Sharp LC-60LE822E (serv.man18) User Manual / Operation Manual ▷ View online
SCART connection
Example of connectable devices
VCR
DVD player/recorder
E
E
E
VCR
Decoder
SCART cable (supplied accessory)/Conversion
cable
SCART cable
SCART cable
NOTE
In cases when the decoder needs to receive a signal from
the TV, make sure to select the EXT 1 terminal to which the
decoder is connected in “Manual adjust” in the “Analogue
setting” menu (Page 34).
You cannot connect the VCR with decoder using a fully wired
SCART cable when selecting “Y/C” under “EXT 1” in the “Input
select” menu.
•
•
Y
P
B
(
C
B)
P
R
(
C
R)
Component connection
Example of connectable devices
VCR
DVD player/recorder
E
E
E
You will enjoy accurate colour reproduction and high
quality images through the EXT 3 terminal when
connecting a DVD player/recorder or other device.
L
R
AUDIO
Y
P
B
(C
B
)
P
R
(C
R
)
(G) (B) (R)
COMPONENT
Stereo conversion
cable*
RGB component
cable (supplied
accessory)/
Conversion cable
The supplied conversion cable (AV cable) is only used for
the EXT 2 terminal, not for the Audio IN/OUT terminal. Use a
stereo conversion cable (commercially available) instead.
*
After connecting
You must select the appropriate input source and
input signal settings for component connection to
enjoy high quality image through the EXT 3 terminal.
Selecting the component signal
Selecting the component signal
Press b to select “EXT 3” from the
“INPUT” menu, and then press ;.
Go to “Menu” > “Setup” > “Option” >
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Input select” >
select “COMPONENT”.
Setting audio output
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “PC input” > “Audio
select” > select “Video+Audio”.
E
1
2
Connecting external devices
VIDEO connection
Example of connectable devices
VCR
DVD player/recorder
Game console
Camcorder
E
E
E
E
E
E
E
You can use the EXT 2 terminal when connecting to a
game console, camcorder, a DVD player/recorder or
other device.
AV cable (supplied accessory)/Conversion cable
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown
below.
Connecting an amplifier with digital/
analogue audio inputs
DIGITAL AUDIO IN
AUX1 IN
L
R
Optical audio cable (for digital audio)
Stereo conversion cable*
Stereo conversion cable*
1
(for analogue audio)
This terminal is also used for headphones. Reduce the volume
before using headphones. Overwhelming sound may damage
your hearing.
The supplied conversion cable (AV cable) is only used for the
EXT 2 terminal, not for the Audio IN/OUT terminal. Use a stereo
conversion cable (commercially available) instead.
After connecting
Digital audio output setting
After connecting an amplifier with digital audio
input and external speakers as shown, you should
set an audio output format compatible with
the programme you are watching or the device
connected.
Go to “Menu” > “Setup” > “Option”
> “Terminal setting” > “Digital audio
output” > select “PCM” or “Dolby
Digital”.
NOTE
When set to “Dolby Digital”, Dolby Digital is output when
the Dolby Digital or Dolby Digital Plus audio formats are
received. When set to “PCM”, PCM is output no matter
what audio formats are received.
When set to “Dolby Digital”, HE-AAC audio formats can
be output as Dolby Digital.
E
•
•
E
*
I
Connecting external devices
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate
compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/
recorder) using a single remote control unit.
NOTE
AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled
to be on sale after the release of this TV.
AQUOS LINK does not work while using time shift functions.
What you can do with AQUOS LINK
One touch recording (DTV/SAT only)
You do not have to search for the remote control unit of your recording device. Press
the
REC E or REC STOP H buttons to start/stop recording what you see on the
recorder.
One touch play
When the TV is in standby mode, it will automatically turn on and play back the
image from the HDMI source.
Single remote control operation
AQUOS LINK automatically recognises connected HDMI devices and you can
control the TV and the devices as if using a universal remote control unit.
Operating title list of external devices
In addition to displaying the TV’s own timer list (Page 20), you can also call up
the external player’s top menu or AQUOS BD player’s/AQUOS recorder’s title list
provided that the devices support AQUOS LINK.
Multiple control of HDMI devices
You can select which HDMI device to operate using the “Link operation” menu or the
< button.
< button.
NOTE
When you use AQUOS LINK, make sure to use a certified HDMI cable.
Point the remote control unit toward the TV, not to the connected HDMI device.
Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified
HDMI cable.
Up to three HDMI recording devices, one AV amplifier and three players can be connected
using this system.
These operations affect the HDMI device selected as the current external source. If the device
does not operate, turn on the device and select the appropriate external source using b.
When you insert/remove HDMI cables or change connections, turn on all connected HDMI
devices before turning on the TV. Confirm that picture and audio are correctly output by
selecting “HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4” from the “INPUT SOURCE” menu.
E
•
•
E
4
4
4
4
4
•
•
•
•
•
•
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI
CEC protocol.
NOTE
Refer to the operation manual of the device to be connected for further details.
After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power
have been turned on. Change the external input source by pressing b, select the appropriate external source and verify the audiovisual
output.
The cables illustrated in the following explanation are commercially available items.
The four buttons (G, I, V, H) connected by a green line are used for time shift operations for the time shift function.
•
•
•
•
AQUOS LINK
Connecting an AQUOS BD player/AQUOS recorder via
the AQUOS AUDIO speaker system
AQUOS BD player/AQUOS
recorder
AQUOS AUDIO speaker system
HDMI-certified cable
Optical audio cable
Connecting an AQUOS BD
player/AQUOS recorder
only
AQUOS BD player/AQUOS recorder
The ARC (Audio Return Channel) function
works only when using the HDMI 1
terminal.
*
AQUOS LINK setup
Basic operation
Go to “Menu” > “Link operation” > “AQUOS
LINK setup” > select the menu you want to
set.
AQUOS LINK control
Set to “On” to enable HDMI CEC functions.
Auto power on
If this is activated, the one touch play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
NOTE
The factory default for this item is “Off”.
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
NOTE
If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS recorder, the external source’s
indication changes (e.g., from “HDMI 1” to “HDMI 1 (Sub)”).
•
•
Selecting channel key
This function allows you to select the channel of the
connected HDMI device using the TV’s remote control
unit.
Press a/b to select the input source of the
connected HDMI device you want to control
using the TV’s remote control unit, and then
press ;.
Press c/d to select “On”, and then press
Press c/d to select “On”, and then press
;.
Using genre info
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included the digital broadcast.
Audio return channel (ARC)
If this function is set to “Auto”, the TV can send audio
data for video content shown on the TV to a connected
audio device with just one ARC-compatible cable. Using
this function eliminates the need to use a separate digital
or analogue audio cable.
Connection for using “Audio return channel”
You need to use ARC-compatible cables/devices and connect
to the HDMI 1 terminal to activate this function. The connection
method is the same as the above
Connecting an AQUOS BD
player/AQUOS recorder only.
1
2
•
AQUOS LINK
Click on the first or last page to see other LC-60LE822E (serv.man18) service manuals if exist.