is available for 3D images converted from
2D images or normal 2D images.
Useful viewing functions
Click on the first or last page to see other LC-60LE831E (serv.man11) service manuals if exist.