DOWNLOAD Sharp LC-46LE600E (serv.man13) Service Manual ↓ Size: 5.33 MB | Pages: 36 in PDF or view online for FREE

Connect an amplifier with external speakers as shown below.

DIGITAL AUDIO IN

Optical audio cable



E

AUX1 IN

L

R

AUX OUT

L

R

Audio cable



E

Digital audio output setting
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio 
output format compatible with the programme you are watching or the device connected.

Go to “MENU” > “Option” > “Digital Audio Output” > select “PCM” or “Dolby Digital”.

When set to “Dolby Digital”, Dolby Digital is output when the Dolby Digital or Dolby Digital Plus audio formats are received. When 
set to “PCM”, PCM is output no matter what audio formats are received.

E

•

Carefully insert the CI Module in 
the CI slot with the contact side 
forward.
The logo on the CI Module must 
be facing outward from the rear 
of the TV.

Go to “MENU” > “Digital Setup” > “CI Menu”.

The content of this menu depends on the provider of the CI Module.

General information on CI Module displays.

Adjustment parameters of each CA Card displays.

You can input numerical values such as passwords here.

Make sure that the CI Module is properly inserted.

•

•

LC-LE600E_GB.indd   15

LC-LE600E_GB.indd   15

2009/07/14   14:38:55

2009/07/14   14:38:55

You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.
The “MENU” enables various settings and adjustments.

Press @ and the “MENU” screen 
displays.

Picture

OPC

[Off]

Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset

DYNAMIC

The operation will exit the “MENU” 
screen if you press 

> before it is 

completed.

Press 

a/b/c/d to select/adjust 

the desired menu, and adjust the item 
to the desired level, and then press 
;. Press 6 to return to the previous 
“MENU” page.

Energy Save

ECO

No Signal Off

No Operation Off

[Off]

[Disable]

[Disable]

ECO picture control

[On]

“MENU” options differ in the selected input modes, but the operating procedures are the same.
Items with 4 cannot be selected for various reasons.
The “MENU” screen will disappear if left unattended for several seconds.

This function is useful when there is no remote control unit within your reach.

Press @ and the “MENU” screen displays.

Press :r/s instead of 

a/b or i+/- instead of c/d to select the item.

Press b to complete the setting.

The Guide Display at the bottom of the screen shows operations with the 
OSD.

The bar above is an operational guide for the remote control unit. The bar will 
change in accordance with each menu setting screen.

•

Select

Enter

Back

End

•
•

•
•
•

LC-LE600E_GB.indd   16

LC-LE600E_GB.indd   16

2009/07/14   14:38:55

2009/07/14   14:38:55

Picture

OPC

[Off]

Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset

DYNAMIC

Automatically adjusts the brightness of the screen.

Displays the OPC effect on the screen 
while adjusting the brightness of the 
screen.

Automatically adjusts.

The brightness is fixed at the value set 
in “Backlight”.

When set to “On”, the TV senses the surrounding light and 
automatically adjusts the backlight brightness. Make sure no 
object obstructs the OPC sensor, which could affect its ability 
to sense surrounding light.

Adjusts the picture to your preference with the following 
picture settings.

c (Cursor)

d (Cursor)

The screen dims

The screen brightens

For less contrast

For more contrast

For less brightness

For more brightness

For less colour 
intensity

For more colour 
intensity

Skin tones become 
purplish

Skin tones become 
greenish

For less sharpness

For more sharpness

•

This TV provides various advanced functions for 
optimising the picture quality.

Picture

Colour Temp.

High

[On]
[On]

[Middle]

Film Mode
Active Contrast
DNR
OPC Max.
OPC Min.

DYNAMIC

Adjusts the colour temperature to give the best white 
image.

White with bluish tone.

Intermediate tone between “High” and 
“Middle”.

Natural tone.

Intermediate tone between “Middle” 
and “Low”.

White with reddish tone.

Automatically detects a film-based source (originally 
encoded at 24 or 25 frames per second, depending on 
the vertical frequency), analyses it and then recreates 
each still film frame for high-definition picture quality.

Automatically adjusts the contrast of an image according 
to the scene.

“DNR” produces a clearer image (“Off”, “High”, “Middle”, 
“Low”).

This function may not be available depending on the input 
signal type.

•

LC-LE600E_GB.indd   17

LC-LE600E_GB.indd   17

2009/07/14   14:38:56

2009/07/14   14:38:56

The brightness level range of the OPC sensor’s automatic 
adjustments can be set according to your preferences. 
The adjustment range of the OPC sensor can be set to a 
maximum of 

e 16 and a minimum of f 16.

This function is available only when the “OPC” setting is set to 
“On” or “On:Display”.
The maximum setting cannot be set to a smaller number than 
the minimum setting.
The minimum setting cannot be set to a bigger number than 
the maximum setting.
The maximum and minimum settings cannot be set to the 
same number.
Depending on the brightness of the surrounding light, the OPC 
sensor might not operate if the adjustment range is small.

“AV MODE” gives you several viewing options to choose 
from to best match the system environment, which 
can vary due to factors like room-brightness, type of 
programme watched or the type of image input from 
external equipment.

Press 

#.

Each time you press 

#, the mode 

changes.

You can also switch the mode on the “Picture” and 
“Audio” menu screen by pressing 

#.

For a highly defined image in a normally 
bright room.

For viewing a movie in a darkened room.

For playing of video games.

For PC.

Allows you to customise settings as 
desired. You can set the mode for each 
input source.

For a clear-cut image emphasising 
high contrast for sports viewing (The 
“Picture” and “Audio” settings cannot 
be adjusted).

For a clear-cut image emphasising high 
contrast for sports viewing.

The item marked with * is available only when selecting “HDMI 
1”, “HDMI 2”, “HDMI 3” or “EXT 4” from the “INPUT SOURCE” 
menu.

•

•

•

•

•

•

•

Audio

Treble

[Off]

[Normal]

Bass
Balance
Surround
Type
Audio Description
Reset

DYNAMIC

L

R

You can adjust the sound quality to your preference with 
the following settings.

c (Cursor)

d (Cursor)

For weaker treble

For stronger treble

For weaker bass

For stronger bass

Decrease audio from 
the right speaker

Decrease audio from 
the left speaker

This function allows you to enjoy realistic live sound.

Audio stream is output normally.

Selecting this item enables you to adjust 
the settings for the visually impaired 
(see below).

Audio for the hearing impaired is output 
on the TV speakers by default when the 
programme contains audio information.

LC-LE600E_GB.indd   18

LC-LE600E_GB.indd   18

2009/07/14   14:38:57

2009/07/14   14:38:57