DOWNLOAD Sharp LC-37GA4E (serv.man6) Service Manual ↓ Size: 3.56 MB | Pages: 62 in PDF or view online for FREE

When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.

Press  a/b to select “No Signal Off”, and
then press OK.

Press  c/d to select “Enable”, and then
press OK.

• Five minutes before the power shuts down,

remaining time displays every minute.

• “Disable” is factory preset value.
• When a TV programme finishes, this function may not

operate.

Press c/d to select “Power Control”.

Press MENU and the MENU screen displays.

When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.

Press a/b to select “No Operation Off”, and
then press OK.

Press  c/d to select “Enable”, and then
press OK.

•

Five minutes before the power shuts down,
remaining time displays every minute.

• “Disable” is factory preset value.

Press c/d to select “Power Control”.

Press MENU and the MENU screen displays.

Power control setting allows you to save energy.

Power control setting allows you to save energy.

When set, the power will automatically shut down.

Press a/b to select “Power Management”,
and then press OK.

Press a/b to select “Mode1” or “Mode2”,
and then press OK.

Press c/d to select “Power Control”.

Press MENU and the MENU screen displays.

• No power management
• Factory preset value.

• If no signal inputs for 8 minutes, the power

shuts down.

• Even if you start using the PC and the signal

inputs again, the TV stays off.

• The TV turns on again by pressing a on

the Display or B on the remote control unit.
(See page 15.)

• If no signal inputs for 8 seconds, the power

shuts down.

• When you start using the PC and the signal

inputs again, the TV turns on.

• The TV turns on again by pressing a on

the Display or B on the remote control unit.
(See page 15.)

LC-37GA4E(E)-f

04.6.18, 10:27 AM

31

• To protect all equipment, always turn off the TV before

connecting to a decoder, VCR, DVD player, PC, game
console, camcorder or other external equipment.

• See pages 33 to 36 for external equipment connection.
• Please refer to the relevant operation manual (DVD player,

PC, etc.) carefully before making connections.

• Each time b is pressed, the input source toggles.
• If the image does not come in clearly, you may need to

change the input signal type setting on the “Input Select”
menu.

• Refer to your external equipment operation manual for

the signal type.

Explanation here is for the setting when connecting
DVD to INPUT3 terminal.

To watch a DVD image, select “INPUT3” from
“INPUT SOURCE” menu using b on the
remote control unit or INPUT  on the Display.

Select the desired signal type on “Input
Select” in the “Option” menu. (See page 39.)

The setting is stored and can be selected on the
“INPUT SOURCE” menu.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT5

INPUT4

MENU    

[Option ... Input Select]

COMPONENT

Y/C

CVBS

RGB

You can connect many types of external equipment to your TV, like a decoder, VCR, DVD player, PC, game
console and camcorder. To view external source images, select the input source from b on the remote
control unit or INPUT on the Display.

LC-37GA4E(E)-g

04.6.18, 10:27 AM

32

You can use the INPUT 1 terminal when connecting a decoder and other audiovisual equipment.

• In cases when the decoder needs to receive signal from the TV, make sure to set “Decoder” to “INPUT1” in the Programme

Setup “Manual Adjust” menu. (See page 24.)

SCART cable (commercially available)

You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced “AV Link” systems (see page 34), you can connect the VCR to the
INPUT 2 terminal of the TV using the fully-wired SCART cable.

• TV-VCR advanced “AV Link” systems may not be compatible with some external sources.
• It is recommended to connect to the INPUT 2 terminal when using a decoder for ground wave signal input with a VCR. If

INPUT 2 signals preset in auto installation or programme setup, make sure to set “Decoder” to “INPUT2” in the Programme
Setup “Manual Adjust” menu. (See page 24.)

To watch an image from this input terminal, you
may select the input source (see page 39) and
the input signal type (see page 44).

To watch an image from this input terminal, you
may select the input source (see page 39) and
the input signal type (see page 44).

SCART cable
(commercially available)

LC-37GA4E(E)-g

04.6.18, 10:27 AM

33

SCART cable
(commercially
available)

This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual
equipment.

• Only works when the audiovisual equipment is connected to the INPUT 2 terminal on the TV with AV Link via a fully wired

SCART.

While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).

When the connected audiovisual equipment (e.g. VCR,
DVD) enters standby mode, so does the TV.

When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.

Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the INPUT 2
terminal.

• Refer to operation manuals of each external equipment

for the details.

LC-37GA4E(E)-g

04.6.18, 10:27 AM

34