Sharp LC-37D65 (serv.man10) User Manual / Operation Manual ▷ View online
Channel Settings
Auto Installation
Basic adjustment
Auto Installation
Setup
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
After selecting “Yes” on the screen, you can set
language and channel search the same as in the
initial auto installation. Follow steps 2, 5 and 6
on page 9.
NOTE
You cannot set the Home/Store setting and the country
setting in “Auto Installation” in the “Setup” menu. If you
want to reconfigure those settings, automatically execute
initial auto installation after executing “Reset” from the
“Setup” menu.
The current country setting is displayed on the screen.
setting in “Auto Installation” in the “Setup” menu. If you
want to reconfigure those settings, automatically execute
initial auto installation after executing “Reset” from the
“Setup” menu.
The current country setting is displayed on the screen.
•
•
Manual Adjust
Configure various settings for each service using the
Colour (R, G, B)
Colour (R, G, B)
buttons.
DTV 993
Service
No.
Old
LCN
CH
Skip
Lock
Service
Name
SIT 3
SIT 3
DTV 994
✔
SIT 2
DTV 995
✔
SIT 1
DTV
999
HD Monosco
: Lock
R
: CH Skip
G
: Sort
B
Press a/b to select the desired service.
Press the colour button on the remote control unit
Press the colour button on the remote control unit
corresponding with the item you want to reconfigure.
The
✔ mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.
corresponding operation on/off.
E
1
2
2
•
Programme Setup
Setup
Digital channel settings
Digital Setting
You can reconfigure the DTV service settings
automatically or manually.
automatically or manually.
Additional Search
Use this menu to add new services automatically after
auto installation has been completed.
auto installation has been completed.
Manual Search
Add new services within a specified frequency band.
Enter the frequency using 0–9 numeric buttons.
You can perform “Manual Search” with a service number
only when the five Nordic countries have been selected in
the country setting.
You can perform “Manual Search” with a service number
only when the five Nordic countries have been selected in
the country setting.
E
E
•
•
•
27
Buttons for Manual Adjust operation
Lock: Press R button.
When the service is locked, you must enter your PIN
whenever you tune to the service.
whenever you tune to the service.
CH Skip: Press G button.
Services with a
✔ mark are passed over when pressing
P
r/s on the TV or remote control unit.
Sort: Press B button.
The item position of services can be sorted.
Press
a/b to select the service whose item
position you want to move, and then press OK.
DTV 994
✔
SIT 2
DTV 995
✔
SIT 1
Press
a/b to move it to the desired position,
and then press OK.
DTV
994
✔
SIT 1
DTV
995
✔
SIT 2
Repeat steps 1 and 2 until all desired service
items are sorted.
items are sorted.
1
2
3
LC-3237D65E_GB.indd 27
LC-3237D65E_GB.indd 27
2008/07/08 18:52:54
2008/07/08 18:52:54
Basic adjustment
Channels with “Skip” set to “On” are passed over
when using P
when using P
r/s even if selected while watching
the image from the TV.
When connecting a decoder to the TV, you need to
select “EXT1” or “EXT2”.
select “EXT1” or “EXT2”.
NOTE
The factory preset value is “Off”.
•
You can block the viewing of any channel.
NOTE
See “Child Lock” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has
been activated” displays, and the image and sound of the
channel are blocked.
When pressing
When “Lock” is set to “On” for a channel, “Child lock has
been activated” displays, and the image and sound of the
channel are blocked.
When pressing
6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the
correct PIN unlocks the “Child Lock” temporarily until the
power is turned off.
correct PIN unlocks the “Child Lock” temporarily until the
power is turned off.
Sort
Channel positions can be sorted freely.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you want
Press a/b/c/d to select the channel you want
to move, and then press OK.
Press a/b/c/d to move it to the desired
Press a/b/c/d to move it to the desired
position, and then press OK.
Repeat steps 2 and 3 until all desired channels
Repeat steps 2 and 3 until all desired channels
are sorted.
Erase Programme
Channels can be erased individually.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you want
Press a/b/c/d to select the channel you want
to erase, and then press OK.
A message window pops up.
Press c/d to select “Yes”, and then press
OK
OK
to erase the selected channel. All the
subsequent channels move up.
Repeat steps 2 and 3 until all desired channels
Repeat steps 2 and 3 until all desired channels
are erased.
•
•
•
•
E
1
2
2
3
4
E
1
2
2
•
3
4
Programme Setup
Setup
Analogue Setting
You can reconfigure the analogue TV channels settings
automatically or manually.
automatically or manually.
