Sharp LC-32LE700E (serv.man14) User Manual / Operation Manual ▷ View online
27
Channel settings
Auto installation
Setup
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
Press
c/d to select “Yes”, and then press
;.
Press
Press
a/b/c/d to select the desired
language, and then press
;.
NOTE
PIN input is required when executing “Auto installation”. The
default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
(Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN
THE PIN
(Page 46).
You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
The current country setting is displayed on the screen.
setting in “Auto installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
The current country setting is displayed on the screen.
Press
a/b to select the broadcast standard
you want to search, and then press
;.
Digital search
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting
on pages 9_10.
The “Digital search” has a “Reset” function. This function
allows you to reset all setting values.
allows you to reset all setting values.
Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting
receivable TV stations. Refer to Analogue
broadcast setting
on page 10.
1
2
•
•
•
3
E
•
E
Programme setup
Setup
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
automatically or manually.
Press
a/b to select the broadcast standard
you want to reconfigure, and then press
;.
NOTE
PIN input is required when executing “Programme setup”.
The default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
The default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings
(Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN
THE PIN
(Page 46).
Digital setting
Additional search
Use this menu to add new services automatically after
auto installation has been completed.
auto installation has been completed.
Manual search
Add new services within a specified frequency band.
Enter the frequency using 0_9 numeric buttons.
You can perform “Manual search” with a service number only
when the five Nordic countries have been selected in the
country setting.
You can perform “Manual search” with a service number only
when the five Nordic countries have been selected in the
country setting.
•
E
E
•
•
•
Basic adjustment
LC-LE700E_GB.indd 27
LC-LE700E_GB.indd 27
2009/07/13 14:51:37
2009/07/13 14:51:37
28
Basic adjustment
Manual adjust
Configure various settings for each service using the
colour (R/G/B) buttons.
colour (R/G/B) buttons.
Service no.
Lock
Service name
Lock
CH skip
Old LCN
CH skip
Sort
Press
a/b to select the desired service.
Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
unit corresponding with the item you want to
reconfigure.
The
✔ mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.
corresponding operation on/off.
Buttons for “Manual adjust” operation
Lock
Press R button.
When the service is locked, you must enter your
PIN whenever you tune to the service.
PIN whenever you tune to the service.
CH skip
Press G button.
Services with a
✔ mark are passed over when
pressing :r/s on the TV or remote control unit.
Sort
Press B button.
The item position of services can be sorted.
Press
a/b to select the service whose
item position you want to move, and then
press
press
;.
Press
a/b to move it to the desired
position, and then press
;.
Repeat steps 1 and 2 until all desired
service items are sorted.
service items are sorted.
1
2
3
E
1
2
2
•
Cable setting
Additional search
Use this menu to add new services automatically after
auto installation has been completed. Follow steps
auto installation has been completed. Follow steps
1 to
4 in Searching for cable broadcasts on page 10.
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, the TV
starts searching.
After setting the items on the following screen, the TV
starts searching.
Refer to the table about menu items in the right column
on page 10.
on page 10.
Frequency
Symbol rate
QAM modulation
Search start
MHz
Manual adjust
This function is the same as in “Digital setting”. Refer to
“Manual adjust” in “Digital setting”.
“Manual adjust” in “Digital setting”.
H
You can only reconfigure the “Manual adjust” settings.
You can only set the “Lock” setting in “Manual adjust”.
You can only set the “Lock” setting in “Manual adjust”.
E
E
•
E
•
•
•
LC-LE700E_GB.indd 28
LC-LE700E_GB.indd 28
2009/07/13 14:51:37
2009/07/13 14:51:37
29
Analogue setting
You can reconfigure the analogue TV channels settings
automatically or manually.
automatically or manually.
Additional search
Use this menu to add new channels automatically after
auto installation has been made.
auto installation has been made.
Start searching channels after selecting the colour system and
sound system.
sound system.
Manual adjust
Use this menu to set up analogue TV channels manually.
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
set and then press
a/b/c/d to select the channel you want to
set and then press
;.
Fine
You can adjust the frequency to the desired position.
NOTE
Adjust while checking the background picture as a reference.
Instead of pressing
Instead of pressing
c/d to adjust the frequency, you can set
by directly entering the frequency number of the channel with
0_9
0_9
numeric buttons.
EXAMPLE
179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
49.25 MHz: Press 4 > 9 > 2 > 5 >
49.25 MHz: Press 4 > 9 > 2 > 5 >
;.
Colour sys.
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”).
“PAL”, “SECAM”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the “Auto
installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Press
a/b/c/d to select each character of
the new name for the channel, and then press
;.
Repeat step 1 above until the name is fully
spelt out.
