DOWNLOAD Sharp LC-37D65 (serv.man10) Service Manual ↓ Size: 6.99 MB | Pages: 48 in PDF or view online for FREE

You can use this menu to set the appropriate picture 
size for viewing a 16:9 format TV programme on a 4:3 
TV.

This function allows you to automatically change to the 
appropriate picture size when viewing an HDMI signal 
using the HDMI1, 2 and 3 terminals.

This function must be set before recording.

•

For adjusting a picture’s horizontal and vertical 
position.

Adjustments are stored separately for each input source.
Depending on the input signal type or “WIDE MODE” 
setting, a position setting may not be available.
This function is not available for DTV broadcasts with 
MHEG signals.

•
•

•

Different sound sources sometimes do not have the 
same volume level, such as a programme and its 
commercial breaks. The Automatic Volume Control 
(Auto Volume) reduces this problem by equalizing 
levels.

This function emphasises speech against background 
noise for greater clarity. It is not recommended for 
music sources.

When listening to music from a music programme, you 
can set the TV off and enjoy audio only.

 Centres the image by moving it to the left or 

right.

 Centres the image by moving it up or down.

 Both screen images and audio are output.

 Audio is output without a screen image.

LC-3237D65E_GB.indd   31

LC-3237D65E_GB.indd   31

2008/07/08   18:52:58

2008/07/08   18:52:58

You can select the time format (either “24HR” or “AM/
PM”) for the clock time.

This function allows you to display the elapsed time on 
the screen when “AV MODE” is set to “GAME”.

This function allows you to display programme 
information such as the title and airtime by tuning a 
channel.

This function is available only when the DTV mode is 
selected.

•

This function allows you to display the clock time in the 
lower-right corner of the screen.

Four digit numbers (e.g. 0001) are displayed after 
selecting the five Nordic countries in the country 
setting.

You can display the time information included in DTV 
and teletext broadcasts.

Skip step 1 if receiving DTV broadcasts.

Select a TV channel (The time information is 

automatically captured).
Press p. The channel display will appear on 

the TV.
Press p again within the several seconds 

that the channel display is on the screen. Time 

information will be shown in the lower-right 

corner of the screen for several seconds.
Even when you change the TV channel, you can 

display the time information with steps 2 and 3 

above.

If acquired successfully, the time information will appear in 
the upper-right corner of the screen by pressing MENU.

*

E

•

•

Subtitle ENG 

1/3

: 

New Information 

Audio (ENG)  STEREO 

: 

Video 1080i 

: 

DTV 

BBC2 

Subtitle Teletext Off

:

New Information 

PAL

I

NICAM

STEREO

ATV

BBC1

You can display the channel information by pressing 
p on the remote control unit.

 Displays the clock time.

 Displays the clock time in 30-minute 

increments.

 Hides the clock time.

 Under connecting a game console to the TV, the 

elapsed time is displayed in 30-minute increments after 
you start playing a game.

 Hides the time.

This menu is not selectable if the input source is “TV” or 
“USB”.

•

LC-3237D65E_GB.indd   32

LC-3237D65E_GB.indd   32

2008/07/08   18:52:58

2008/07/08   18:52:58

For setting the signal type of external equipment.

If no (colour) image displays, try changing to another 
signal type.
Check the operation manual of the external equipment for 
the signal type.

•

•

You can label each input source with a custom 
description.

Press b to select the desired input source.
Go to “MENU” > “Setup” > “Input Label”.
Press a/b/c/d to select each character of the 

new name for the input source, and then press 
OK

.

A 

BACK 

CLEAR 

END 

K 

U 

B 

L 

V 

C 

M 

W 

D 

DVD 

N 

X 

E 

O 

Y 

F 

P 

Z 

G 

Q 

+ 

H 

R 

– _ 

I 

S 

. 

J 

T 

0 1 2 3 4 5 6 7 8 9 

Repeat until the label is fully spelt out.

The label can be six characters or less.
When you want to set an input source label of less than six 
characters, select “END” to set the name.

INPUT SOURCE 
TV 

EXT1
EXT2

DVD

EXT4
HDMI1
EXT6

You cannot change labels if the input source is “TV” or 
“USB”.

