DOWNLOAD Sharp LC-37GA4E (serv.man6) Service Manual ↓ Size: 3.56 MB | Pages: 62 in PDF or view online for FREE

01 SAT.1

02 PR07

03 KABEL

01 SAT.1

02 PR07

03 KABEL

01 55.25

02 85.25

03 102.25

When the TV powers on for the first time after purchase
(see page 15), the initial auto installation is invoked.
You can automatically set language, country and
channels in successive operations.

1 Press a/b/c/d to select your country

or area listed on the screen.

2 Press OK to enter the setting.

• The programme auto search starts at the same

time.

1 Press  a/b/c/d to select the desired

language listed on the screen.

2 Press OK to enter the setting.

After this setting, auto search starts with the following
order.

1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download

You do not need to do anything during the auto search.

• The illustrations and on-screen displays in this manual

are for explanation purposes and may vary slightly from
the actual operations.

After finding TV channels, the TV starts naming each
TV channel found.

• The TV can only name channels where the channel

labelling information is provided. If no channel labelling
information is provided, the TV only displays the channel
number, leaving the channel name blank.

Channel auto search finds all channels viewable in
your area.

• If no channel is found, “No programme found.” displays.

And the auto installation finishes.

When auto sorting finishes, the TV automatically
downloads and stores each sorted channel from VCR.

• When a VCR is connected via INPUT 2, the TV sends all

preset channel information to the VCR. (See page 33.)

• “Auto Installation completed.” displays. After that, the

screen changes to the auto installation menu.

When channel auto labelling finishes, the TV starts
sorting the labelled channels.

The setup menu disappears and you can watch the
programme on channel 1.

• The initial auto installation functions only once. If the initial

auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
set up menu. (See page 21.)

• The initial auto installation stops by pressing RETURN.

Austria
Belgium
Denmark
Finland
France
Germany
Greece
Ireland
Italy
Luxembourg
Netherlands
Norway

Poland
Portugal
Russia
Spain
Sweden
Switzerland
Turkey
United Kingdom
West Europe
East Europe

Dutch
English
Finnish
French
German
Greek
Italian

Polish
Portuguese
Russian
Spanish
Swedish
Turkish

LC-37GA4E(E)-b

04.6.18, 9:21 AM

11

POWER button (a)

INPUT button

VOLUME buttons ( il/k )

CHANNEL buttons

(Ps/r)

*OPC: Optical Picture Control

(See page 26.)

POWER indicator

OPC sensor

Remote control sensor

SLEEP timer indicator

OPC indicator

Headphone jack

Remote control sensor indicator

LC-37GA4E(E)-b

04.6.18, 9:21 AM

12

RESET*

INPUT 3 terminals

SYSTEM RESET**

Antenna input terminal

* Press RESET if the TV cannot return to its original state after performing various operations.

• AV MODE resets to USER.
• Analogue TV channel resets to channel 1.
• Dual picture resets to normal.
• Audio setting initializes.
• Dolby Virtual resets to Off.
• Image position initializes.

** Press SYSTEM RESET if the TV does not operate after starting up.

• Pressing RESET will not work if the TV is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and PIN. See page 47 for resetting the PIN when you know it. See page 59

for initializing to the factory preset values when you forget your PIN.

DC OUTPUT terminal
(Terminal for expanded
functionality in the near future.)

SPEAKER
terminals

AC INPUT
terminal

RS-232C terminal

INPUT 2 terminal

INPUT 1 terminal

INPUT 5 terminal

CENTRE CHANNEL
INPUT terminal

INPUT 4/AUDIO OUTPUT terminals
(switchable)

LC-37GA4E(E)-b

04.6.18, 9:21 AM

13

• When using the remote control unit, point it at the Display.

B (STANDBY/ON)
To switch the power on and off. (See page 15.)

OPC
To switch the Optical Picture Control on and off. (See page
26.)

c (DUAL screen)
Set the dual picture mode. Press c again to return to normal
view. (See page 49.)
SELECT
To select either screen to be active in Dual screen mode.

d (FREEZE/HOLD)
TV/External input mode: Change the still image mode.
TELETEXT mode: Freeze a multi-page on screen while other
pages are automatically updated. Press d again to return to
the normal image. (See pages 49 and 50.)

f (WIDE MODE)
TV/External input mode: Change the wide image mode. (See
pages 42 and 43.)
TELETEXT mode: Set the area of magnification. (full/upper half/
lower half) (See page 50.)

ROTATE
Rotates the display in every direction. (See page 45.)

Select Virtual Dolby Surround settings. (See page 18.)

0 – 9
TV/External input mode: Set the channel.
TELETEXT mode: Set the page.

A (Flashback)
Press to return to the previous image in normal viewing mode.
(See page 16.)

[ (SUBTITLE for TELETEXT)
TV/External input mode: To turn the subtitles on and off. (See
page 51.)

k (Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page 50.)

SOUND
Select the sound multiplex mode. (See page 17.)

il/ik (VOLUME)
Set the volume. (See page 17.)

e (MUTE)
Mute the sound. (See page 18.)

EXIT
Turn off the On Screen Display.

SLEEP
Set the Sleep timer. (See page 46.)

p (DISPLAY INFORMATION)
Display the programme information.

AV MODE
Select a video setting: AV MODE (STANDARD, MOVIE, GAME,
USER, DYNAMIC), PC MODE (STANDARD, USER) (See page
41.)

3D–Y/C
To switch the 3D–Y/C function on and off. (See page 29.)

o (Digit for channel select)
Change the digits of the selected TV channel. (See page 16.)

m (TELETEXT)
Select the TELETEXT mode. (all TV image, all TEXT image, TV/
TEXT image) (See pages 50 and 51.)

l (TOP Overview for TELETEXT)
TELETEXT mode: Display an index page for CEEFAX/FLOF
information. TOP Overview for TOP programme. (See page 51.)

Pr/Ps
TV/External input mode: Select the channel or switch to either
TV input mode.
TELETEXT mode: Set the page. (See page 50.)

b (INPUT SOURCE)
Select an input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT
4, INPUT 5) (See pages 32, 39, 40 and 49.)

MENU
Display the menu screen.

a/b/c/d (Cursor)
Select a desired item on the setting screen.

OK
Execute a command.

RETURN
MENU mode: Return to the previous menu screen.

Colour (RED/GREEN/YELLOW/BLUE)
TELETEXT mode: Select a page. (See page 50.)

LC-37GA4E(E)-b

04.6.18, 9:21 AM

14