Sharp LC-50LE751K (serv.man4) User Manual / Operation Manual ▷ View online
●
Recording
It is possible to set a pre-record and post-record time
for timer recordings made without auto time control
(DVB).
This minimises the risk that a part of broadcast is not
recorded due to the broadcast starting earlier and/or
finishing later.
for timer recordings made without auto time control
(DVB).
This minimises the risk that a part of broadcast is not
recorded due to the broadcast starting earlier and/or
finishing later.
●
Hard disks
●
Format external one
It is possible to re-format the hard disk in order to
solve some problems or to delete all data stored on it.
Select this option to start formatting.
solve some problems or to delete all data stored on it.
Select this option to start formatting.
Formatting the hard disk will erase all data stored
on it.
on it.
●
DivX
® VOD
●
DivX
® VOD Register
To activated this option you need to register the
code at www.divx.com/vod, download the VOD log
file and reproduce it in TV.
code at www.divx.com/vod, download the VOD log
file and reproduce it in TV.
●
DivX
® VOD Deregister
Displays the deactivation code necessary to wite off
this TV at www.divx.com/vod.
this TV at www.divx.com/vod.
It is possible to update the software on your SHARP TV.
1
Add the binary file to USB memory root.
2
Insert the memory in any USB side TV set
socket.
socket.
3
Press @ button.
4
With ◄/► select Setup and press OK.
5
Select Control → Software → Software
Update
Update
→ Via USB.
Basic adjustment
Software update via USB
The next screen will appear:
The software version that is currently installed is
displayed.
displayed.
6
Press
V
button to proceed. The TV searches for
a new software file on the USB stick.
If a new software version is available after the
search, a message appears:
search, a message appears:
New software Vx.xx
7
Press
V
button to start loading the new software.
Or press END to end the wizard (the software will
not be updated).
not be updated).
•The updated percentage appears.
8
To make your TV completely ready for use again,
please switch it off and on with the mains switch.
If an Internet connection is available, new software can
be downloaded directly and installed in the TV set.
be downloaded directly and installed in the TV set.
1
Press @ button.
2
With ◄/► select Setup and press OK.
3
Select Control
→ Software → Software
Update
→ Via Internet.
A message regarding data protection will be
displayed.
displayed.
4
If you do not agree with data protection message,
please press
G
to exit. If you agree, please press
V
to continue.
The version of the software that is currently installed
will be displayed.
will be displayed.
5
By pressing
V
the TV connects to the Internet
and scans the update server for new software.
If a new software version is available, a message
appears.
appears.
6
Press
V
to start loading the new software.
If you want to end the wizard, please press END.
7
To make your TV completely ready for use again,
please switch it off and on with the mains switch.
NOTES
•
Please do not switch off the TV by the mains switch
during software updating.
during software updating.
•
The total programming process can take up to 50 minutes
in total.
Software update via Internet
27
Multimedia / Network settings
1
Press
MENU.
2
Select Setup→Multimedia/Network, the next
screen appears:
screen appears:
3
Select the option you want to adjust:
●
Network settings
With this option you can make settings to your network
adapters and the various types of media.
adapters and the various types of media.
●
Networking
The network wizard starts that guides you through all
necessary settings to your network.
necessary settings to your network.
See page
47 for more information.
●
Reset to factory settings
All network settings are reset to factory defaults.
●
Host name
Give your TV set a name so that it can be identified
in the network.
in the network.
●
Proxy server
Do the settings for using a proxy server. The proxy
server wizard will be shown.
See page 47 for more information.
server wizard will be shown.
See page 47 for more information.
●
Multimedia settings
Here you find some settings for Audio.
●
Auto return to music player
The music player will reappear whenever another
dialogue, e.g., music selection is called during play-
back, and no keys are pressed for the set time period.
You can specify when and after which time the music
player reappears (selection options are: no, after 1
min, after 5 min).
dialogue, e.g., music selection is called during play-
back, and no keys are pressed for the set time period.
You can specify when and after which time the music
player reappears (selection options are: no, after 1
min, after 5 min).
Basic adjustment
Connections settings
1
Press
MENU.
2
Select Setup→Connections, the next screen
appears:
appears:
3
Select the connection you want to adjust:
●
Antenna DVB
Allows you to make settings for DVB-T antenna and call
the antenna wizard for the DVB-S antenna.
the antenna wizard for the DVB-S antenna.
●
Antenna DVB-S
The antenna wizard starts guiding you through all
the settings relevant to the DVB-S antenna. The
settings of the DVB-S antenna wizard are explained
in the procedure of initial installation (see page
the settings relevant to the DVB-S antenna. The
settings of the DVB-S antenna wizard are explained
in the procedure of initial installation (see page
10).
