DOWNLOAD Sharp LC-32LE700E (serv.man14) Service Manual ↓ Size: 6.95 MB | Pages: 52 in PDF or view online for FREE

Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending 
on your TV installation and connection.

Connect an antenna cable to the 
antenna terminal (Page 8).

If necessary, insert a CA 
card into the CI slot to watch 
scrambled broadcasts (Page 11).

Connect the AC cord to the TV 
(Page 8).

Product shape varies in some 

countries.







Turn on (;) the MAIN POWER 
switch on the left side of the TV 
(Page 4).

Turn on the power using a on 
the TV (Page 12).

Run the initial auto installation 
(Page 9).

Language setting

Home/Store setting

HOME

STORE

Country setting

Austria

Finland

Greece

Channel search 
setting

Digital search

Analogue search







✔

✔

✔

✔

If necessary, adjust the antenna 
to attain maximum signal 
reception (Page 11).

Connect external devices 
such as a DVD player/
recorder as instructed (Pages 
16_18).

Connect external audio 
devices such as speakers/
amplifier as instructed (Page 
18).









LC-LE700E_GB.indd   7

LC-LE700E_GB.indd   7

2009/07/13   14:51:23

2009/07/13   14:51:23

2

*

1

Cable clamp (bundle the cables with the clamp)

Standard DIN45325 plug (IEC 169-2) 75 

q coaxial cable

Turn on (;) the MAIN POWER switch on the left side of the TV.

AC cord (product shape varies in some countries)

The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type 
causes unnecessary electrical wave emissions or interference.









*

Place the TV close to the AC outlet, 
and keep the power plug within 
reach.

You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting 
the antenna cable to the antenna terminal on the rear of the TV.

Press @ and the “MENU” screen displays.
Press 

c/d to select “Setup”.

Press 

a/b to select “Antenna setup-DIGITAL”, and then press ;.

Press 

a/b to select “Supply voltage”, and then press ;.

Press 

c/d to select “On”, and then press ;.

This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 45). 
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers 
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that 
results in accident or injury.
You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
Only for 40 inch models.

•

•

•
•
*

LC-LE700E_GB.indd   8

LC-LE700E_GB.indd   8

2009/07/13   14:51:25

2009/07/13   14:51:25

When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings one 
after another.

Is the antenna cable connected?
Is the AC cord plugged in?
Is the MAIN POWER switch turned on (;)?

E
E
E

Press a on the TV.

The initial auto installation wizard appears.

Setting the OSD language.

Press 

a/b/c/d to select the desired language, 

and then press 

;.

Selecting the location of the TV.

HOME

STORE

Press 

c/d to select where you will use this TV, 

and then press 

;.

HOME: “STANDARD” will be the default value for the “AV 
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for 
the “AV MODE” setting. If the “AV MODE” is changed, 
the TV will automatically switch back to “DYNAMIC 
(Fixed)” when there is no signal input from the TV or 
remote control unit for 30 minutes.
A demonstration image will be displayed after initial auto 
installation is completed. If you have chosen “STORE” by 
mistake, go to “Setup” > “Reset” > select “HOME” again.

Setting the country.

Austria

Finland

Greece

Press 

a/b/c/d to select your country or area, 

and then press 

;.

This setting screen only appears during the first 
installation.

•

•

•

•

•

If you set “Sweden” in the country setting, you can select 
the cable provider “ComHem”. Refer to the 

H mark 

in the following steps or instructions about the settings for 
“ComHem”.

Starting channel search.

Digital search

Analogue search

Press 

c/d to select “Digital search” or “Analogue 

search”, and then press 

;.

To watch both analogue broadcasts and digital 
broadcasts, you should perform the channel search 
setting for each format.
If you want to search for more broadcasts, execute 
“Additional search” from the “Programme setup” menu 
(Pages 27_29).

If you turn off the power on the TV while performing a channel 
search, the initial auto installation wizard will not appear. The 
auto installation function allows you to execute the installation 
again from the “Setup” menu (Page 27).
The initial auto installation wizard will abort if you leave the TV 
unattended for 30 minutes before searching for channels.
After initial auto installation is completed, the default PIN is 
automatically set to “1234”. To change the PIN setting, refer to 
Password/Parental lock settings

 (Page 30). To clear the PIN 

setting (PIN input will no longer be needed), refer to CLEARING 
THE PIN

 (Page 46).

When “Italy” is selected in the country setting, the default age 
restriction value is set to 18.

Press 

c/d to select “Terrestrial” or “Cable”, 

and then press 

;.

Terrestrial

Cable

H

When you set “Sweden” in the country setting and select 
“Cable” for the searching format, you can select the 
cable provider “ComHem”.

The TV searches for, sorts and stores all the 
receivable TV stations according to their 
settings and the connected antenna.

To abort the initial auto installation in progress, press 6.

•

•

•

•

•

•

•

•

E

•

LC-LE700E_GB.indd   9

LC-LE700E_GB.indd   9

2009/07/13   14:51:25

2009/07/13   14:51:25

To change each item to the appropriate 
settings:

Press 

a/b to select the menu, and then 

press 

;.

Scrambled stations

[Yes]

[Channel]

[None]

Search method

Start frequency

Network ID

Symbol rate 1

Symbol rate 2

QAM modulation 1

QAM modulation 2

Reset

Search start

Press 

a/b/c/d or 0_9 to select or input 

the appropriate item/value, and then press 
;.
Press 

a/b to select “Search start”, and then 

press 

;.

The TV searches for, sorts and stores all 
the receivable TV stations according to their 
settings and the connected antenna.

To abort the initial auto installation in progress, press 6.

H

The “Scrambled stations” menu and the “Search method” 
menu are not displayed on the screen as each menu item is 
fixed.
The value of “Start frequency” and “Network ID” should be set 
to the value specified by the cable provider.

E

1

2

3

4

•

•

•

Specifies if you 
need to add pay-TV 
services.

Yes, No

Specifies how you 
search channels.

Channel: Extracts all 
of information from a 
channel (quick, but 
needs corresponding 
TV stations).
Frequency: Checks 
every frequency in 
range (slow).

From 47.0_858.0 
MHz

Specifies the network. 
Set this to register 
only the specified 
network ID without 
registering any special 
services.

None, 0_65535

The symbol rates 
are specified by the 
cable provider. Input 
the value received for 
CATV.

1000_9000

The symbol rates 
are specified by the 
cable provider. Input 
the value received for 
CATV.

1000_9000

16, 32, 64, 128, 256

None, 16, 32, 64, 
128, 256

Set up “Symbol rate 2” if the cable provider uses several 
symbol rates.

H

When you set “Sweden” in the country setting and select 
“Cable” for the searching format, you can select the cable 
provider “ComHem”. Follow the screen prompts.

The TV searches for, sorts and stores all the 
receivable TV stations according to their 
settings and the connected antenna.

To abort the initial auto installation in progress, press 6.

*

•

•

LC-LE700E_GB.indd   10

LC-LE700E_GB.indd   10

2009/07/13   14:51:26

2009/07/13   14:51:26