DOWNLOAD Sharp LC-46LE600E (serv.man13) Service Manual ↓ Size: 5.33 MB | Pages: 36 in PDF or view online for FREE

EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO, view 
detailed information about them, tune to an event currently on-air.

The illustrations on this page are explained 
using three digit channels.

Press EPG.

E

Press 

a/b to select the channel you want to search, and then press d to move the cursor to the 

programme table.

If 

a or b are displayed on the left of the channels, continue to press a/b to display next or previous screen.

Press 

a/b to select the desired programme, and then press ; to display the programme 

information.

E

1
1

•

Press R to move to the programme table for 
the previous day.

Press G to move to the programme table for 
the next day.

Press 

a/b to select the programme you want 

to check.

Press Y to display the programme information.

Press Y or 6 to go back to the EPG screen.

2

3

4
1

Press B.

Press 

d to select the desired filter category.

Each time you press 

d, the filter category switches (e.g., 

“Movie”, “News”, etc.).

Press 

; or B to display the programme table 

for the selected category.

Press B or 6 to go back to the EPG screen.

5
1
2

•

LC-LE600E_GB.indd   11

LC-LE600E_GB.indd   11

2009/07/14   14:38:53

2009/07/14   14:38:53

Teletext broadcasts pages of information and 
entertainment to specially equipped TV. Your TV receives 
teletext signals broadcast by a TV network, and decodes 
them into graphical format for viewing. News, weather 
and sports information, stock exchange prices and 
programme previews are among the many services 
available.

Select a TV channel or external source 
providing a teletext programme.

Press m to display the Teletext.

Many stations use the TOP operating system, while 
some use FLOF (e.g., CNN). Your TV supports both 
these systems. The pages are divided into topic groups 
and topics. After switching on the teletext, up to 1,000 
pages are stored for fast access.
If you select a programme with no teletext signal, “No 
Teletext available” displays.
The same message displays during other modes if no 
teletext signal is available.

Each time you press m, the screen switches as shown 
above.
Press m again to display the teletext on the right screen 
and the normal image on the left screen.

If teletext information is not displayed correctly, select the 
language type from among nine kinds of language tables; 
“West Europe”, “East Europe”, “Russia”, “Russia-2”, 
“Greek”, “Turkey”, “Arab/Hbrw”, “Farsian”, or “Arab”.

Go to “MENU” > “Digital Setup” > “Teletext 
Language” > “Decode Page Lang.”.

Press 

c/d to select a receivable teletext 

broadcasting language in your area, and then 
press 

;.

Teletext can be displayed only when it is sent by a network. Not 
used to convert between languages.

•

•

•

•

•

•

:r/s

Increase or decrease the page number.

Select a group or block of pages displayed 
in the coloured brackets at the bottom of 
the screen by pressing the corresponding 
Colour (R/G/Y/B)

 on the remote control 

unit.

Numeric 
buttons 0_9

Directly select any page from 100 to 899 
by using the 0_9 numeric buttons.

v (Top/
Bottom/Full)

Switch the teletext image to Top, Bottom 
or Full.

k (Reveal 
hidden Teletext)

Reveal or hide hidden information such as 
an answer to a quiz.

3 (Freeze/
Hold)

Stop updating teletext pages automatically 
or release the hold mode.

[ (Subtitle for 
Teletext)

Display the subtitle or exit the subtitle 
screen.

Subtitles will not be displayed when 
the service does not contain subtitle 
information.

•

1 (Subpage)

Reveal or hide subpages.

Move to the previous subpage (R).
Move to the following subpage (G).
These two buttons are shown on the 
screen by the symbols “

e” and “f”.

•
•
•

Some services bring you programmes with the MHEG 
application encoded, letting you experience DTV 
interactively. When provided, the MHEG-5 application will 
start when you press m.

LC-LE600E_GB.indd   12

LC-LE600E_GB.indd   12

2009/07/14   14:38:53

2009/07/14   14:38:53

Be sure to turn off the TV and any devices before making any connections.
Firmly connect a cable to a terminal or terminals.
Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible 
audiovisual quality to maximise the potential of the TV and the connected device.
Refer to page 25 for connecting a PC to the TV.

The cables illustrated in pages 13_15 are commercially available items.

DVD player/recorder
Blu-ray player/recorder
Game console

E
E
E

The HDMI connections permit digital video and 
audio transmission via a connection cable from a 
player/recorder. The digital picture and sound data are 
transmitted without data compression and therefore lose 
none of their quality. Analogue/digital conversion is no 
longer necessary in the connected devices, which also 
would result in quality losses.

HDMI-certified cable

ø 3.5 mm stereo minijack cable

DVI/HDMI cable







One touch play
When images are played back from the connected HDMI 
device, the TV will automatically switch to the appropriate 
input source.

Standby
When the TV enters standby mode, the connected HDMI 
device enters standby mode as well.

The availability of the AQUOS LINK function depends on the 
HDMI device used. Depending on the manufacturer and type of 
equipment used, it is possible that the described functions may 
be completely or partially unusable.

Using a DVI/HDMI cable, the digital video signals of 
a DVD can also be played via the compatible HDMI 
connection. The sound must be fed in additionally.

When connecting a DVI/HDMI cable to the HDMI terminal, the 
image may not come in clearly.

You must set the audio signal input source 
depending on the type of HDMI cable connected 
(Refer to page 19 for details).

Go to “MENU” > “Option” > “PC Audio 
Select” > select “EXT 4 (RGB)”.

Go to “MENU” > “Option” > “PC Audio 
Select” > select “HDMI 2”.

E

Video noise may occur depending on the type of HDMI cable 
used. Make sure to use a certified HDMI cable.
When playing the HDMI image, the best possible format for the 
picture will be detected and set automatically.

576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 27 for PC signal compatibility.

•

•

•

•

E

•
•
•

•

•

LC-LE600E_GB.indd   13

LC-LE600E_GB.indd   13

2009/07/14   14:38:54

2009/07/14   14:38:54

Y

P

B

(

C

B)

P

R

(

C

R)

VCR
DVD player/recorder

E
E

You will enjoy accurate colour reproduction and high 
quality images through the EXT 3 terminal when 
connecting a DVD player/recorder or other device.

Y

P

B

(C

B

)

L

R

P

R

(C

R

)

COMPONENT

AUDIO

Audio cable



Component cable



VCR
DVD player/recorder
Game console
Camcorder

E
E
E
E

You can use the EXT 8 terminal when connecting to a 
game console, camcorder, a DVD player/recorder or 
other device.

AV cable



Decoder

E

SCART cable



VCR
DVD player/recorder

E
E

SCART cable



Do not connect a decoder to the EXT 2 terminal.

E

E

•

LC-LE600E_GB.indd   14

LC-LE600E_GB.indd   14

2009/07/14   14:38:54

2009/07/14   14:38:54