Sharp LC-37GA4E (serv.man6) User Manual / Operation Manual ▷ View online
7
TV (rear view)
Setting the TV
After putting the TV in place, connect the AC cord.
Connecting the AC cord to the TV
1
2
3
Removing the terminal cover
Bundling the cables
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Press down the hooks
to remove the cover
toward you.
to remove the cover
toward you.
AC cord
CAUTION
Adjust the screen with both hands. Put one
hand on the Display and tilt the screen while
steadying the stand with your other hand.
You can adjust the screen vertically up to 2 de-
grees forward or 6 degrees backward, or rotate 20
degrees horizontally.
hand on the Display and tilt the screen while
steadying the stand with your other hand.
You can adjust the screen vertically up to 2 de-
grees forward or 6 degrees backward, or rotate 20
degrees horizontally.
Product shape varies in some
countries.
countries.
Preparation
LC-37GA4E(E)-a
04.6.18, 9:22 AM
7
8
Preparation
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
NOTE
• To attach the stand, perform the above steps in reverse order.
2
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of
the base area.)
(Hold the stand so it will not drop from the edge of
the base area.)
1
Unfasten the four screws used to secure the
stand in place.
stand in place.
Setting the TV on the wall
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
mounting or mounting that results in accident or injury.
• You can ask a qualified service personnel about using an optional AN-37AG2 bracket to mount the TV to the
wall.
LC-37GA4E(E)-b
04.6.18, 9:21 AM
8
9
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
Using the remote control unit
Use the remote control unit by pointing it towards the remote sensor window.
Objects between the remote control unit and sensor window may prevent proper
operation.
Objects between the remote control unit and sensor window may prevent proper
operation.
Cautions regarding remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place
in an area with high humidity.
in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor window of
the Display is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or Display, or operate the remote control unit closer to
the remote sensor window.
the angle of the lighting or Display, or operate the remote control unit closer to
the remote sensor window.
Preparation
30
°
30
°
Remote
control sensor
7 m
23 feet
1
Press and slide the battery cover to open it.
2
Insert two supplied “AAA” size batteries.
• Place batteries with their terminals corresponding to
the (e) and (f) indications in the battery
compartment.
compartment.
3
Close the battery cover.
LC-37GA4E(E)-b
04.6.18, 9:21 AM
9
10
Preparation
Simple operations for watching a TV programme
Basic connection
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of connecting to an
antenna with a coaxial cable.
antenna with a coaxial cable.
Antenna cables–commercially available
If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325
plug (IEC 169-2), plug it into the IN terminal at the rear of the TV.
plug (IEC 169-2), plug it into the IN terminal at the rear of the TV.
LC-37GA4E(E)-b
04.6.18, 9:21 AM
10
Click on the first or last page to see other LC-37GA4E (serv.man6) service manuals if exist.