DOWNLOAD Sharp LC-32LE700E (serv.man14) Service Manual ↓ Size: 6.95 MB | Pages: 52 in PDF or view online for FREE

Picture

OPC

[Off]

Backlight

Contrast

Brightness

Colour

Tint

Sharpness

Advanced

Reset

DYNAMIC

Automatically adjusts the brightness of the screen.

Displays the OPC effect on the screen 
while adjusting the brightness of the 
screen.

Automatically adjusts.

The brightness is fixed at the value set 
in “Backlight”.

When set to “On”, the TV senses the surrounding light and 
automatically adjusts the backlight brightness. Make sure no 
object obstructs the OPC sensor, which could affect its ability 
to sense surrounding light.

Adjusts the picture to your preference with the following 
picture settings.

c (Cursor)

d (Cursor)

The screen dims

The screen brightens

For less contrast

For more contrast

For less brightness

For more brightness

For less colour 
intensity

For more colour 
intensity

Skin tones become 
purplish

Skin tones become 
greenish

For less sharpness

For more sharpness

•

This TV provides various advanced functions for 
optimising the picture quality.

C.M.S.-hue

Colour temp.

C.M.S.-saturation

C.M.S.-value

100 Hz

Gamma adjustment

Film mode

Active contrast

DNR

3D-Y/C

Monochrome

Range of OPC

R

Y

G

C

B

M

This function adjusts the hue of a selected colour using a 
six-colour adjustment system.

This function increases or decreases the saturation of a 
selected colour using a six-colour adjustment system.

This function adjusts the brightness of a selected colour 
using a six-colour adjustment system.

Adjusts the colour temperature to give the best white 
image.

White with bluish tone.

Intermediate tone between “High” and 
“Middle”.

Natural tone.

Intermediate tone between “Middle” 
and “Low”.

White with reddish tone.

Adjusts the white balance by changing 
the value of each item.

LC-LE700E_GB.indd   23

LC-LE700E_GB.indd   23

2009/07/13   14:51:34

2009/07/13   14:51:34

“100 Hz” technology provides superior solutions for 
digital display picture quality removing motion blur.

This effect is greater on fast moving images.
“100 Hz” will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
If images appear blurred, set the “100 Hz” to “Off”.

Automatically detects a film-based source (originally 
encoded at 24 or 25 frames per second, depending on 
the vertical frequency), analyses it and then recreates 
each still film frame for high-definition picture quality 
(“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).

Automatically adjusts the contrast of an image according 
to the scene.

Selects the tone difference of the brightness and 
darkness of the image according to the type of 
programme watched from a maximum of 

e 2 to a 

minimum of 

f 2.

“DNR” produces a clearer image (“Off”, “High”, “Middle”, 
“Low”, “Auto”).

This function may not be available depending on the input 
signal type.

Provides high quality images with minimal dot crawl and 
cross colour noise by detecting changes in the image.

Normal adjustment.

Sets the optimum image quality for fast-
moving images.

Sets the optimum image quality for 
slow-moving images.

“3D-Y/C” may not operate depending on the input signal type 
or when the input signal is noisy.
“3D-Y/C” has even more effect on composite video signals 
(CVBS).

For viewing a video in black & white.

•
•

•

•

•

•

The brightness level range of the OPC sensor’s automatic 
adjustments can be set according to your preferences. 
The adjustment range of the OPC sensor can be set to a 
maximum of 

e 16 and a minimum of f 16.

This function is available only when the “OPC” setting is set to 
“On” or “On:Display”.
The maximum setting cannot be set to a smaller number than 
the minimum setting.
The minimum setting cannot be set to a bigger number than 
the maximum setting.
The maximum and minimum settings cannot be set to the 
same number.
Depending on the brightness of the surrounding light, the OPC 
sensor might not operate if the adjustment range is small.

“AV MODE” gives you several viewing options to choose 
from to best match the system environment, which 
can vary due to factors like room-brightness, type of 
programme watched or the type of image input from 
external equipment.

Press 

#.

Each time you press 

#, the mode 

changes.

You can also switch the mode on the “Picture” and 
“Audio” menu screen by pressing 

#.

For a highly defined image in a normally 
bright room.

For viewing a movie in a darkened room.

For playing of video games.

For PC.

Allows you to customise settings as 
desired. You can set the mode for each 
input source.

For a clear-cut image emphasising 
high contrast for sports viewing (the 
“Picture” and “Audio” settings cannot 
be adjusted).