;.
Repeat step 1 above until the name is fully
spelt out.
NOTE
The name can be five characters or less.
If a channel name is less than five characters, select “END” to
set the channel name.
If a channel name is less than five characters, select “END” to
set the channel name.
E
•
E
•
•
•
•
•
•
1
2
•
•
•
Skip
Channels with “Skip” set to “On” are passed over when
using :r/s even if selected while watching the image
from the TV.
using :r/s even if selected while watching the image
from the TV.
Decoder
When connecting a decoder to the TV, you need to select
“EXT 1” or “EXT 2”.
“EXT 1” or “EXT 2”.
NOTE
The factory preset value is “Off”.
Lock
You can block the viewing of any channel.
NOTE
See “Child lock” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “Child lock” temporarily until the power is
turned off.
When “Lock” is set to “On” for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “Child lock” temporarily until the power is
turned off.
Sort
Channel positions can be sorted freely.
Press
c/d to select “Yes”, and then press
;.
Press
Press
a/b/c/d to select the channel you
want to move, and then press
;.
Press
a/b/c/d to move it to the desired
position, and then press
;.
Repeat steps 2 and 3 until all desired channels
are sorted.
are sorted.
Erase programme
Channels can be erased individually.
Press
c/d to select “Yes”, and then press
;.
Press
Press
a/b/c/d to select the channel you
want to erase, and then press
;.
A message window pops up.
Press
c/d to select “Yes”, and then press
; to erase the selected channel. All the
subsequent channels move up.
subsequent channels move up.
Repeat steps 2 and 3 until all desired channels
are erased.
are erased.
•
•
•
•
•
E
1
2
3
4
E
1
2
•
3
4
Basic adjustment
LC-LE700E_GB.indd 29
LC-LE700E_GB.indd 29
2009/07/13 14:51:38
2009/07/13 14:51:38
30
Password/Parental lock settings
Setup
Child lock
Allows you to use a PIN to protect certain settings from
being accidentally changed.
being accidentally changed.
NOTE
PIN input is required when executing “Child lock”. The default
PIN is “1234”. To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 46).
PIN is “1234”. To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 46).
Change PIN
Register a four-digit password number to use the “Child
lock” function.
lock” function.
Enter the four-digit number as a PIN using
0_9
0_9
numeric buttons.
Enter the same four-digit number as in step 1
to confirm.
to confirm.
“The system PIN has been changed successfully”
displays.
displays.
NOTE
To view a locked channel, you must enter the PIN (see pages
28 and 29 for locking channels from viewing in DTV and ATV
mode). When you select a locked channel, a PIN prompt
message pops up. Press 6 to display the PIN input window.
28 and 29 for locking channels from viewing in DTV and ATV
mode). When you select a locked channel, a PIN prompt
message pops up. Press 6 to display the PIN input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
As a precautionary measure, make a note of your PIN on
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
Parental rating
This function allows DTV services to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
prevents children from watching violent or sexual scenes
that may be harmful.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings
used exclusively in France.
Refer to page 48 for details about ratings.
used exclusively in France.
Refer to page 48 for details about ratings.
•
1
2
•
•
•
•
•
Other basic adjustments
Option
Key lock
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
or remote control unit in order to prohibit children from
changing the channel or volume.
Item
Off
Unlocks the buttons.
RC control lock
Locks all buttons on the remote control
unit.
unit.
Button control lock
Locks the buttons on the TV except the
power switch.
power switch.
NOTE
You cannot set both “RC control lock” and “Button
control lock” at the same time.
control lock” at the same time.
Cancelling the lock
Press @ on the TV and set to “Off” to cancel the
“RC control lock”. Press @ on the remote control
unit and set to “Off” to cancel the “Button control lock”.
“RC control lock”. Press @ on the remote control
unit and set to “Off” to cancel the “Button control lock”.
Refer to page 22 for menu operation using @ on the TV.
Setup
Quick start
You can reduce the TV’s start-up time after turning on the
power with the remote control unit.
power with the remote control unit.
Item
On
The TV quickly starts up from standby.
30 W or more of power consumption is
required during standby.
30 W or more of power consumption is
required during standby.
Off
Power consumption is small during
standby.
standby.
Setup
Blue illumination
The LED on the front of the TV is blue when illuminated.
NOTE
The factory default for this item is “On”. Set to “Off” if you do
not want the LED to illuminate.
not want the LED to illuminate.
E
•
•
Basic adjustment
LC-LE700E_GB.indd 30
LC-LE700E_GB.indd 30
2009/07/13 14:51:38
2009/07/13 14:51:38
Click on the first or last page to see other LC-32LE700E (serv.man14) service manuals if exist.