●
Antenna DVB-T
Allows you to set whether your DVB-T antenna needs
a supply voltage.
Antennas with an integrated amplifier need a supply
voltage on the antenna line. In this case select Supply
voltage 5V
a supply voltage.
Antennas with an integrated amplifier need a supply
voltage on the antenna line. In this case select Supply
voltage 5V
and confirm with OK.
Otherwise, select No supply voltage and confirm
also with OK.
also with OK.
●
AV connecting settings
In this menu the parameters for the AV and AVS
connection sockets can be adapted.
connection sockets can be adapted.
●
Device at connection AV
Indicate here whether a device is connected and, if
so, which one is connected to the AV socket.
so, which one is connected to the AV socket.
Choose between: No device, DVD player, DVD
recorder, Video recorder, Sat receiver, SetTopBox and
Other equipment.
recorder, Video recorder, Sat receiver, SetTopBox and
Other equipment.
28
Basic adjustment
●
AV standard
Allows you to set the AV standard of the connected
device to AV or AVS.
Normally you leave the setting to Automatic. If the
standard of the connected device is not detected
automatically, you can select the correct standard.
device to AV or AVS.
Normally you leave the setting to Automatic. If the
standard of the connected device is not detected
automatically, you can select the correct standard.
NOTE
• Ask your dealer or consult the operating manual of the
connected device if necessary.
●
Signal type
Allows you to set the signal type of the device
connected to AV or AVS.
connected to AV or AVS.
●
Allow switching voltage
If this function is activated, the video and audio of
an external device connected to the AV connector
(not in AVS) will be automatically reproduced on all
TV broadcast sites when reproduction is started up,
provided that the external unit supplies a switching
voltage.
an external device connected to the AV connector
(not in AVS) will be automatically reproduced on all
TV broadcast sites when reproduction is started up,
provided that the external unit supplies a switching
voltage.
●
HDMI-CEC
Here you can make further settings for comfortably
linking external devices to the TV sets.
linking external devices to the TV sets.
●
Remote TV switch on via HDMI-CEC
Here you can select whether the TV set is to switch
on automatically from standby mode, if HDMI-CEC
capable devices connected to a HDMI input start
playback or display a screen menu.
on automatically from standby mode, if HDMI-CEC
capable devices connected to a HDMI input start
playback or display a screen menu.
●
HDMI-CEC functionality
You can allow or forbid the automatic communication
between the TV set and linked external devices.
between the TV set and linked external devices.
You can display the channel information that you are
watching at this moment by pressing p on the remote
control unit.
watching at this moment by pressing p on the remote
control unit.
In the left lower corner you can see the number and
name of the channel, the transmission time and (if
available) the title of the current programme. The
bar (if available) indicates the progress of the current
programme.
In the right lower corner, the programme info is displayed
additionally for DVB channels.
name of the channel, the transmission time and (if
available) the title of the current programme. The
bar (if available) indicates the progress of the current
programme.
In the right lower corner, the programme info is displayed
additionally for DVB channels.
Channel list
Selecting the channel
you want to watch
Channel information display
(DVB-T /DVB-C only)
1
Press OK and the list of tuned channels will be
displayed.
2
Use ◄/► to select the channel you want to watch
and press OK.
You can watch overall station list or a personal list of
channels by pressing ▲.
channels by pressing ▲.
29
Transmitted audio signal:
0RQR
Mono audio transmission analogue
Dual channel sound transmission (Sound1
/Sound2) analogue
/Sound2) analogue
Dual channel sound transmission (Sound1
/Sound2) digital
/Sound2) digital
Stereo sound transmission analogue
Stereo sound transmission (HEAAC)
Stereo sound transmission digital (PCM)
Dolby digital sound transmission (DD)
Dolby digital sound transmission (DD+)
Dolby digital AAC+ sound transmission
GWV
dts sound transmission
03(*
MPEG sound transmission
3/,,
Dolby Pro Logic II sound transmission
Dolby Virtual Speaker Reference display
Dolby Virtual Speaker Wide
Transmitted audio channels:
DD / dts 1.0 / mono
DD / dts / MPEG 2.0
DD / dts 3.0
DD / dts 4.0
DD / dts 5.0
DD / dts 2.1
DD / dts 3.1
DD / dts 4.1
DD / dts 5.1
(HEAAC)
Basic adjustment
Language/sound selection available
Subtitles available
Channel selection for multi-channel providers
3D mode
HDTV programme
HbbTV mode available from this station
Symbol explanations in the channel
info
Transmitted audio signal:
Transmitted audio channels:
General symbols:
30
Click on the first or last page to see other LC-50LE751K (serv.man4) service manuals if exist.