For a clear-cut image emphasising high 
contrast for sports viewing.

The TV automatically sets the 
appropriate selection from the “AV 
MODE” menu depending on the lighting 
conditions and the type of programme 
watched.

The item marked with * is available only when selecting “HDMI 
1”, “HDMI 2”, “HDMI 3”, “HDMI 4” or “EXT 4” from the “INPUT 
SOURCE” menu.
If you select “AUTO”, some selections in the “AV MODE” menu 
may not be automatically set.

•

•

•

•

•

•

•

•

LC-LE700E_GB.indd   24

LC-LE700E_GB.indd   24

2009/07/13   14:51:34

2009/07/13   14:51:34

Audio

Treble

[Off]

Bass

Balance

Surround

Bass enhancer

Reset

DYNAMIC

L30

R30

You can adjust the sound quality to your preference with 
the following settings.

c (Cursor)

d (Cursor)

For weaker treble

For stronger treble

For weaker bass

For stronger bass

Decrease audio from 
the right speaker

Decrease audio from 
the left speaker

This function allows you to enjoy realistic live sound.

This function allows you to enjoy bass-enhanced sound.

Different sound sources sometimes do not have the 
same volume level, such as a programme and its 
commercial breaks. This function reduces this problem 
by equalizing levels.

This function emphasises speech against background 
noise for greater clarity.

When listening to music from a music programme, you 
can set the TV off and enjoy audio only.

Both screen images and audio are 
output.

Audio is output without a screen image.

When using the EXT 4 terminal or HDMI 2 terminal, you 
must select which terminal uses the AUDIO (R/L) jack for 
analogue audio input.

When connecting devices (including a 
PC) with DVI/HDMI cable to the HDMI 
2 terminal and inputting analogue audio 
signals from the AUDIO (R/L) jack.

When connecting a PC to the EXT 4 
terminal, and inputting analogue audio 
signals from the AUDIO (R/L) jack.

You must set this to “EXT 4 (RGB)” when connecting devices 
(including a PC) with an HDMI-certified cable to the HDMI 2 
terminal. If “HDMI 2” is set, there will be no sound output.

•

LC-LE700E_GB.indd   25

LC-LE700E_GB.indd   25

2009/07/13   14:51:35

2009/07/13   14:51:35

ECO

Energy save

[     Standard]

ECO picture control

[On]

No signal off

[Disable]

No operation off

Sleep timer

[Disable]

This function automatically detects the image source and 
decreases the power consumption while keeping the 
brightness of the image unchanged.

This function does not work when “AV MODE” is set to 
“DYNAMIC (Fixed)” or “AUTO”.
This function does not work when “Energy save” is set to 
“Standard” or “Advanced”.

This function enables you to reduce the backlight 
brightness in order to decrease the power consumption 
and increase the backlight life span as shown in the 
following table.

Reduces the backlight brightness.

Reduces the backlight brightness more 
than “Standard”.

The backlight brightness is the same 
value of your settings in the selected 
“AV MODE”.

This function does not work when “AV MODE” is set to 
“DYNAMIC (Fixed)”.

“Energy save” is set to “Standard”.

“Energy save” is set to “Advanced”.

When “Energy save” is set to “Standard” or “Advanced”, 
“Energy save” status icons appear in the “Picture” menu 
and channel information windows as shown below.

•

•

•

E

Picture

OPC

[Off]

Backlight

Contrast

DYNAMIC

When “OPC” is set to “On” or “On:Display”, an “Energy save” 
status icon appears to the left of “OPC” in the “Picture” menu.
When “OPC” is set to “Off”, an “Energy save” status icon 
appears to the left of “Backlight” in the “Picture” menu.

STEREO

Subtitle
New information

When set to “Enable”, the TV will automatically enter 
standby mode if there is no signal input for 15 minutes.

Even if a TV programme finishes, this function may not operate 
because of interference from other TV stations or other signals.

The TV will automatically enter standby mode if no 
operations are performed during the time span you set 
(“30 min.” or “3 hr.”).

Five minutes before the TV enters standby mode, the remaining 
time displays every minute.

Allows you to set a time when the TV automatically 
enters standby mode.

Select “Off” to cancel the sleep timer.
When the time has been set, countdown automatically starts.
Five minutes before the preset of time expires, the remaining 
time displays each minute.

•

•

•

•

•
•
•

LC-LE700E_GB.indd   26

LC-LE700E_GB.indd   26

2009/07/13   14:51:36

2009/07/13   14:51:36