DOWNLOAD Sharp LC-50LE751K (serv.man4) Service Manual ↓ Size: 17.24 MB | Pages: 64 in PDF or view online for FREE

option contains additional functions and 

settings:

● 

In this option you can find your saved Timer Instructions.

● 

 

All programmed recordings, programmed 
reminders and copies are listed in this screen.
Also it is possible to programme new recordings.

•Create newly

Create new timer instruction.

With  ▲/▼/◄/►

 

select  Create newly and 

press OK.

With ▲/▼/◄/►

 

select New recording  and 

press  OK. The function list for recording will 
be opened:

● 

Programme the recording manually. See page 51.

● 

Record currently watched programme.
Menu item will only be indicated when EPG data 
is available for the current station. See page 50.

● 

Record following programme.
Menu item will only be indicated when EPG data 
is available for the current station. See page 50.

● 

Programme recording of a programme via the 
electronic programme guide (EPG). See page 
50.

● 

Opens the USB REC archive. See page 51.

With  ▲/▼/◄/►  select the desired option 
and press

 

 

to proceed.

-New copy
You should copy recordings that you want to save 
permanently on an external USB hard disk.

With  ▲/▼/◄/►

 

select  Create newly and 

press OK.

With ▲/▼/◄/►

 

select New copy and press 

. The function list for USB REC archive 

will be opened. See page 49.

With  ▲/▼/◄/►  select the desired option 
and press

 

 

to proceed.

-New memo (EPG event)
You can set a timer as a reminder for programmes 
which have not yet  started.

With  ▲/▼/◄/►

 

select  Create newly and 

press OK.

With  ▲/▼/◄/►

 

select  New memo and 

press OK. The EPG will be called.

The TV will ask at the beginning of a programme if it 
should change the channel accordingly.
-Delete
Use this function in the overview of timer 
instructions if you want to delete recordings already 
programmed or end a running timer recording.

With ▲/▼/◄/►

 

select Delete and press OK.

With  ▲/▼

 

select the timer instruction to be 

deleted and press OK. Ahead of the entry 
appears a delete icon      .

With  ▲/▼/◄/►  select  Confirm delete 
option and press

 

 

to delete timer 

instructions.

Select Cancel to return to Timer Instructions.

• 

When you have programmed timer recordings, the TV 

can only be switched off in the standby mode.

● 

This option allows you to have the TV software version 
always updated. You can download new software from 
different sources:

● 

 

● 

 

Current software version can be downloaded from 
the SHARP Internet site and installed on your TV 
using a USB memory.

 

Here you can find all settings and adaptabilies of the 
TV set. 

● 

Allows you to adjust the settings according to the 
representation of the picture signal on the TV.
See page 21 for more information.

● 

Allows you to find the settings for sound playback.
The sub-items of the menu depend on the currently 
selected sound component.
See page 21 for more information.

● 

Move and delete TV and radio stations. In addition to 
that you can automatically and manually update the 
complete station list. The stations can also be arranged 
and optionally sorted in personal lists.
See page 22 for more information.

● 

In this menu you find settings for additional functions of 
the TV set such as digital recorder (USB REC) as well as 
interfuctional settings like time and date, parental lock 
or software update.
See page 24 for more information.

● 

In this menu you can configure your network adapter 
and network access. Also you can make settings for 
video and music playback here. 
See pages 28 and 47 for more information.

● 

In this menu you can configure external devices that are 
connected to the TV.
See page 28 for more information.

● 

 

The software update wizard appear.

● 

 

The software update wizard appear.

See page 27 for more information.
● 

● 

Decide how energy efficient the TV shall be.

●

: 

The emphasis for home use is on low energy 
consumption.
The automatic dimmer is activated.

●

The picture settings are aligned to operate in 
the presentation room. The automatic dimmer is 
deactivated. If the ambient brightness diminishes, the 
energy consumption is not reduced.

● 

In order to receive coded digital stations, a Common 
Interface Module (CI Module) and a CA Card must be 
inserted in the CI slot of the TV. 
See page 8 for more information.

● 

● 

 

Shows information about TV's integrated features.

● 

 

This option allows you to repeat all steps for initial 
installation. See the procedure at page 9.

• 

All stored stations and all personal lists will be deleted.

● 

 

Allows you to reset Picture/Sound and Network 
settings.

● 

Allows you to select the AV source.
If the selected AV source provides a signal it should be 
visible now.

E

•  Be sure to turn off the TV and any devices before making any connections.
•  Firmly connect a cable to a terminal or terminals.
•  Carefully read the operation manual of each external device for possible connection types. This also helps you get 

the best possible audiovisual quality to maximise the potential of the TV and the connected device.

The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and connect 
the device.

NOTE
•  The cables illustrated in pages 41, 42 and 43 are commercially available items.

(HDD)

ETHERNET

(10/100)

USB

HDMI / PC
ANALOG
AUDIO
INPUT

SERVICE

PC IN

P

R

P

B

Y

VIDEO

SCART (AV/RGB/S-VIDEO)

(WIFI)

SPDIF

(LE*52
series)

SAT

(RCA)

USB

1

(ARC)

2

3

C.I.

Audio cable

Audio cable

Audio cable

HDMI-certified cable

DVI/HDMI Cable

ø 3.5 mm stereo mini jack cable

AV cable

SCART cable

Components cable

Audio cable

HDMI-certified cable

The HDMI connections permit digital video and audio 
transmission via a connection cable from a player/
recorder. The digital picture and sound data are 
transmitted without data compression and therefore 
lose none of their quality. Analogue/digital conversion 
is no longer necessary in the connected devices, which 
also would result in quality losses.

Using a cable DVI/HDMI, the digital signals of a DVD 
video, can also be reproduced through a compatible 
HDMI connection. The sound should be supplied 
additionally.

• On connecting a DVI/HDMI cable to the HDMI terminal, the 

picture may not be visualised clearly.

• Both HDMI and DVI use the same method of HDCP 

protection against copy.

• For connecting a DVI cable, a commercially available adaptor 

(not supplied) is necessary.

• 

Depending on the type of HDMI cable used, a video noise 
may appear. Be sure to use a certified HDMI cable. 

• 

On reproducing HDMI picture, the best format is 
automatically detected and adjusted for the picture

.

576i, 576p, 480i, 480p, 1080i, 720p, 1080p

You will enjoy accurate colour reproduction and high 
quality images through the INPUT COMPONENTS / 
AV terminal when connecting a DVD player/recorder or 
other device.

You can use the COMPONENTS/AV terminal when 
connecting to a game console, camcorder, a DVD 
player / recorder or other device.

● VCR ● DVD player/recorder

● Blu-ray player/recorder

● DVD player/recorder ● Blu-ray player/recorder

● Game console

HDMI / PC
ANALOG
AUDIO
INPUT

(ARC)

Audio cable

Components 
cable

AV cable

● VCR ● DVD player/recorder

● Blu-ray player/recorder

● Game console ● Camcorder

Y

P

B

(

C

B)

P

R

(

C

R)

RCA / ø 3.5 mm 
stereo mini jack cable

DVI/HDMI 
cable

HDMI-certified 
cable