Sharp LC-46LE831E (serv.man20) User Manual / Operation Manual ▷ View online
11
Inserting the CA card into the CI
module
module
In order to receive coded digital stations, a common
interface module (CI module) and a CA card must be
inserted in the CI slot of the TV.
1
Carefully insert the CI module in the CI slot with
the contact side forward.
2
The logo on the CI module must be facing
outward from the rear of the TV.
Checking CI module information
Go to “Menu” > “Setup” > “Option” > “CI
menu”.
• This menu is only available for digital stations.
• The content of this menu depends on the provider
of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords
here.
NOTE
• It takes a few minutes to certify the licence key when
you insert a CA card into the CI+ compatible CI module
for the first time. This process may fail when there is no
antenna input or you have never run “Auto installation”.
• The CI+ compatible CI module sometimes upgrades its
firmware. You may not receive any TV images before
upgrading. You can only use the power button during
upgrading.
• Copy protected content may not be output or may be
output with a copy control signal. The protect icon* is
displayed when P.INFO is pressed while watching copy
protected contents.
* Protect icon: X
• If the TV displays an update confirmation message for
the CA card while receiving CI+ compatible broadcasts,
follow the screen prompts.
• Make sure that the CI module is properly inserted.
Quick guide
12
Quick guide
Using the Menu screen
You need to call up the OSD to perform settings for the TV. The OSD for the
settings is called “Menu”. The “Menu” enables various settings and adjustments.
LCFONT
This product is embedded with LC Font technology, which was developed
by SHARP Corporation for clearly displaying easy-to-read characters on LCD
screens.
Basic operation
1 Display the Menu screen
Press @ and the “Menu” screen displays.
2 Select an item
The “Menu” is classified by setting categories for improving TV viewing.
See the right column for details on the operations in the “Menu” screen.
3 Exit the Menu screen
The operation will exit the “Menu” screen if you press > before it is
completed.
NOTE
• “Menu” options differ in the selected input modes, but the operating procedures are the
same.
• Items with 4 cannot be selected for various reasons.
• Some items cannot be selected depending on signal types, optional settings or
connected devices.
About the guide display
The guide display below the menu bar shows
operations for the OSD.
• The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
Setup
CH list
:Back
:Enter
:Select
Tips:
Selecting in the Menu
Selecting in the Menu
Press c/d to select the desired menu,
and then press ;. Press 6 to return to
the previous menu category.
Press c/d to select the desired sub-
menu, and then press ;.
Press a/b to select the item you want to
select/adjust, and then press ;.
Setup
Backlight
AV mode
Picture
OPC
[Off]
CH list
:Back
:Enter
Menu
3D brightness boost
[Middle]
Selecting options
Press a/b or c/d
to configure the
control for improving
TV viewing, and then
press ;.
EXAMPLE
Backlight
Yes
No
NOTE
• Refer to the guide display
below the menu bar to
see when to press the
; button.
Regarding the instructions in the manual
In this manual, the following expression is often used in order to simplify
instructions.
• Go to “Menu” > “Setup” > ...
This indicates how to navigate through the menu screen using the a/b/
c/d and ; buttons.
13
Using Software keyboard
Use the software keyboard when you need to input text.
Char.Set
Caps
Done
Cancel
SP
Delete
Clear
Cursor Left
Caps
Char.Set
Cursor Right
1
8
7
6
2
3
4
9
10
11
5
1
Char. Set
Changes character
set into the alphabet,
numbers, symbols, etc.
2 Caps
Changes characters to
capital/lower case.
3 Done
Confirm the entry.
4 Cancel
Abort input and close
the software keyboard.
5 R/G/Y/B (Colour)
buttons
Selects the coloured
items on the screen.
6 Input cursor
Press c/d to move the
cursor when highlighted.
7 Input field
The text you enter is
displayed as you type
it in.
8 Character
Input characters by
using these buttons.
9
?
Put a line break.
0 Clear
Erases the character
string.
• When the cursor is
somewhere in a line:
the character string to
the right of the cursor
will be erased.
• When the cursor is at
the right end of a line:
the entire line will be
erased.
Q Delete
If the cursor is at the
right end of a line,
this erases text one
character at a time.
• You can also delete
text by pressing 6
on the remote control
unit.
Quick guide
14
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Confirm the following before turning on
the power
the power
E
Is the antenna cable connected?
E
Is the AC cord plugged in?
E
Is the MAIN POWER switch turned on (;)?
Important information:
Satellite services are only available for the 830 model
series.
1
Press <a on the TV.
• The initial auto installation wizard appears.
2
Setting the OSD language.
Press a/b/c/d to select the desired language, and
then press ;.
3
Selecting the location of the TV.
HOME
STORE
Press c/d to select where you will use this TV, and
then press ;.
• The confirmation screen pops up only when
selecting “STORE”. Press c/d to select “Yes” or
“No”.
• HOME: “STANDARD” will be the default value for
the “AV mode” setting.
• STORE: “DYNAMIC (Fixed)” will be the default
value for the “AV mode” setting. If the “AV mode”
is changed, the TV will automatically switch back
to “DYNAMIC (Fixed)” when there is no operation
using the TV or remote control unit for 30 minutes.
• STORE: A demonstration image will be displayed
after initial auto installation is completed. If you
have chosen “STORE” by mistake, go to “Setup” >
“View setting” > “Reset” > select “HOME” again.
4
Setting the country.
Press a/b/c/d to select your country or area, and
then press ;.
• This setting screen only appears during the initial
auto installation.
NOTE
• Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
5
Setting the PIN.
1
Press c/d to select “Yes”, and then press
;.
• When “No” is selected, the PIN code setting is
skipped.
2
Enter a four-digit number as a PIN using the
0–9 buttons.
3
Enter the same four-digit number as in step
2 to confirm.
4
Press ;.
NOTE
• When “France” is selected in the country setting, the
PIN code setting cannot be skipped.
• “0000” cannot be set as the PIN code.
• When the PIN code setting is skipped, the default PIN
code (“1234”) will automatically be set.
• To change the PIN setting, refer to Individual setting –
PIN
(Page 40). To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 74).
6
Starting channel search.
Digital search
Analogue search
Satellite search
Press a/b to select “Digital search”, “Analogue
search” or “Satellite search”, and then press ;.
• (830 series only) After performing “Digital search”
or “Analogue search”, the screen switches to the
“Satellite search” setting. You should then execute
“Yes” if you want to search for satellite channels.
• To watch both digital broadcasts and analogue
broadcasts, you should perform “Digital search” or
“Analogue search” from “Auto installation” under
the “Setup” menu (Page 37).
• When you select “Satellite search”, only satellite
broadcasts will be searched.
• If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup”
menu (Pages 37_39).
NOTE
• If you turn off the power on the TV while performing a
channel search, the initial auto installation wizard will
not appear. The auto installation function allows you
to execute the installation again from “Setup” > “View
setting” (Page 37).
• The initial auto installation wizard will abort if you leave
the TV unattended for 30 minutes before searching for
channels.
• When “Italy” or “France” is selected in the country
setting, the default age restriction value is set to 18.
Initial auto installation
Click on the first or last page to see other LC-46LE831E (serv.man20) service manuals if exist.