Sharp LC-46LE820E (serv.man16) User Manual / Operation Manual ▷ View online
Display settings
Channel display
You can display the channel information by pressing p
on the remote control unit.
DTV mode
ATV mode
Audio (ENG)
STEREO
Video
Subtitle
Off
>> New information
MONO
Auto
Subtitle
Four digit numbers (e.g., 0001) are displayed after selecting the
five Nordic countries in the country setting.
Time display in channel information
You can display the time information included in DTV and
teletext broadcasts.
NOTE
Skip step 1 if receiving DTV broadcasts.
Select a TV channel (the time information is
automatically captured).
Press p. The channel display will appear on
Press p. The channel display will appear on
the TV.
Press p again within the several seconds
Press p again within the several seconds
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
Even when you change the TV channel, you
Even when you change the TV channel, you
can display the time information with steps 2
and 3 above.
NOTE
If acquired successfully, the time information will appear in the
upper-right corner of the screen by pressing @.
*
E
•
1
2
3
4
•
Time and title display
View setting
Time display
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Time display”.
Time display
This function allows you to display the clock time in the
lower-right corner of the screen.
Item
On
Displays the clock time.
On (half-hourly)
Displays the clock time in 30-minute
increments.
Off
Hides the clock time.
Time format
You can select the time format (either “24HR” or “AM/
PM”) for the clock time.
Option
Game play time
This function allows you to display the elapsed time on
the screen when “AV mode” is set to “GAME”.
Go to “Menu” > “Setup” > “Option” > “Game
play time”.
Item
On
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off
Hides the time.
NOTE
This menu is not selectable if the input source is “TV” or “USB”.
Option
Programme title display
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Programme title display”.
NOTE
This function is available only when the DTV mode is selected.
•
•
Useful viewing functions
0
Setting when using external
devices
Input source settings
Option
Input select
For setting the signal type of external equipment.
Press b to select the input source for
setting the input signal (“EXT 1” or “EXT 3”)
from the “INPUT” menu, and then press ;.
Go to “Menu” > “Setup” > “Option” >
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Input select”.
Item
EXT 1
Y/C, CVBS, RGB
EXT 3
COMPONENT, RGB
NOTE
If no (colour) image displays, try changing to another
signal type.
Check the operation manual of the external equipment for the
signal type.
Option
Input label
You can label each input source with a custom
description.
Press b to select the desired input source
from the “INPUT” menu, and then press ;.
Go to “Menu” > “Setup” > “Option” >
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Input label”.
Press a/b/c/d to select each character of
Press a/b/c/d to select each character of
the new name for the input source, and then
press ;.
CLEAR
BACK
BACK
END
1
2
•
•
1
2
3
Repeat until the label is fully spelt out.
NOTE
The label can be six characters or less.
When you want to set an input source label of less than six
characters, select “END” to set the name.
TV
INPUT
Switchable
CH list
NOTE
You cannot change labels if the input source is “TV” or “USB”.
Skipping specified inputs
Option
Input skip
This setting allows you to skip the SCART, HDMI or RGB
input on the input source selection operation.
Go to “Menu” > “Setup” > “Option” > “Input
skip”.
Setup
Input skip
Terminal setting
[No]
[No]
[No]
[No]
[No]
[Yes]
NOTE
When you select “ATV” or “DTV”, the skip function works only
when using the INPUT b button on the front of the TV.
4
•
•
•
•
Other useful features
Additional features
Option
Colour system
You can change the colour system to one that is
compatible with the image on the screen.
Go to “Menu” > “Setup” > “Option” > “Colour
system”.
NOTE
The factory preset value is “Auto”.
If “Auto” is selected, the colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g., “PAL”, “SECAM”).
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone/Audio out
select”.
Item
Headphone
Output audio through headphones.
Audio out
Output audio through an A/V receiver or
surround audio controller.
CAUTION
This terminal is also used for headhones. Reduce the volume
before using headphones. Overwhelming sound may damage
your hearing.
NOTE
If you select “Audio out” when a cable is inserted in the HDMI
2/EXT 3 AUDIO (L/R) terminal, the TV speakers are muted.
When you select “Audio out”, you can adjust the TV sound
volume with the Yl/k buttons on the TV or i+/-
buttons on the remote control unit.
•
•
•
•
•
Option
Channel selecting effect
This function shows a screen effect when choosing or
changing channels.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Channel selecting effect”.
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to “Menu” > “Setup” > “Option” >
“Illumination”.
Item
Off
The LED is not illuminated.
Standby
The LED is illuminated while the TV is in
standby mode.
Watch
The LED is illuminated while you watch
TV.
Always
The LED is illuminated all the time.
NOTE
The factory default for this item is “Watch”. Set to “Off” if you do
not want the LED to illuminate.
•
Other useful features
Connecting a USB device
Connect an USB device to the TV as shown below.
The TV automatically switches to the USB mode when a USB
device is inserted in the USB terminal (this does not work when
using the time shift function).
Depending on the USB device, the TV may not be able to
recognise the contained data.
Use only alphanumeric characters for naming files.
File names over 80 characters (may vary depending on the
character set) may not be displayed.
Do not disconnect a USB device or memory card from the TV
while transferring files, using the slide show function, when a
screen is switching to another or before you exit “USB” from
the “INPUT” menu.
Do not connect and disconnect a USB device from the TV
repeatedly.
CAUTION
Do not use a USB extension cable when connecting a USB
device to the USB terminal of the TV.
Using a USB extension cable may prevent the TV from
performing correctly.
Connecting a Home network
server
Connect a Home network server to the TV as shown
below. This function is available only for the 820 model
series.
Home network server
Router
LAN cable
Router
LAN cable
•
•
•
•
•
•
•
•
NOTE
You may need to setup the TV for a Home network server in
“Ethernet setup” from the “View setting” menu.
The TV automatically switches to Home network mode when a
Home network server is connected (this does not work when
using the time shift function).
Depending on the Home network server, the TV may not be
able to recognise the contained data.
Use only alphanumeric characters for naming files.
File names over 80 characters (may vary depending on the
character set) may not be displayed.
Do not disconnect a Home network server from the TV while
transferring files, using the slide show function, when a screen
is switching to another or before you exit “Home network” from
the “INPUT” menu.
Do not connect and disconnect a Home network server from
the TV repeatedly.
USB media/Home network
Select “USB” or “Home network” from the “INPUT” menu
to enter this mode or the TV automatically switches to
the USB/Home network mode when a USB device/a
Home network server is connected to the TV.
USB media
In this mode, you can enjoy viewing photos, listening to
music and watching videos from external USB devices.
Home network
In this mode, you can enjoy viewing photos and listening
to music from external Home network server.
NOTE
You cannot enter this mode when there is no USB device or
Home network server connected to the TV.
“Wide mode” is fixed during “Photo mode”. During “Video
mode”, you can select “Auto” or “Original”.
Selecting modes and drives/servers
Photo mode
Video mode
Music mode
Press
B to select the drive/server where you
want to find your files, and then press ;.
Press c/d to select among “Photo mode”,
Press c/d to select among “Photo mode”,
“Music mode” or “Video mode”, and then
press ;.
NOTE
“Video mode” is only available for USB mode.
You do not need to select the drive/server in step 1 when there
is only one drive in the connected USB device or there is only
one Home network server connected to the TV.
16 is the maximum number of drives/servers that can be
displayed.
•
•
•
•
•
•
•
•
•
1
2
•
•
•
Other useful features
Click on the first or last page to see other LC-46LE820E (serv.man16) service manuals if exist.