Sharp LC-32LE700E (serv.man14) User Manual / Operation Manual ▷ View online
8
Before turning on the power
2
*
1
Cable clamp (bundle the cables with the clamp)
Standard DIN45325 plug (IEC 169-2) 75
q coaxial cable
Turn on (;) the MAIN POWER switch on the left side of the TV.
AC cord (product shape varies in some countries)
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type
causes unnecessary electrical wave emissions or interference.
causes unnecessary electrical wave emissions or interference.
*
Place the TV close to the AC outlet,
and keep the power plug within
reach.
and keep the power plug within
reach.
Supplying power to the antenna
You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting
the antenna cable to the antenna terminal on the rear of the TV.
the antenna cable to the antenna terminal on the rear of the TV.
Press @ and the “MENU” screen displays.
Press
Press
c/d to select “Setup”.
Press
a/b to select “Antenna setup-DIGITAL”, and then press ;.
Press
a/b to select “Supply voltage”, and then press ;.
Press
c/d to select “On”, and then press ;.
1
2
3
4
5
2
3
4
5
Mounting the TV on a wall
This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 45).
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
Only for 40 inch models.
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
Only for 40 inch models.
•
•
•
•
*
•
*
Quick guide
LC-LE700E_GB.indd 8
LC-LE700E_GB.indd 8
2009/07/13 14:51:25
2009/07/13 14:51:25
9
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
Confirm the following before turning on
the power
the power
Is the antenna cable connected?
Is the AC cord plugged in?
Is the MAIN POWER switch turned on (;)?
Is the AC cord plugged in?
Is the MAIN POWER switch turned on (;)?
E
E
E
E
E
Press a on the TV.
The initial auto installation wizard appears.
Setting the OSD language.
Press
a/b/c/d to select the desired language,
and then press
;.
Selecting the location of the TV.
HOME
STORE
Press
c/d to select where you will use this TV,
and then press
;.
HOME: “STANDARD” will be the default value for the “AV
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for
the “AV MODE” setting. If the “AV MODE” is changed,
the TV will automatically switch back to “DYNAMIC
(Fixed)” when there is no signal input from the TV or
remote control unit for 30 minutes.
A demonstration image will be displayed after initial auto
installation is completed. If you have chosen “STORE” by
mistake, go to “Setup” > “Reset” > select “HOME” again.
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for
the “AV MODE” setting. If the “AV MODE” is changed,
the TV will automatically switch back to “DYNAMIC
(Fixed)” when there is no signal input from the TV or
remote control unit for 30 minutes.
A demonstration image will be displayed after initial auto
installation is completed. If you have chosen “STORE” by
mistake, go to “Setup” > “Reset” > select “HOME” again.
Setting the country.
Austria
Finland
Greece
Press
a/b/c/d to select your country or area,
and then press
;.
This setting screen only appears during the first
installation.
installation.
1
•
2
3
•
•
•
4
•
NOTE
If you set “Sweden” in the country setting, you can select
the cable provider “ComHem”. Refer to the
the cable provider “ComHem”. Refer to the
H mark
in the following steps or instructions about the settings for
“ComHem”.
“ComHem”.
Starting channel search.
Digital search
Analogue search
Press
c/d to select “Digital search” or “Analogue
search”, and then press
;.
To watch both analogue broadcasts and digital
broadcasts, you should perform the channel search
setting for each format.
If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup” menu
(Pages 27_29).
broadcasts, you should perform the channel search
setting for each format.
If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup” menu
(Pages 27_29).
NOTE
If you turn off the power on the TV while performing a channel
search, the initial auto installation wizard will not appear. The
auto installation function allows you to execute the installation
again from the “Setup” menu (Page 27).
The initial auto installation wizard will abort if you leave the TV
unattended for 30 minutes before searching for channels.
After initial auto installation is completed, the default PIN is
automatically set to “1234”. To change the PIN setting, refer to
Password/Parental lock settings
search, the initial auto installation wizard will not appear. The
auto installation function allows you to execute the installation
again from the “Setup” menu (Page 27).
The initial auto installation wizard will abort if you leave the TV
unattended for 30 minutes before searching for channels.
After initial auto installation is completed, the default PIN is
automatically set to “1234”. To change the PIN setting, refer to
Password/Parental lock settings
(Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN
THE PIN
(Page 46).
When “Italy” is selected in the country setting, the default age
restriction value is set to 18.
restriction value is set to 18.
Digital broadcast setting
Press
c/d to select “Terrestrial” or “Cable”,
and then press
;.
Terrestrial
Cable
H
When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the
cable provider “ComHem”.
