DOWNLOAD Sharp LC-46LE600E (serv.man13) Service Manual ↓ Size: 5.33 MB | Pages: 36 in PDF or view online for FREE

Available only when you set “Audio Description” in the 
“Type” menu above.

When set to “On”, audio for the visually 
impaired is output from the TV speakers.

When set to “On”, audio for the visually 
impaired is output from the headphone 
terminal.

Adjust the volume of the speakers or 
headphones.

When using the EXT 4 terminal or HDMI 2 terminal, you 
must select which terminal uses the AUDIO (R/L) jack for 
analogue audio input.

When connecting devices (including a 
PC) with DVI/HDMI cable to the HDMI 
2 terminal and inputting analogue audio 
signals from the AUDIO (R/L) jack*.

When connecting a PC to the EXT 4 
terminal, and inputting analogue audio 
signals from the AUDIO (R/L) jack.

HDMI signals have priority when the signal includes audio.

You must set this to “EXT 4 (RGB)” when connecting devices 
(including a PC) with an HDMI-certified cable to the HDMI 2 
terminal. If “HDMI 2” is set, there will be no sound output.

Different sound sources sometimes do not have the 
same volume level, such as a programme and its 
commercial breaks. The Automatic Volume Control (Auto 
Volume) reduces this problem by equalizing levels.

*

•

When listening to music from a music programme, you 
can set the TV off and enjoy audio only.

Both screen images and audio are 
output.

Audio is output without a screen image.

Set to “On” to enable interactive operation of compatible 
HDMI devices (DVD player/recorders, Blu-ray player/
recorders).

When the TV is in standby mode, it will automatically turn on 
and play back the image from the HDMI source.

AQUOS LINK allows you to operate the HDMI-connected 
device with a single remote control unit.

PLAY I

Starts playback.

FWD J

Scans forward.

REV G

Scans backward.

STOP H

Stops playback.

REC E

Records the programme being watched via 
the recorder’s tuner.

REC STOP H

Stops recording.

B

Turns the HDMI-connected device on/off.

Open the remote control unit’s flip cover when using the 
butttons above.

•

LC-LE600E_GB.indd   19

LC-LE600E_GB.indd   19

2009/07/14   14:38:58

2009/07/14   14:38:58

ECO

Energy Save

[Standard]

[On]

No Signal Off

ECO picture control

[Disable]

No Operation Off

[Disable]

This function automatically detects the image source and 
decreases the power consumption while keeping the 
brightness of the image unchanged.

This function does not work when “AV MODE” is set to 
“DYNAMIC (Fixed)”.
This function does not work when “Energy Save” is set to 
“Standard” or “Advanced”.

This function enables you to automatically reduce the 
backlight brightness in order to decrease the power 
consumption and increase the backlight life span.

The backlight brightness is the same 
value of your settings in the selected 
“AV MODE”.

Reduces the backlight brightness.

Reduces the backlight brightness more 
than “Standard”.

This function does not work when “AV MODE” is set to 
“DYNAMIC (Fixed)”.

“Energy Save” is set to “Standard”.

“Energy Save” is set to “Advanced”.

•

•

•

E

When set to “Enable”, the TV will automatically enter 
standby mode if there is no signal input for 15 minutes.

The TV will automatically enter standby mode if no 
operations are performed during the time span you set 
(“30 min.” or “3 hr.”).

The TV automatically detects and stores all available 
channels in your area. This function also allows you to 
perform the channel setting for digital and analogue 
individually and reconfigure the settings after the initial 
auto installation has been completed.

After selecting “Yes” on the screen, you can 
set language and channel search the same as 
in the initial auto installation.

PIN input is required when executing “Auto Installation”. The 
default PIN is “1234”. To change the PIN setting, refer to 
Password/Parental lock settings

 (Page 22). To clear the PIN 

setting (PIN input will no longer be needed), refer to CLEARING 
THE PIN

 (Page 24).

You cannot set the Home/Store setting and the country 
setting in “Auto Installation” in the “Setup” menu. If you want 
to reconfigure those settings, automatically execute initial auto 
installation after executing “Reset” from the “Setup” menu.

You can reconfigure the DTV/ATV channel settings 
automatically or manually.

PIN input is required when executing “Programme Setup”. 
The default PIN is “1234”. To change the PIN setting, refer to 
Password/Parental lock settings

 (Page 22). To clear the PIN 

setting (PIN input will no longer be needed), refer to CLEARING 
THE PIN

 (Page 24).

•

•

•

LC-LE600E_GB.indd   20

LC-LE600E_GB.indd   20

2009/07/14   14:38:59

2009/07/14   14:38:59

Use this menu to add new channels automatically after 
auto installation has been completed.

Add new services within a specified channel bandwidth.

You can search the channel bandwidth by pressing 

; after 

setting the value for both “From Channel” and “To Channel” 
using 

c/d.

