DOWNLOAD Sharp LC-37GA4E (serv.man6) Service Manual ↓ Size: 3.56 MB | Pages: 62 in PDF or view online for FREE

Allows you to use a PIN to protect certain settings from
being accidentally changed.

Press MENU and the MENU screen displays.

Press a/b to select “Child Lock”, and then
press OK.

Enter the 4-digit number as a PIN using 0 –
9.

Press a/b to select “Change PIN”, and then
press OK.

Enter the same 4-digit number as in step 6
to confirm.

• “The system PIN has been changed

successfully” displays.

• To view a locked channel (Lock setting in Programme

Setup “Manual Adjust” is set to “On”), you must enter a
PIN. (See page 24.) When you select a locked channel, a
PIN prompt message pops up. Press OK to display the
PIN input window.

Press c/d to select “Setup”.

Allows you to reset your PIN.

Press a/b to select “Child Lock”, and then
press OK.

Press a/b to select “Cancel PIN”, and then
press OK.

Press c/d to select “Yes”, and then press
OK.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

• As a precautionary measure, make a note of your PIN

• This function is available for TV tuner mode.

New PIN

–

–

–

Reconfirm

–

–

–

–

–

Change PIN

Cancel PIN

New PIN

–

–

–

Reconfirm

–

–

–

–

–

Change PIN

Cancel PIN

If you already set the PIN, enter it here.

Enter the PIN.

–

–

–

–

–

–

–

–

LC-37GA4E(E)-i

04.6.18, 10:30 AM

47

You can use the speaker as the centre speaker when using a 5.1ch surround system.

Press c/d to select “On” , and then press
OK.

• Only the sound from the Centre Channel Input

terminal is output from the speaker.

Press MENU and the MENU screen displays.

Press c/d to select “Option”, and then press
OK.

Press a/b to select “Centre Channel Input”,
and then press OK.

* Connect to external audio equipment

that supports a 5.1ch surround system.
Refer to your external equipment
operation manual for details.

LC-37GA4E(E)-j

04.6.18, 10:31 AM

48

Allows you to display two pictures on the screen at
one time.

You can display two pictures except when inputting
from the INPUT 5 terminal.

Press c.

• Dual screen displays and a selected input

source image displays.

• This function does not work under the following input

conditions:
1INPUT 5 mode,
2Two pictures from the same source (e.g. INPUT 1 and

INPUT 1),

3Two pictures with different vertical frequency (e.g. PAL

and PAL-60),

4HDTV signal source (480P/1080i/720P) is input on the

right side screen display.

• When this function is not available, “No dual screen display

available.” will display.

Press  SELECT  to set either screen to be
active.

• “z” displays on the active screen, which has

sound output.

z

Press b to select another input source on
the active screen.

• A selected image displays.

Press c to exit dual screen.

z

Press d.

• A moving image displays on the left screen and

a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press d.

Update the still image by pressing OK.

• Each time you press OK, the image on the right

screen updates.

Press d to exit still image.

You can freeze a motion picture on the display.

• This function does not work in INPUT 5.
• When this function is not available, “No still image display

available.” will display.

• The still image automatically goes out after 30 minutes.

LC-37GA4E(E)-j

04.6.18, 10:31 AM

49

Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV
network, and decodes them into graphical format for
viewing. News, weather and sports information, stock
exchange prices and programme previews are among
the many services available.

Teletext is turned on/off with m on the remote control
unit. You can operate your TV in Teletext mode directly
by inputting commands with the remote control unit.

Select a TV channel or external input source
providing the Teletext programme.

Press m to display the Teletext.

Press m again to display the Teletext on the
right screen and normal image on the left
screen.

• Each time you press m, the screen switches

as shown upper right.

• If you select a programme with no Teletext

signal, “No Teletext available.” displays.

• The same message displays during dual

screen or other modes if no Teletext signal is
available.

• Press Pr to increase the page number.
• Press Ps to decrease the page number.

Colour (RED/GREEN/YELLOW/BLUE):
You can select a group or block of pages displayed in
the coloured  brackets at the bottom of the screen by
pressing the corresponding Colour (RED/GREEN/
YELLOW/BLUE) on the remote control unit.

0 – 9:
Directly select any page from 100 to 899 by using 0 – 9.

f:
Each time you press f, the TELETEXT image switches
as shown below.

k:
To reveal hidden information such as an answer to a
quiz, press k.

• Press k again to hide the information.

d:
To stop updating Teletext pages automatically, press d.

• Press d again to release the hold mode.

LC-37GA4E(E)-j

04.6.18, 10:31 AM

50