•
•

•

This setting allows you to skip the SCART, HDMI or 
RGB input on the Input Source Selection operation.

EXT1 (SCART)

EXT2 (SCART)

EXT4 (RGB)
HDMI1

HDMI2

HDMI3

Y es 

No 

You can change the colour system to one that is 
compatible with the image on the screen.

The factory preset value is “Auto”.
If “Auto” is selected, the colour system for each channel 
is automatically set. If an image does not display clearly, 
select another colour system (e.g. “PAL”, “SECAM”).

•
•

You can reduce the TV’s start-up time after turning on 
the power with the remote control unit.

Y/C, CVBS, RGB

Y/C, CVBS, RGB

 The TV quickly starts up from standby. 30 W or more 

of power consumption is required during standby.

 Power consumption is small during standby.

LC-3237D65E_GB.indd   33

LC-3237D65E_GB.indd   33

2008/07/08   18:52:59

2008/07/08   18:52:59

In this mode, you can enjoy viewing 
photos and listening to music from 
external USB devices. Select “USB” 
from the “INPUT SOURCE” menu to 
enter this mode.

You cannot enter this mode when there 
is no USB device connected to the TV.
This mode is not available during DTV 
timer recording.
“WIDE MODE” is fixed during this mode.
“USER (USB)” is the default value for 
the “AV MODE” setting. Each time you press AV MODE, 
the mode changes between “USER (USB)”, “DYNAMIC 
(Fixed)”, “DYNAMIC” and “STANDARD”.

•

•

•
•

Connect an USB device to the TV as shown below.

Select Mode 

Select USB drive 

Photo Mode 

Music Mode 

Drive 1 

Drive 2 

Drive 3 

Drive 4 

Drive 5 

Drive 6 

Drive 7 

Drive 8 

Drive 9 

Drive 10 

Drive 11 

Drive 12 

Drive 13 

Drive 14 

Drive 15 

Drive 16 

Press c/d to select between “Photo Mode” 

and “Music Mode”, and then press OK.
Press a/b/c/d to select the drive where you 

want to find your files, and then press OK.

You do not need to select the drive in step 2 when there is 
only one drive in the connected USB device.
16 is the maximum number of drives that can be displayed.

•

•

2007:10:18 13:30:00
600KB

Demo/Demo 01
Demo.jpg

1600X1200

Sample

When selecting the folder icon with the 
6 mark: Go back to the parent directory.
When selecting a folder icon: Enter this 
directory.
When selecting a photo thumbnail: 
Display the photo in full screen.

a/b/c/d 
(Cursor)

Select a desired item.

6

Return to the top menu.

Go back to the previous page.

Go to the next page.

Select BGM for the slide show.

Start the slide show. 

When there are invalid photo files, the 

g mark will be 

displayed for the file.
You can see the file name, shooting date, file size and 
pixel size of the selected photo in the lower-left corner of 
the screen (shooting date is only available in the EXIF file 
format).

c/d (Cursor)

Go to the previous/next photo in the 
same directory.

6

Return to the thumbnail selection screen.

Rotate the photo by 90 degrees to the 
left.

Rotate the photo by 90 degrees to the 
right.

Reveal/hide the Guide Display.

Rotating photos only applies to the temporarily selected 
item and this setting is not saved.

•

•

•

Depending on the USB device, the TV may not be able to 
recognise the contained data.
Use only alphanumeric characters for naming files.
File names over 80 characters (may vary depending on 
character set) may not be displayed.
Do not disconnect a USB device or memory card from the 
TV while transferring files, using the slide show function, 
when a screen is switching to another or before you exit 
“USB” from the “INPUT SOURCE” menu.
Do not connect and disconnect a USB device from the TV 
repeatedly.

•

•
•

•

•

INPUT SOURCE
TV

EXT1
EXT2
EXT3
EXT4
HDMI1
HDMI2
HDMI3
EXT8

USB

LC-3237D65E_GB.indd   34

LC-3237D65E_GB.indd   34

2008/07/08   18:53:00

2008/07/08   18:53:00