Sharp LC-46LE820E (serv.man16) User Manual / Operation Manual ▷ View online
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to “Menu” > “Setup” > “Picture” >
“Advanced”.
C.M.S.-hue
This function adjusts the hue of a selected colour using a
six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
C.M.S.-value
This function adjusts the brightness of a selected colour
using a six-colour adjustment system.
Colour temp.
Adjusts the colour temperature to give the best white
image.
Item
High
White with bluish tone.
Mid-High
Intermediate tone between “High” and
“Middle”.
Middle
Natural tone.
Mid-Low
Intermediate tone between “Middle”
and “Low”.
Low
White with reddish tone.
R/G/B Gain (LO),
R/G/B Gain (HI)
Adjusts the white balance by changing
the value of each item.
Fine motion advanced
“Fine motion advanced” technology provides superior
solutions for digital display picture quality removing
motion blur (“High”, “Low”, “Off”).
NOTE
This effect is greater on fast moving images.
“Fine motion advanced” will have no effect in the following
cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
If images appear blurred, set the “Fine motion advanced” to
“Off”.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e 2 to a
minimum of f 2.
•
•
•
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality
(“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).
Active contrast
Automatically adjusts the contrast of an image according
to the scene.
DNR
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
This function may not be available depending on the input
signal type.
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
Item
Standard
Normal adjustment.
Fast
Sets the optimum image quality for fast-
moving images.
Slow
Sets the optimum image quality for
slow-moving images.
NOTE
“3D-Y/C” may not operate depending on the input signal type
or when the input signal is noisy.
“3D-Y/C” has even more effect on composite video signals
(CVBS).
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of e 16 and a minimum of f 16.
NOTE
This function is available only when the “OPC” setting is set to
“On” or “On:Display”.
The maximum setting cannot be set to a smaller number than
the minimum setting.
The minimum setting cannot be set to a bigger number than
the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
•
•
•
•
•
•
•
•
Basic adjustment
Audio settings
Go to “Menu” > “Setup” > “Audio”.
Setup
Bass
Auto volume
Audio
Treble
[Off]
STANDARD
CH list
:Back
:Enter
Menu
Balance
L30
R30
Audio
Auto volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. This function reduces this problem
by equalizing levels.
Item
High
Strongly reduces the volume gaps
among different sound sources.
Middle
Low
Slightly reduces the volume gaps among
different sound sources.
Off
Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference with
the following settings.
Selectable
items
c (Cursor)
d (Cursor)
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio from
the left speaker
Audio
Surround
This function allows you to enjoy realistic live sound.
Audio
Bass enhancer
This function allows you to enjoy bass-enhanced sound.
Audio
Clear voice
This function emphasises speech against background
noise for greater clarity.
Setting audio input
Option
Audio select
When using the EXT 3 terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “PC input” > “Audio
select”.
When selecting “HDMI 2” from the “INPUT” menu
Item
HDMI (Digital)
When connecting devices (including
a PC) with HDMI cable to the HDMI 2
terminal.
HDMI+Analog
When connecting devices (including a
PC) with DVI/HDMI cable to the HDMI
2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
You must set this to “HDMI+Analog” when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If “HDMI (Digital)” is set, there will be no sound output.
When selecting “EXT 3” from the “INPUT” menu
Item
Video
When connecting devices with AV cable
to the EXT 3 terminal, display images
without audio.
Video+audio
When connecting a PC to the EXT 3
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
You must also set “COMPONENT” from the “Input select”
menu when selecting “EXT 3” from the “INPUT” menu (Pages
15 and 40).
•
•
Basic adjustment
Power save settings
Go to “Menu” > “Setup” > “ECO”.
Setup
No signal off
ECO picture control
ECO
Energy save
CH list
:Back
:Enter
Menu
No operation off
[Disable]
[Disable]
[Off]
[On]
ECO
ECO picture control
This function automatically detects the image source and
decreases the power consumption while keeping the
brightness of the image unchanged.
NOTE
This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)” or “AUTO”.
This function does not work when “Energy save” is set to
“Standard” or “Advanced”.
ECO
Energy save
This function enables you to reduce the backlight
brightness in order to decrease the power consumption
and increase the backlight life span as shown in the
following table.
Item
Standard
Reduces the backlight brightness.
Advanced
Reduces the backlight brightness more
than “Standard”.
Off
The backlight brightness is the same
value of your settings in the selected
“AV mode”.
NOTE
This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”.
•
•
•
“Energy save” status icons
Icon
Description
“Energy save” is set to “Standard”.
“Energy save” is set to “Advanced”.
When “Energy save” is set to “Standard” or “Advanced”,
“Energy save” status icons appear in the “Picture” menu
and channel information windows.
ECO
No signal off
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
NOTE
Even if a TV programme finishes, this function may not operate
because of interference from other TV stations or other signals.
ECO
No operation off
The TV will automatically enter standby mode if no
operations are performed in three hours if “Enable” is
selected.
NOTE
Five minutes before the TV enters standby mode, the remaining
time displays every minute.
ECO
Sleep timer
Allows you to set a time when the TV automatically enters
standby mode. You can set the time span for entering
standby mode after selecting “Change”.
NOTE
Select “Off” to cancel the sleep timer.
When the time has been set, countdown automatically starts.
Five minutes before the preset of time expires, the remaining
time displays each minute.
ECO
Audio only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Item
On
Audio is output without a screen image.
Off
Both screen images and audio are
output.
E
•
•
•
•
•
Basic adjustment
0
Channel settings
Setup
Quick start
Auto installation
View setting
Channel settings
CH list
:Back
:Enter
Menu
Individual setting
View setting
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
Go to “Menu” > “Setup” > “View setting” >
“Auto installation”.
Press c/d to select “Yes”, and then press
Press c/d to select “Yes”, and then press
;.
Press a/b/c/d to select the desired
Press a/b/c/d to select the desired
language, and then press ;.
NOTE
PIN input is required when executing “Auto installation”. The
default PIN is “1234”. To change the PIN setting, refer to
Password/Lock settings (Page 33). To clear the PIN setting
(PIN input will no longer be needed), refer to
CLEARING THE
PIN (Page 50).
You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
The current country setting is displayed on the screen.
Press a/b to select the broadcast standard
you want to search, and then press ;.
1
2
3
•
•
•
4
Digital search
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to
Digital
broadcast setting on pages 11_12.
Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to
Analogue
broadcast setting on page 12.
View setting
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
Go to “Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup”.
Press a/b to select the broadcast standard
Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
PIN input is required when executing “Programme setup”.
The default PIN is “1234”. To change the PIN setting, refer to
Password/Lock settings (Page 33). To clear the PIN setting
(PIN input will no longer be needed), refer to
CLEARING THE
PIN (Page 50).
Digital setting
Terrestrial
You can reconfigure the following settings when you
select “Terrestrial” in the initial auto installation or the
“Auto installation” menu.
Additional search
Use this menu to add new services automatically after
“Digital search” in the “Auto installation” menu has been
completed.
Manual search
Add new services within a specified frequency band.
Enter the frequency using
0_9 numeric buttons.
You can perform “Manual search” with a service number only
when the five Nordic countries have been selected in the
country setting.
E
E
1
2
•
E
E
•
•
Basic adjustment
Click on the first or last page to see other LC-46LE820E (serv.man16) service manuals if exist.