Additional Search
Use this menu to add new channels automatically after
auto installation has been made.
auto installation has been made.
Start searching channels after selecting the colour system
and sound system.
and sound system.
Manual Adjust
Use this menu to set up analogue TV channels
manually.
manually.
After selecting “Yes” on the screen, press a/b/
c
/d to select the channel you want to set and
then press OK.
E
•
E
You can adjust the frequency to the desired position.
NOTE
Adjust while checking the background picture as a
reference.
Instead of pressing
reference.
Instead of pressing
c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0–9 numeric buttons.
channel with 0–9 numeric buttons.
EXAMPLE
179.25 MHz: Press 1
s 7 s 9 s 2 s 5.
49.25 MHz: Press 4
s 9 s 2 s 5 s OK.
•
•
•
•
•
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”).
“PAL”, “SECAM”).
Select the optimum sound systems (Broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
When a TV channel sends its Network Name, the
“Auto Installation” detects the information and assigns
a name to it. However, you can change channel names
individually.
“Auto Installation” detects the information and assigns
a name to it. However, you can change channel names
individually.
Press a/b/c/d to select each character of the
new name for the channel, and then press OK.
Repeat step 1 above until the name is fully spelt
Repeat step 1 above until the name is fully spelt
out.
NOTE
The name can be five characters or less.
If a channel name is less than five characters, select “END”
to set the channel name.
If a channel name is less than five characters, select “END”
to set the channel name.
1
2
•
•
•
Analogue channel settings
28
Fine
Colour sys.
Sound sys. (Broadcasting systems)
Label
Skip
Decoder
Lock
LC-3237D65E_GB.indd 28
LC-3237D65E_GB.indd 28
2008/07/08 18:52:55
2008/07/08 18:52:55
Basic adjustment
Child Lock
Setup
Allows you to use a PIN to protect certain settings
from being accidentally changed.
from being accidentally changed.
Change PIN
Register a four-digit password number to use the
“Child Lock” function.
“Child Lock” function.
Enter the four-digit number as a PIN using 0–9
numeric buttons.
Enter the same four-digit number as in step 1 to confirm.
Enter the same four-digit number as in step 1 to confirm.
“The system PIN has been changed successfully” displays.
NOTE
To view a locked channel, you must enter the PIN (See pages 27
and 28 for locking channels from viewing in DTV and ATV mode).
When you select a locked channel, a PIN prompt message pops
up. Press
and 28 for locking channels from viewing in DTV and ATV mode).
When you select a locked channel, a PIN prompt message pops
up. Press
6 to display the PIN input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
As a precautionary measure, make a note of your PIN on the
back of this operation manual, cut it out and keep it in a safe
place that children cannot reach.
back of this operation manual, cut it out and keep it in a safe
place that children cannot reach.
Parental rating
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
It prevents children from watching violent or sexual
scenes that may be harmful.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings used
exclusively in France.
Refer to page 44 for details about ratings.
exclusively in France.
Refer to page 44 for details about ratings.
1
2
•
•
•
•
•
Language
Setup
You can select a OSD language from the “Setup”
menu. Select from among 23 languages (Czech,
Danish, Dutch, English, Estonian, Finnish, French,
German, Greek, Hungarian, Italian, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish, Ukrainian).
menu. Select from among 23 languages (Czech,
Danish, Dutch, English, Estonian, Finnish, French,
German, Greek, Hungarian, Italian, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish, Ukrainian).
Subtitle
Digital Setup
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
subtitles for the hearing impaired) to display if subtitles
are available.
NOTE
Subtitles will not be displayed when the service does not contain
subtitle information.
subtitle information.
•
Digital Audio Language
Option
Set up to three preferred multi audio languages to
display if the audio languages are available.
display if the audio languages are available.
Switching the multi audio languages
Each time you press
2 on the remote control unit,
the audio language switches.
E
Key Lock
Option
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
or remote control unit in order to prohibit children from
changing the channel or volume.
NOTE
You cannot set both “RC Control Lock” and “Button Control Lock”
at the same time.
at the same time.
Cancelling the lock
Press the MENU button on the TV and set to “Off” to
cancel the “RC Control Lock”. Press the MENU button
on the remote control unit and set to “Off” to cancel
the “Button Control Lock”.
cancel the “RC Control Lock”. Press the MENU button
on the remote control unit and set to “Off” to cancel
the “Button Control Lock”.
