Sharp LC-46LE820E (serv.man16) User Manual / Operation Manual ▷ View online
Updating your TV via DVB-T
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated TV
base software and DVB software available.
View setting
Download setup
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Standby search” >
“Download setup”.
Searching for updates*
All countries except UK, Sweden and Italy are set to “No” for
this function.
The TV automatically determines whether a new software
version is available when the TV is in standby mode.
Item
Yes
Automatically searches for new software
updates available when the TV is in
standby mode.
No
Does not search for update information.
Now
Checks if there is new software
immediately.
Downloading the software
You can select the method of update.
If the software is updated, the confirmation
message “New download information has
been detected.” appears.
If the TV receives the update service while in standby
mode, a confirmation message displays after turning on
the power.
Follow the screen prompts.
Item
Yes
Starts downloading immediately. It takes
approximately one hour to update. You
cannot carry out other operations while
downloading.
Cancels the download by pressing
; on the remote control unit when
; on the remote control unit when
“Discontinue” is displayed on the screen
during the update.
during the update.
•
No
Starts downloading automatically several
minutes after entering standby mode.
NOTE
The TV must remain in standby mode for download. Do not
turn off the power using >a on the TV.
Updating the software may take some time.
*
1
•
2
•
•
Getting update information
Information
Message list
When new software is detected, you can confirm the
update information and download the software from
“Message list”.
Go to “Menu” > “Setup” > “Information” >
“Message list”.
NOTE
When the TV succeeds at downloading new software, the
message is updated in the “Message list” of the “Information”
menu.
The software update will not be carried out if there is no new
software available at the specified download time.
Information
Receiver report
Display reports regarding failures and changes for timer
settings.
Go to “Menu” > “Setup” > “Information” >
“Receiver report”.
Information
Identification
You can check the TV ID on the screen for reporting to
customer service.
Go to “Menu” > “Setup” > “Information” >
“Identification”.
•
•
Appendix
Appendix
Updating your TV via USB
Information
Software update
This function allows you to update to the latest software
using a USB device. You must update the software
through the USB terminal.
To check the software version for the TV, use the URL shown
on the back cover.
Go to “Menu” > “Setup” > “Information” >
“Software update”.
Press ; and then insert the USB device
Press ; and then insert the USB device
containing the software update file.
CAUTION
Be sure to insert the USB device correctly into the terminal.
•
1
2
•
The TV displays a confirmation screen while
checking the data in the inserted USB device.
CAUTION
If the data is not compatible with the system, an error message
appears on the screen. Repeat steps 2 and 3 after pressing
;.
;.
When an error message displays, check to see if:
The USB device is inserted firmly.
The USB memory has two or more software update files.
No data for updating the system exists in the USB
memory.
The software update file is broken.
The software update file is not compatible with your TV’s
software.
The current system is same as the system update data.
The TV displays the software version
information after checking the data.
Press c/d to select “Yes” to update the
Press c/d to select “Yes” to update the
system, and then press ;.
Press ; to automatically reset and start the
Press ; to automatically reset and start the
update operation.
This operation may take a while.
The TV starts updating the system
A confirmation message appears on the
screen after completing the update and
then automatically restarts the TV. Press
; to complete the operation.
; to complete the operation.
3
•
•
•
•
•
•
•
•
4
5
6
•
Appendix
Information on the software license for this product
Software composition
The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by
third parties.
Software developed by SHARP and open source software
The copyrights for the software components and various relevant documents included with this product that were developed or written
by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also
makes use of freely distributed software and software components whose copyrights are held by third parties. These include software
components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other
license agreement.
Obtaining source code
Some of the open source software licensors require the distributor to provide the source code with the executable software components.
GPL and LGPL include similar requirements. For information on obtaining the source code for the open source software and for obtaining
the GPL, LGPL, and other license agreement information, visit the following website:
http://www.sharp-eu.com/gpl/
We are unable to answer any questions about the source code for the open source software. The source code for the software
components whose copyrights are held by SHARP is not distributed.