You can perform “Manual Search” with a service number only 
when the four Nordic countries (Sweden, Norway, Finland or 
Denmark) have been selected in the country setting (Page 9). 
When another country has been selected, “Manual Search” is 
not shown on the menu screen.

This menu allows you to reconfigure some settings for 
the channel currently selected.

When a TV channel sends its Network Name, the “Auto 
Installation” detects the information and assigns a 
name to it. However, you can change channel names 
individually.

Press 

a/b/c/d to select each character of 

the new name for the channel, and then press 
;.
Repeat step 1 above until the name is fully 
spelt out.

The name can be six characters or less.
If a channel name is less than six characters, select “END” to 
set the channel name.

You can adjust the frequency to the desired position (only 
for analogue channels).

Adjust while checking the background picture as a reference.
You can set the frequency by pressing 

c/d. Each time you 

press 

c or d, the value is changed in increments of 0.05 MHz.

Select the optimum colour system to receive (“Auto”, 
“PAL”, “SECAM”, “NTSC”) (only for analogue channels).

Select the optimum sound systems (Broadcasting 
systems) to receive (“B/G”, “A2 B/G”, “D/K”, “A2 D/K”, 
“A2 D/K1”, “A2 D/K2”, “I”, “L”, “L’”) (only for analogue 
channels).

•

•

•
•

•
•

Channels with a 

✔ mark are passed over when pressing 

:r/s on the TV or remote control unit.

Press 

a/b to select the desired channel.

Press 

; to set a 

✔ mark at the channel that 

you want to skip.

The item position of channels can be sorted.

Press 

a/b to select the channel whose item 

position you want to move, and then press 
;.

Channel Number

Channel Name

Channel Sort

Press 

a/b to move it to the desired position, 

and then press 

;.

Channel Number

Channel Name

Channel Sort

Repeat steps 1 and 2 until all desired channel 
items are sorted.

When connecting a decoder to the TV, you need to select 
channels that need to be decoded.

When the channel is locked, you must enter your PIN 
whenever you tune to the channel.

See “Child Lock” for setting a PIN.
When “Channel Lock” is set for a channel, “Child lock has been 
activated” displays, and the image and sound of the channel 
are blocked.
When pressing 6 while “Child lock has been activated” 
displays, the PIN input window will display. Inputting the correct 
PIN unlocks the “Child Lock” temporarily until the power is 
turned off.
In case you select “Italy” in the country setting (Page 9), the PIN 
input window displays every time you tune in to the channels 
with “Channel Lock” applied.

1
2

1

2

3

•
•

•

•

LC-LE600E_GB.indd   21

LC-LE600E_GB.indd   21

2009/07/14   14:39:00

2009/07/14   14:39:00

Allows you to use a PIN to protect certain settings from 
being accidentally changed.

PIN input is required when executing “Child Lock”. The default 
PIN is “1234”. To clear the PIN setting (PIN input will no longer 
be needed), refer to CLEARING THE PIN (Page 24).

Register a four-digit password number to use the “Child 
Lock” function.

Enter the four-digit number as a PIN using 
0_9

 numeric buttons.

Enter the same four-digit number as in step 1 
to confirm.

To view a locked channel, you must enter the PIN (See page 
21 for locking channels). When you select a locked channel, 
a PIN prompt message pops up. Press 6 to display the PIN 
input window.
As a precautionary measure, make a note of your PIN on 
the back of this operation manual, cut it out and keep it 
in a safe place that children cannot reach.

Allows you to reset your PIN.

This function allows DTV channels to be restricted. It 
prevents children from watching violent or sexual scenes 
that may be harmful.

“Universal viewing” and “Parental approval pref.” are ratings 
used exclusively in France.
Refer to page 32 for details about ratings.

You can select an OSD language from the “Setup” 
menu. Select from among 23 languages. Refer to the 
OSD language

 column in the specification table for the 

selectable languages (Page 29).

•

•

•

•

•

Set up to two preferred subtitle languages (including 
subtitles for the hearing impaired) to display if subtitles 
are available.

E
E
E

Each time you press [ on the remote control unit, the 
subtitle switches.

Subtitles for the hearing impaired have priority over each 
of the subtitle language settings (e.g., “1st Language”, 
“2nd Language”, etc.).

Subtitles will not be displayed when the programme does not 
contain subtitle information.

Select the preferred language from “1st Digital Audio 
Language” (“2nd Digital Audio Language”) to set up 
the first (second) priority language for digital audio. 
This setting is effective only when more than one audio 
language is available.

Each time you press 2 on the remote control unit, the 
audio language switches.

You can set up to two preferred multi audio languages if the 
audio languages are available.

E

E

•

E

•

LC-LE600E_GB.indd   22

LC-LE600E_GB.indd   22

2009/07/14   14:39:01

2009/07/14   14:39:01