Sharp LC-46LE820E (serv.man16) User Manual / Operation Manual ▷ View online
Basic adjustment
Manual adjust
Configure various settings for each service using the
colour (
R/G/B) buttons.
Service
no.
Lock
Service
name
Lock
CH skip
Old LCN
CH skip
Sort
Delete
Press a/b to select the desired service.
Press the colour button on the remote control
Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
The 4 mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.
Buttons for “Manual adjust” operation
Lock
Press R button.
When the service is locked, you must enter your
PIN whenever you tune to the service.
CH skip
Press G button.
Services with a 4 mark are passed over when
pressing :r/s on the TV or remote control unit.
Delete
Press Y button.
The selected service is deleted. If you want to
watch the service you deleted once again, perform
“Auto installation”, “Additional search”, or “Manual
search”.
Sort
Press B button.
The item position of services can be sorted.
Press a/b to select the service whose
item position you want to move, and then
press ;.
Press a/b to move it to the desired
position, and then press ;.
Repeat steps 1 and 2 until all desired
service items are sorted.
1
2
3
E
1
2
2
•
Cable
You can reconfigure the following settings when you
select “Cable” in the initial auto installation or the “Auto
installation” menu.
Additional search
Use this menu to add new services automatically after
“Digital search” in the “Auto installation” menu has been
completed. Follow steps 1 to 5 in Searching for
cable broadcasts on page 12.
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, the TV
starts searching.
Refer to the table about menu items in the right column
on page 12.
Frequency
Symbol rate
QAM modulation
Search start
MHz
Manual adjust
This function is the same as in “Terrestrial”. Refer to
“Manual adjust” in “Terrestrial”.
H
You can only reconfigure the “Manual adjust” settings.
You can only set the “Lock” setting in “Manual adjust”.
E
E
•
E
•
•
Analogue setting
You can reconfigure the analogue TV channels settings
automatically or manually.
Additional search
Use this menu to add new services automatically after
“Analogue search” in the “Auto installation” menu has
been completed.
Start searching channels after selecting the colour system and
sound system.
Manual adjust
Use this menu to set up analogue TV channels manually.
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
a/b/c/d to select the channel you want to
set and then press ;.
Fine
You can adjust the frequency to the desired position.
NOTE
Adjust while checking the background picture as a reference.
Instead of pressing c/d to adjust the frequency, you can set
by directly entering the frequency number of the channel with
0_9 numeric buttons.
EXAMPLE
179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
Colour sys.
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the “Auto
installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Press a/b/c/d to select each character of
the new name for the channel, and then press
;.
Repeat step 1 above until the name is fully
;.
Repeat step 1 above until the name is fully
spelt out.
NOTE
The name can be five characters or less.
If a channel name is less than five characters, select “END” to
set the channel name.
E
•
E
•
•
•
•
1
2
•
•
Skip
Channels with “Skip” set to “On” are passed over when
using :r/s even if selected while watching the image
from the TV.
Decoder
When connecting a decoder to the TV, you need to select
“EXT 1”.
NOTE
The factory preset value is “Off”.
Lock
You can block the viewing of any channel.
NOTE
See “PIN” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “PIN” temporarily until the power is turned off.
Sort
Channel positions can be sorted freely.
Press c/d to select “Yes”, and then press
;.
Press a/b/c/d to select the channel you
Press a/b/c/d to select the channel you
want to move, and then press ;.
Press a/b/c/d to move it to the desired
Press a/b/c/d to move it to the desired
position, and then press ;.
Repeat steps 2 and 3 until all desired channels
Repeat steps 2 and 3 until all desired channels
are sorted.
Erase programme
Channels can be erased individually.
Press c/d to select “Yes”, and then press
;.
Press a/b/c/d to select the channel you
Press a/b/c/d to select the channel you
want to erase, and then press ;.
A message window pops up.
Press c/d to select “Yes”, and then press
; to erase the selected channel. All the
subsequent channels move up.
Repeat steps 2 and 3 until all desired channels
Repeat steps 2 and 3 until all desired channels
are erased.
•
•
•
•
E
1
2
3
4
E
1
2
•
3
4
Basic adjustment
Password/Lock settings
View setting
PIN
Allows you to use a PIN to protect certain settings from
being accidentally changed.
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “PIN”.
NOTE
PIN input is required when executing “PIN”. The default PIN
is “1234”. To clear the PIN setting (PIN input will no longer be
needed), refer to
CLEARING THE PIN (Page 50).
When selecting “Yes”
Register a four-digit password number to use the “PIN”
function.
Press c/d to select “Yes”, and then press
;.
Enter the four-digit number as a PIN using
Enter the four-digit number as a PIN using
0_9 numeric buttons.
Enter the same four-digit number as in step 1
Enter the same four-digit number as in step 1
to confirm.
“The system PIN has been changed successfully”
displays.
Press ;.
NOTE
To view a locked channel, you must enter the PIN (see pages
31 and 32 for locking channels from viewing in DTV and ATV
mode). When you select a locked channel, a PIN prompt
message pops up. Press 6 to display the PIN input window.
When selecting “No”
Allows you to reset your PIN.
Press c/d to select “Yes”, and then press
;.
NOTE
As a precautionary measure, make a note of your PIN on
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
•
E
1
2
3
•
4
•
E
•
View setting
Parental rating
This function allows DTV services to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Parental rating”.
Repeat steps 1 to 4 in
Repeat steps 1 to 4 in
when selecting “Yes”
to the left.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings
used exclusively in France.
Refer to page 56 for details about ratings.
Option
Key lock
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
Go to “Menu” > “Setup” > “Option” > “Key
lock”.
Item
Off
Unlocks the buttons.
RC control lock
Locks all buttons on the remote control
unit.
Button control lock
Locks the buttons on the TV except the
power switch.
NOTE
You cannot set both “RC control lock” and “Button control lock”
at the same time.
Cancelling the lock
Press @ on the TV and set to “Off” to cancel the
“RC control lock”. Press @ on the remote control
unit and set to “Off” to cancel the “Button control lock”.
Refer to page 6 for menu operation using @- on the
front of the TV.
1
2
•
•
•
E
•
Basic adjustment
Basic adjustment
Language settings
View setting
Digital audio language
Set up to three preferred multi audio languages to display
if the audio languages are available.
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Digital audio language”.
Switching the multi audio languages
Each time you press 7 on the remote control unit, the
audio language switches.
View setting
Subtitle
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Subtitle”.
Selectable items
1st language
2nd language
For hearing impaired
E
E
E
E
E
Switching subtitle languages
Each time you press [ on the remote control unit, the
subtitle switches.
Off
1st language
2nd language
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over each
of the subtitle language settings (e.g., “1st language”,
“2nd language”, etc.).
EXAMPLE
1st language
(For hearing impaired)
1st language
NOTE
Subtitles will not be displayed when the programme does not
contain subtitle information.
E
E
E
•
View setting
Language
You can select an OSD language from among 23
languages. Refer to the
OSD language column in the
specification table for the selectable languages (Page 53).
Go to “Menu” > “Setup” > “View setting” >
“Language”.
Useful settings
View setting
Quick start
You can reduce the TV’s start-up time after turning on the
power with the remote control unit.
Go to “Menu” > “Setup” > “View setting” >
“Quick start”.
Item
On
The TV quickly starts up from standby.
30 W or more of power consumption is
required during standby.
Off
Power consumption is small during
standby.
Click on the first or last page to see other LC-46LE820E (serv.man16) service manuals if exist.