DOWNLOAD Sharp LC-50LE751K (serv.man4) Service Manual ↓ Size: 17.24 MB | Pages: 64 in PDF or view online for FREE

Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary 
depending on your TV installation and connection.

 



Connect an antenna cable to 
the antenna terminal (Page 8).

 



If necessary, insert a CA 
card into the CI slot to watch 
scrambled broadcasts
 (Page 8.)

 



Plug in the AC cord (Page 8).

Product shape varies in some countries.

 



Turn on the power using a on 
the TV (Page 17).

 



Run the initial auto installation 
(Page 9).

Language, Energy 
Efficiency, country, antenna 
type settings, etc. 

 

Go to Next.

 



 



If necessary, adjust the 
antenna to attain maximum 
signal reception (Page 14).

 



Connect external 
devices such as a 
DVD player/recorder 
as instructed (Pages 
41, 42 and 43).

 



Connect external 
audio devices such as 
speakers/amplifier as 
instructed (Pages 41, 
42 and 43).

In order to receive coded digital stations, a Common 
Interface Module (CI Module) and a CA Card must be 
inserted in the CI slot of the TV.
The CI Module and the CA Card are not supplied 
accessories. They are usually available from your 
dealers.

 

With the side with the 
gold coloured contact 
chip facing the side of 
the CI Module marked 
with the provider’s 
logo, push the CA Card 
into the CI Module as far as it will go. Note the 
direction of the arrow printed on the CA Card.

 

Carefully insert the CI Module in the CI slot with 
the contact side forward. The 
logo on the CI Module must be 
facing outward from the rear of 
the TV. Do not use excessive 
force. Make sure the module is 
not bent in the process.

 

Press MENU and the “MENU” screen is shown.

 

Press 

c/d to select “Extras” menu.

 

Press 

c/d to select “CA module”, and then 

press OK.

•  The content of this menu depends on the provider of 

the CI Module.

General information on CI Module displays.

Adjustment parameters of each CA Card displays.

You can input numerical values such as passwords here.

The content of each screen depends on the provider of 
the CI Module.

• 

Make sure that the CI module is properly inserted.

• 

This menu is only available for digital stations.

• 

It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first 
time. This process may fail when there is no antenna input or you have never run “Auto installation”. 

• 

The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You 
can only use the power button during upgrading.

• 

The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out. 

• 

If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the 
screen prompts.

AC cord

Carefully insert the CI 
Module in the CI slot 
with the contact side 
forward.

The logo on the CI 
Module must be 
facing outward from 
the rear of the TV.

Place the TV close to the 
AC outlet, and keep the 
power plug within reach.

Product shape varies 

in some countries.

Standard 
DIN45325 plug 
(IEC 169-2) 75

q 

coaxial cable.

When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings one 
after another.

1  Press a on the TV.

•  The initial auto installation wizard appears.
•  The auto installation can also be called in the TV menu, 

see Repeat initial installation on page 40.

•  The routine of the first installation wizard depends on 

the selected settings.

2  Setting the menu language.

Press

 

a/b/c/d 

to select the desired language.

Proceed with 

J 

button.

3  Setting Energy Efficiency.

Decide how efficiently you want to operate your TV 
set.

•Home Mode: 
The emphasis for home use is on low energy 
consumption.

•Shop Mode:
The picture settings are aligned to operate in the 
presentation room. If the ambient brightness diminishes, 
the energy consumption is not reduced.

This setting can be changed later in the MENU 
Extras

→Energy Efficiency.

Proceed with

 J

 

button.

4  Selecting the TV location.

Press ▲/▼/◄/► to select your country or area.

•  This setting screen only appears during the initial auto 

installation.

Proceed with

 J

 

button.

5  Select broadcast settings.

Press ▲/▼ to move between different tune type.
Press OK to select the desired antenna.

 

   analogue broadcast via cable/

antenna.

Digital broadcast.

Cable digital broadcast.

Satellite broadcast. (Only 752/754 series)

Proceed with

 J

 

button.

6  Select subtitles and audio languages.

Press

 

a/b/c/d and OK 

to select the desired 

languages and alternative languages for subtitles 
and audio for DVB programmes.