Acknowledgements
The following open source software components are included in this product:
• linux kernel • busy box • glibc • zlib • libpng • libjpeg • mtd-utils • u-Boot
Software copyrights
BSD License
This product includes software developed by the University of California, Berkeley and
its contributors.
libjpeg
This software is copyright © 1991-1998, Thomas G. Lane. Portions of this software are
based in part on the work of the Independent JPEG Group.
Portions copyright © 2004 Intel Corporation
Warning regarding basic use
Cautions regarding use in high and low temperature environments
When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the TV will recover when the temperature returns to normal.
Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this
may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: e 5 °C to e 35 °C.
•
•
Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a
connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire
hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a
certain frequency range (galvanic isolator, see EN 60728-11).
NOTE
For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to
television distribution systems.
•
Specifications
Item
LCD COLOUR TV
(40 o/81.28 cm),
LC-40LE820E, LC-
40LE810E
LCD COLOUR TV
(46 o/116.84 cm),
LC-46LE820E, LC-
46LE810E
LCD COLOUR TV
(52 o/132.08 cm), LC-
52LE820E
LCD panel
Advanced Super View
& BLACK TFT LCD (40
o/81.28 cm)
o/81.28 cm)
Advanced Super View
& BLACK TFT LCD (46
o/116.84 cm)
o/116.84 cm)
Advanced Super View
& BLACK TFT LCD (52
o/132.08 cm)
o/132.08 cm)
Resolution
1,920 x 1,080 x 4 pixels
Video colour system
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV function
TV-standard
Analogue
CCIR (B/G, I, D/K, L/L’)
Digital
DVB-T (2K/8K OFDM), DVB-C
Receiving
channel
VHF/UHF
IR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch, I21_I69 ch, IR A_IR J ch
CATV
Hyper-band, S1_S41 ch
TV-tuning system
Auto Preset 999 ch (non-Nordic [DTV]), Auto Preset 9999 ch (Nordic [DTV]),
Auto Preset 99 ch (ATV), Auto Label, Auto Sort
STEREO/BILINGUAL
NICAM/A2
Audio amplifier
10 W x 2/15 W x 1
Speaker
(234 mm x 22 mm) x 2/Ø 110 mm
Terminals
Antenna
UHF/VHF 75 q Din type (analogue & digital)
RS-232C
D-Sub 9 pin male connector
EXT 1
SCART (AV input, Y/C input, RGB input, TV output)
EXT 2
RCA pin (AV input/AUDIO L/R)
EXT 3
15 pin mini D-sub
HDMI 1 (EXT 4)
HDMI (ARC)
HDMI 2 (EXT 5)
HDMI
HDMI 3 (EXT 6)
HDMI
HDMI 4 (EXT 7)
HDMI
USB
USB
ETHERNET (10/100)
Home network connector (only the 820 model series)
HDMI 2/EXT 3 AUDIO (L/R)
Ø 3.5 mm jack*
1
DIGITAL AUDIO OUTPUT
Optical S/PDIF digital audio output
C. I. (Common Interface)
EN50221, R206001, CI Plus specification
OUTPUT/Headphones
RCA pin (AUDIO R/L)/Ø 3.5 mm jack (audio output)
OSD language
Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek,
Hungarian, Italian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian,
Slovak, Slovene, Spanish, Swedish, Turkish, Ukrainian
Power requirement
AC 220_240 V, 50 Hz
Power consumption (method
IEC62087)
820 models
127 W (0.2 W standby*
2
)
147 W (0.2 W standby*
2
)
159 W (0.2 W standby*
2
)
810 models
127 W (0.2 W standby*
2
)
147 W (0.2 W standby*
2
)
Weight
820 models
19.5 kg (without stand),
23.5 kg (with stand)
24.5 kg (without stand),
30.0 kg (with stand)
30.0 kg (without stand),
35.0 kg (with stand)
810 models
16.0 kg (without stand),
19.5 kg (with stand)
20.5 kg (without stand),
26.0 kg (with stand)
Operating temperature
0 °C to e 40 °C
The HDMI 2 and EXT 3 terminals can both use the same audio input terminal.
Standby power consumption applies when the TV is set to not receive EPG data.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
I
J
J
•
Appendix
Click on the first or last page to see other LC-46LE820E (serv.man16) service manuals if exist.