“Cable” for the searching format, you can select the
cable provider “ComHem”.
Searching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
•
5
•
•
•
•
•
•
•
E
•
Quick guide
LC-LE700E_GB.indd 9
LC-LE700E_GB.indd 9
2009/07/13 14:51:25
2009/07/13 14:51:25
10
Quick guide
Searching for cable broadcasts
To change each item to the appropriate
settings:
settings:
Press
a/b to select the menu, and then
press
;.
Scrambled stations
[Yes]
[Channel]
[None]
Search method
Start frequency
Network ID
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
Press
a/b/c/d or 0_9 to select or input
the appropriate item/value, and then press
;.
Press
;.
Press
a/b to select “Search start”, and then
press
;.
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
the receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
H
The “Scrambled stations” menu and the “Search method”
menu are not displayed on the screen as each menu item is
fixed.
The value of “Start frequency” and “Network ID” should be set
to the value specified by the cable provider.
menu are not displayed on the screen as each menu item is
fixed.
The value of “Start frequency” and “Network ID” should be set
to the value specified by the cable provider.
E
1
2
3
4
•
•
•
Menu
Description
Selectable items
Scrambled
stations
stations
Specifies if you
need to add pay-TV
services.
need to add pay-TV
services.
Yes, No
Search
method
method
Specifies how you
search channels.
search channels.
Channel: Extracts all
of information from a
channel (quick, but
needs corresponding
TV stations).
Frequency: Checks
every frequency in
range (slow).
of information from a
channel (quick, but
needs corresponding
TV stations).
Frequency: Checks
every frequency in
range (slow).
Start
frequency
frequency
From 47.0_858.0
MHz
MHz
Network ID
Specifies the network.
Set this to register
only the specified
network ID without
registering any special
services.
Set this to register
only the specified
network ID without
registering any special
services.
None, 0_65535
Symbol
rate 1*
rate 1*
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
Symbol
rate 2*
rate 2*
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
QAM
modulation 1
modulation 1
16, 32, 64, 128, 256
QAM
modulation 2
modulation 2
None, 16, 32, 64,
128, 256
128, 256
Set up “Symbol rate 2” if the cable provider uses several
symbol rates.
symbol rates.
H
When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the cable
provider “ComHem”. Follow the screen prompts.
“Cable” for the searching format, you can select the cable
provider “ComHem”. Follow the screen prompts.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
*
•
•
LC-LE700E_GB.indd 10
LC-LE700E_GB.indd 10
2009/07/13 14:51:26
2009/07/13 14:51:26
11
Quick guide
Checking signal strength and
channel strength (DVB-T/C)
channel strength (DVB-T/C)
If you install a DVB-T/C antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
Press @ and the “MENU” screen
displays.
displays.
Press
c/d to select “Setup”.
Press
a/b to select “Antenna setup-
DIGITAL”, and then press
;.
Checking signal strength
Press
a/b to select “Signal strength”, and
then press
;.
Supply voltage
CH no.
Current
Max.
Signal strength
Signal strength
Channel strength
Current
Max.
Quality
1
2
3
3
E
Checking channel strength
Press
a/b to select “Channel strength”, and
then press
;.
You can input a specified frequency band using the 0_9
numeric buttons.
numeric buttons.
Channel strength of DVB-T
Supply voltage
CH no.
Current
Max.
Signal strength
MHz
Signal strength
Channel strength
Current
Max.
Quality
Channel strength of DVB-C
Supply voltage
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Channel strength
Current
Max.
Quality
Position and align the antenna so that
the maximum possible values for “Signal
strength” and “Quality” are obtained.
the maximum possible values for “Signal
strength” and “Quality” are obtained.
NOTE
The values of “Signal strength” and “Quality” indicate when to
check the appropriate alignment of the antenna.
check the appropriate alignment of the antenna.
E
•
4
•
Inserting the CA card into the CI module
In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the
CI slot of the TV.
CI slot of the TV.
Carefully insert the CI module in
the CI slot with the contact side
forward.
The logo on the CI module must
be facing outward from the rear
of the TV.
the CI slot with the contact side
forward.
The logo on the CI module must
be facing outward from the rear
of the TV.
1
2
Checking CI module information
Go to “MENU” > “Digital setup” > “CI menu”.
The content of this menu depends on the provider of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
Make sure that the CI module is properly inserted.
This menu is only available for digital stations.
This menu is only available for digital stations.
•
•
•
•
LC-LE700E_GB.indd 11
LC-LE700E_GB.indd 11
2009/07/13 14:51:26
2009/07/13 14:51:26
Click on the first or last page to see other LC-32LE700E (serv.man14) service manuals if exist.