DOWNLOAD Sharp LC-46LE831E (serv.man20) Service Manual ↓ Size: 5.19 MB | Pages: 85 in PDF or view online for FREE

•  Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
•  Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components 

of the main unit cabinet or cause cracking.

•  Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
•  If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in 

neutral detergent diluted with water and thoroughly wrung out, and then wipe with a 

soft dry cloth.

•  Avoid using benzene, thinner, and other solvents, as these may deform the cabinet 

and cause the paint to peel off.

•  Do not apply insecticides or other volatile liquids. Also, do not allow the cabinet to 

remain in contact with rubber or vinyl products for a long period of time. Plasticizers 

inside the plastic may cause the cabinet to deform and cause the paint to peel off.

•  Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To 

protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth 

(wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.

• Wiping with a hard cloth or using strong force may scratch the surface of the front 

panel.

• Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may 

scratch the surface of the front panel when wiped strongly).

•  If the front panel is dusty, use an anti-static brush, which is commercially available, to 

clean it.

Prevention of accidental ingestion
•  Keep the batteries and band accessory out of the reach of small children. Small 

children can accidentally swallow these parts.
—If a child accidentally swallows any of these parts, seek immediate medical 

attention.

Do not disassemble
•  Do not disassemble or modify the 3D glasses.

Caution for lithium battery
•  Batteries must not be exposed to excessive heat such as direct sunlight or fire.
•  Replace only with the same or equivalent type of battery. The battery may explode if 

improperly replaced.

•  The 3D glasses turn off automatically.
Handling the 3D glasses
•  Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the 

glass section, which may result in injury.

•  Be careful not to trap your finger in the hinge section of the 3D glasses. Doing so 

may result in injury.
—Pay special attention when children are using this product.

Using the 3D glasses
•  The 3D glasses vision should be limited. Security advisory establishes a maximum of 

3 hours visualization, and in any case no more than one show length, break included.

•  Use only the 3D glasses recommended for this TV.
•  Use the 3D glasses only for the specified purpose.
•  Do not move around while wearing the 3D glasses. The surrounding area appears 

dark, which may result in falling or other accidents that may cause injury.

Caring for the 3D glasses
•  Use only the cloth provided with the 3D glasses to clean the lenses. Remove dust 

and soil from the cloth. Any dust or other soiling on the cloth may result in scratches 

on the product. Do not use solvents such as benzene or thinners as doing so may 

cause the coating to peel off.

•  When cleaning the 3D glasses, take care not to allow water or other fluids to come 

into contact with the glasses.

•  Always store the 3D glasses in the case provided when not in use.
•  When storing the 3D glasses, avoid very humid or hot locations.
Viewing 3D images 
•  If you experience dizziness, nausea, or other discomfort while viewing 3D images, 

discontinue use and rest your eyes.

•  Do not use the 3D glasses if they are cracked or broken.

To prevent the spread of fire, keep candles or other open flames 

away from this product at all times.

Remote control unit ( x 1)

LR03 (“AAA” size alkaline) 

battery ( x 2)

Cable tie ( x 1)

Pages 6 and 8

Page 6

Page 9

Stand unit ( x 1)

Wireless LAN USB 

adapter (WN8522D 7-JU) 

( x 1)

For 46 inch models

For 40 inch models

Page 5

Page 5

Page 61

Initial setup guide 

(printed document)

USB memory 

(operation manual)

Important safety 

precautions 

(printed document)

The listed optional accessories are available for this LCD colour TV. Please 

purchase them at your nearest shop.

•  Additional optional accessories may be available in the near future. When purchasing, 

please read the newest catalogue for compatibility and check the availability.

1

Wall mount bracket 

(40 inch models)

AN-37AG2

The centre of the TV screen is 0.5 mm 

below the mark “A” on the wall bracket.

2

Attachment 

(40 inch models)

AN-37P30

3

Wall mount bracket 

(46 inch models)

AN-52AG4 The centre of the TV screen is 2 mm 

below the mark “b” on the wall bracket.

4

3D glasses

AN-3DG10-

S/R/A

S (silver)/R (red)/A (blue)

5

3D glasses

AN-3DG20 Refer to the operation manual of the 3D 

glasses for details regarding usage.

•  Before performing work, spread cushioning over the 

surface on which you will be laying the TV. This will 

prevent it from being damaged.

•  Attach the stand in the correct direction.

•  Be sure to follow the instructions. Incorrect 

 

Confirm that there are screws with the stand 

unit.

 

1 For 46 inch models 

 

2 For 40 inch models

 

Attach the supporting post for the stand unit 

onto the base using the long screws with a 

screwdriver as shown.

Supporting 

post

 



46 inch models

 



40 inch models

 

Insert the stand into the openings on the bottom 

of the TV (hold the stand so it will not drop from 

the edge of the base area).

Soft cushion

 



46 inch models

 



40 inch models

 

Insert and tighten middle screws into the holes 

on the rear of the TV.

 



46 inch models

 



40 inch models

 

Attaching the stand cover.

 

1

Insert the stand cover.

 

2

Insert and tighten a short screw into the hole 

of the stand cover.

•  To detach the stand unit, perform the steps in reverse 

order.

•  A screwdriver is not supplied with this product.

•  The TV can be rotated up to 20 degrees to the right and 

left.

Before using the TV for the first time, insert the two supplied LR03 (“AAA” size 

alkaline) batteries. When the batteries become depleted and the remote control 

unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) 

batteries.

 

Open the battery cover.

 

Insert the two supplied LR03 (“AAA” size alkaline) 

batteries.

•  Place batteries with their terminals corresponding to the (e) 

and (f) indications in the battery compartment.

 

Close the battery cover.

Improper use of batteries can result in chemical leakage or explosion. Be sure to 

follow the instructions below.

•  Do not mix batteries of different types. Different types of batteries have different 

characteristics.

•  Do not mix old and new batteries. Mixing old and new batteries can shorten the life of 

new batteries or cause chemical leakage in old batteries.

•  Remove batteries as soon as they have worn out. Chemicals that leak from batteries 

can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

•  The batteries supplied with this product may have a shorter life expectancy due to 

storage conditions.

•  If you will not be using the remote control unit for an extended period of time, remove 

the batteries from it.

•  When replacing the batteries, use alkaline batteries instead of zinc-carbon ones.

The batteries provided contain no harmful materials such as cadmium, lead or 

mercury.

Regulations concerning used batteries stipulate that batteries may no longer be 

thrown out with the household rubbish. Deposit any used batteries free of charge 

into the designated collection containers set up at commercial businesses.

Use the remote control unit by pointing it towards the remote control sensor. 

Objects between the remote control unit and sensor may prevent proper 

operation.

5 m

Remote control sensor

•  Do not expose the remote control unit to shock. In 

addition, do not expose the remote control unit to 

liquids, and do not place in an area with high humidity.

•  Do not install or place the remote control unit under 

direct sunlight. The heat may cause deformation of the 

unit.

•  The remote control unit may not work properly if the 

remote control sensor of the TV is under direct sunlight 

or strong lighting. In such cases, change the angle of 

the lighting or the TV, or operate the remote control unit 

closer to the remote control sensor.