Sharp LC-37GA4E (serv.man6) User Manual / Operation Manual ▷ View online
43
Useful adjustment settings
WIDE MODE
Normal
Cinema
Full
Dot by Dot
Input signal
(640m480)
Input signal
(1024m768)
WIDE mode (for PC input mode)
You can select the screen size.
a
Press f.
• The WIDE MODE menu displays.
1
2
Press f or a/b to select a desired item on
the menu.
the menu.
WIDE MODE
Cinema
Full
Dot by Dot
Input Signal
Normal
Dot by Dot
Full
Cinema
Input Signal
Normal
Dot by Dot
Full
Cinema
640g480
Keeps the original
aspect ratio in a full
screen display.
aspect ratio in a full
screen display.
Keeps the original
aspect ratio in a full
screen display. The
top and bottom of
the image are
slightly cropped.
aspect ratio in a full
screen display. The
top and bottom of
the image are
slightly cropped.
Detects the
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.
An image fully fills
the screen.
the screen.
1024g768
NOTE
• Connect the PC before making adjustments. (See page
36.)
• Selectable screen size may vary with input signal type.
a
Screen size images.
Keeps the original
aspect ratio in a full
screen display. The
top and bottom of
the image are
slightly cropped.
aspect ratio in a full
screen display. The
top and bottom of
the image are
slightly cropped.
Detects the
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.
An image fully fills
the screen.
the screen.
LC-37GA4E(E)-i
04.6.18, 10:30 AM
43
44
3
4
Useful adjustment settings
Input signal (PC input mode only)
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
Press MENU and the MENU screen displays.
1
Press a/b to select “Input Signal” and then
press OK.
press OK.
Press a/b to select the desired input signal
on the display.
on the display.
720g400
848g480
1280g768
640g400
640g480
1024g768
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 6 input signals listed above.
2
Press c/d to select “Setup”.
DNR (Digital Noise Reduction)
Produces a clearer video image.
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “DNR”, and then press
OK.
OK.
• Some items may be greyed out. They are not
selectable.
Press a/b to select the desired level (Off,
High, Low), and then press OK.
High, Low), and then press OK.
4
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Quick Shoot”, and then
press OK.
press OK.
4
Press c/d to select “On”, and then press
OK.
OK.
NOTE
• Quick Shoot may cause image noise. If this occurs, turn
the function “Off”.
Quick Shoot
Improves LCD response when viewing fast-moving
images. The effect is greater at low room temperatures
(at or below 15˚C/59˚F).
images. The effect is greater at low room temperatures
(at or below 15˚C/59˚F).
LC-37GA4E(E)-i
04.6.18, 10:30 AM
44
45
Useful adjustment settings
Rotate
You can set the orientation of the picture.
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Setup”.
Press a/b to select “Rotate”, and then press
OK.
OK.
3
[Normal]: normal image.
[Mirror]: mirror image.
ABC
ABC
4
Press a/b to select the desired mode, and
then press OK.
then press OK.
[Upside Down]: upside
down image.
[Rotate]: rotated image.
ABC
ABC
LC-37GA4E(E)-i
04.6.18, 10:30 AM
45
46
Useful adjustment settings
INPUT 4
You can change the terminal settings depending on
the purpose of your usage, such as connecting
recording equipment to the INPUT 4/AUDIO OUTPUT
terminals to record broadcast programs or connecting
a player to play programs.
the purpose of your usage, such as connecting
recording equipment to the INPUT 4/AUDIO OUTPUT
terminals to record broadcast programs or connecting
a player to play programs.
Press MENU and the MENU screen displays.
1
2
Press a/b to select “INPUT 4”, and then
press OK.
press OK.
3
Press a/b to select ”AV Input”, ”Audio Out
(Fixed)” or “Audio Out (Variable)”, and then
press OK.
(Fixed)” or “Audio Out (Variable)”, and then
press OK.
4
Description
• Functions as the INPUT 4 terminals.
• Sound via speakers is adjusted with
il/k on the remote control unit or the
Display.
Display.
• Sound via the AUDIO OUTPUT terminal is
not adjustable and constantly outputs.
• Sound via the AUDIO OUTPUT terminal is
adjusted with il/k on the remote
control unit or the Display.
control unit or the Display.
• Sound via speakers is muted.
Selected item
AV Input
Audio Out
(Fixed)
(Fixed)
Audio Out
(Variable)
(Variable)
Press c/d to select “Option”.
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
switches to standby.
0 hr. 30 min.
1 hr. 00 min.
1 hr. 30 min.
2 hr. 30 min.
2 hr. 00 min.
Off
Each time you press SLEEP, the remaining
time switches as shown below.
time switches as shown below.
• When the time has been set, countdown
automatically starts.
• Five minutes before the preset of time expires,
the remaining time displays each minute.
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr. 00 min.
1
2
NOTE
• Select “Off” by pressing SLEEP to cancel the sleep timer.
NOTE
• ”INPUT 4” is greyed out when “Audio Out (Fixed)” or
“Audio Out (Variable)” is selected.
LC-37GA4E(E)-i
04.6.18, 10:30 AM
46
Click on the first or last page to see other LC-37GA4E (serv.man6) service manuals if exist.