 

Proceed with 

J

 

button.

•To set up audio commentary for the visually impaired, please 

see Audio commentary on page 25.

If you have not selected DVB-T antenna in the antenna 
selection, continue with Setting options for DVB-C 
reception

 on page 10.

7  Selecting tuner settings.

 

●

 

● 

You can specify if coded stations are to be searched 
for in the search/update.
Select yes to save all scrambled stations.

•These stations can only be received in connection with a CI 

module and the appropriate CA Card.

•If a CI module with a CA Card is already inserted for the station 

search, all the stations which this module can descramble are 
also saved when no is selected.

 

●

 

● 

 Select 

 if you want to run the 

station search independently of the channel grid.

 

● 

 

In various countries, digital stations are transmitted 
with a preset channel number per station, known as 
"Logical Channel  Numbers" (LCN).
If you select yes, these default channel numbers will 
be used and the channels  will be sorted as per LCN. 

 

E Is the antenna cable connected?

 

E Is the AC cord plugged in?

USB REC

• 

The value of Frequency and Network ID should 
be set to the value specified by the cable provider.

Press 

J

 to continue.

If you have not selected a DVB-S antenna in the 
antenna selection, continue with Settings for all types 
of reception

 on page 13.

Select the satellite system.

Specify how you receive which satellite(s) (single 
satellite or type of satellite system). Ask your dealer in 
this regard.
The normal DVB-S settings are derived from the 
selection of the location and do not need to be changed 
in most cases.

● 

Reception of a single satellite via a connected LNC 
(LNB). See page 11 for settings.

● 

Reception of two different satellites with two LNCs 
(LNBs) which are connected to the TV set by a 22 
kHz switchbox. See page 11 for settings.

● 

 

Reception of two different satellites with two LNCs 
(LNBs) which are connected to the TV set by a 
toneburst switch. See page 11 for settings. 

● 

The TV set controls a DiSEqC multiswitch to which 
up to four LNCs (LNBs) for different satellites are 
connected. See page 11 for settings.

● 

 

Select setting if the TV set is connected to a DiSEqC 
single cable system (according to EN50494). Several 
satellite receivers can be connected to one satellite 
cable. See page 12 for settings.

● 

 

Select this setting if the TV set is connected to a 
single-cable system (without DiSEqC). Several 
satellite receivers can be connected to one satellite 
cable. As opposed to a DiSEqC one cable system 
there are restrictions in the range of certain reception 
frequencies in common single-cable community 
systems. See page 13 for settings.

Press 

J

 to continue

If you have not selected DVB-C antenna in the 
antenna selection, continue with Setting options for 
DVB-S reception

 below.

The normal DVB-C settings are derived from the 
selection of the location and do not need to be changed. 

Press ▲/▼/◄/► to change each item to the appropriate 
settings:

 

●

 

● 

If several networks are available via DVB-C, you 
can decide which network you want to receive your 
channels from.

 

●

 

● 

You can specify if coded stations are to be searched 
for in the search/update.
Select yes to save all scrambled stations.

•These stations can only be received in connection with a CI 

module and the appropriate CA Card.

•If a CI module with a CA Card is already inserted for the station 

search, all the stations which this module can descramble are 
also saved when no is selected.

 

●

 

● 

If you select Frequency Search, a search is 
performed for all receivable stations. With Network 
Search

, only the stations which the networks 

supply are searched, either for all receivable 
networks or only for the particular network specified 
under Network ID.

 

●

 

● 

 

The DVB stations are only searched for in the 
frequency range above the start frequency.

 

●

 

● 

Change this setting to register only the specified 
network ID.

 

●

 

● 

In various countries, digital stations are transmitted 
with a preset channel number per station, known as 
"Logical Channel  Numbers" (LCN).
If you select yes, these default channel numbers will 
be used and the channels  will be sorted as per LCN. 

8  Supplying power to the antenna.
 

If you use a DVB-T antenna that requires a supply voltage 
and which is not supplied via a power adapter, then select 
yes (5V)

 for the antenna's power supply.

Press 

J

 

button. 

How to align your DVB-T antenna is described on 
page 14.

9  Continue with Settings for all types of reception 
 

(See page 13).