Refer to page 23 for menu operation using the MENU button on
the TV.
the TV.
•
E
•
1st Language
E 2nd Language
For hearing impaired
E
E
E
Switching subtitle languages
Each time you press
[ on the remote control unit, the
subtitle switches.
E
Password/Parental lock settings
Off:
Unlocks the buttons.
RC Control Lock:
Locks all buttons on the remote control unit.
Button Control Lock:
Locks the buttons on the TV except the
power switch.
Language Settings (language,
subtitle, multi audio)
subtitle, multi audio)
1st Language
Off
2nd Language
• • • • • •
1st Language
1st Language
(For hearing impaired)
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over
each of the subtitle language settings (Example: “1st
Language”, “2nd Language”, etc.).
each of the subtitle language settings (Example: “1st
Language”, “2nd Language”, etc.).
EXAMPLE
E
29
Item
Selectable items
LC-3237D65E_GB.indd 29
LC-3237D65E_GB.indd 29
2008/07/08 18:52:55
2008/07/08 18:52:55
Useful Viewing functions
WSS
Setup
WSS signal 4:3 screen
4:3 Mode
Setup
The “WSS” signal has 4:3 auto-switching that allows
you to select between “Normal” and “Panorama”.
you to select between “Normal” and “Panorama”.
4:3 mode “Panorama”
4:3 mode “Normal”
The “WSS” allows the TV to switch automatically
among the different picture size.
among the different picture size.
NOTE
Use “WIDE MODE” if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no “WSS” information, the function will not work
even if enabled.
appropriate picture size. When the broadcast signal
contains no “WSS” information, the function will not work
even if enabled.
Selecting the WSS (Wide Screen
Signalling) picture size manually
Signalling) picture size manually
•
Selecting the picture size
Selecting the WSS (Wide Screen
Signalling) picture size automatically
Signalling) picture size automatically
Normal:
Normal range keeping 4:3 or 16:9 aspect ratio.
Panorama:
Wide image without side bars.
Selecting the picture size manually
You can select the picture size. Selectable picture size
varies with the type of signal received.
varies with the type of signal received.
Normal:
Keeps the original aspect ratio in a full screen
display.
Zoom 14:9:
For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also see bars on
the top and bottom with some programmes.
the top and bottom with some programmes.
Panorama:
In this mode, the picture is stretched toward
each side of the screen. The picture may appear similar
to “Full” depending on broadcast signals.
to “Full” depending on broadcast signals.
Full:
For 16:9 squeeze pictures.
Cinema 16:9:
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Cinema 14:9:
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Full:
Displays with an Overscan image. Crops all sides of
screen.
Underscan:
Displays with an Underscan image only
when receiving a 720p signal. Displays with the High-
Definition image adjusted optimally. Noise may appear
on the edge of the screen with some programmes.
Definition image adjusted optimally. Noise may appear
on the edge of the screen with some programmes.
Dot by Dot:
Displays an image with the same number
of pixels on the screen when receiving 1080i/1080p
signals only.
signals only.
NOTE
Some items do not appear depending on the type of
received signal.
received signal.
Press f.
The “WIDE MODE” menu displays.
The menu lists the “WIDE MODE” options selectable
for the type of video signal currently received.
The menu lists the “WIDE MODE” options selectable
for the type of video signal currently received.
Press f or a/b while the “WIDE MODE”
menu displays on the screen.
As you toggle the options, each is immediately
reflected on the screen. There is no need to press OK.
reflected on the screen. There is no need to press OK.
Basically, if you set “WSS” to “On” in the “Setup”
menu, the optimum “WIDE MODE” is automatically
chosen for every broadcast, VCR or DVD player/
recorder.
menu, the optimum “WIDE MODE” is automatically
chosen for every broadcast, VCR or DVD player/
recorder.
NOTE
Even if you select your desired “WIDE MODE” manually,
the TV may automatically switch to the optimum “WIDE
MODE” depending on the signal received when “WSS” is
set to “On”.
the TV may automatically switch to the optimum “WIDE
MODE” depending on the signal received when “WSS” is
set to “On”.
•
1
•
•
•
2
•
•
30
Item
Item (for SD [Standard-Definition] signals)
Item (for HD [High-Definition] signals)
LC-3237D65E_GB.indd 30
LC-3237D65E_GB.indd 30
2008/07/08 18:52:57
2008/07/08 18:52:57
Click on the first or last page to see other LC-37D65 (serv.man10) service manuals if exist.