DOWNLOAD Sharp LC-32GD7E (serv.man5) Service Manual ↓ Size: 5.03 MB | Pages: 42 in PDF or view online for FREE

27

 

You can only receive radio programmes via DVB. 

Use the RADIO button on the remote control to switch

the radio mode on or off.

RADIO

Scan stations

Radio:       16 Antenne

Previous station
Change sorting

Switch to ...
Select station

...

Numerical

1
2
3
4
5

6

7
8

AUDIO IN
AVS
AV2
AV1

B5 AKTL

BAYERN 1
BR4 KLSK
SUNSHINE
ROCK ANT

ANTENNE

DLR
DLF

9

10
11
12
13
14
15
16
17
18
19
20

HR-INFO
MDR INFO
MDR FIGA
NDR KULT
SWR1
SWR2
WDR3
WDR5
OESTER 1
MDR JUMP
JAZZ RAD
BLUSAT20

END

BACK

MENU

D

D

D

D

D

D

D

D

D

D

D

D

D

D

D

D

D

9

0

Screen off

You see a station table of the radio stations. You can switch off the 

screen with the red button. The mode indicator on the TV lights orange. 

You can switch the screen display on again with the

red or blue buttons, or with RADIO, OK or END on the remote control.

Station switching with dark screen: with 

P∧ / P∨

 on the

remote control or with the numeric buttons.

You can play the radio stations for a few seconds from the selected entry 

upwards using the green button “Scan stations”. Pressing the green 

button again stops the play.

The Sound menu can be called with the button SOUND in radio mode 

(in DVB-T mode in UK the buttons may be differently assigned by the 

provider). 

Call Radio menu.

Radio menu

Sound

Stations     Timer functions

Treble

Bass
more ...

0

0

In the Radio menu, as in TV mode, you can set the sound, search for ra-

dio stations and store them (automatically or manually - not with DVB-T 

mode in UK), delete stations from the list, resort them or change names 

and set switching off/alarm functions. 

For the DVB radio programmes you can also use the programme guide 

when the currently active station supplies data (not with DVB-T stations 

in UK).

28

 

If the station provider offers DVB subtitles, you can have these displayed 

permanently or suppress the display. You can also choose between 

“Translation” or subtitles for the persons with hearing impediments.

Call the “TV menu” with the MENU button.
Select “Setup” and confi rm with OK.
Select “Miscellaneous” and confi rm with OK.
Select “DVB subtitles” and confi rm with OK.

TV menu -> Setup -> DVB subtitles

Subtitels off

for impaired hearing
for translation

If you select “Subtitles off” the subtitles are disabled and only a display 

appears in the status display if subtitles are present.

You can show the subtitles again with the END and then with the 

TEXT button.

Call the status bar by pressing the END and then the TEXT button if 

this is not already displayed. 

Press the TEXT button if the status bar is visible.

Select the language and confi rm with OK. The default changes for the 

current programme. 

The selectable subtitle languages depend on the programme provider.

The automatic pre-selection is determined by the menu language and 

the selection in the “DVB-Subtitle” setup menu.

Hide the menu by pressing the END button.

1.
2.
3.
4.

•

•

•

•

•

Switch off your TV set by pulling the main power plug out of the main 

power wall outlet.
Remove the cover on the upper back side of the TV set.
Press in the eject button on the slide-in module, the module jumps 

out.
Pull the module out of the set.

After plugging a new CI module and switching on the TV set, the follow-

ing dialogue box appears:

Autom. station search

Your TV set has detected a new CI module. This requires a station search 
for all new receivable stations.

After pressing the OK button, the wizard for the automatic station search 

is started. Please check the suggested search parameters there. 

Continue with the section “New station search” on page 13.

Here you can call information about the plugged Common-Interface 

module and Smartcard. To do this, call the TV menu, select the “Setup”, 

select “Miscellaneous” and press OK. Then select the item “CI-Module I 

– xxx”.

The content of this menu depends on the respective CI module provider.
Note: This menu is only available with digital programmes.

1.

2.
3.

4.

29

 

To ensure that your satellite receiver is always up-to-date and state-of-

the-art, new software versions will be provided from time to time which 

can be beamed directly to your device via satellite and can be installed 

automatically (available only via ASTRA1).  

Your device can fi nd out when new software versions are available. This 

happens at night, when your EPG is automatically updated.  To enable 

this update to take place, your TV set simply needs to remain in standby 

mode.

If a new software version has been found, an on-screen message will 

inform you accordingly next time you switch the TV on:

You can decide whether you wish to download the new software or not. 

Confi rm with OK to start the download and install process for the new 

software, which will be transmitted by satellite. 

You can fi nd out more in the section “Downloading the software”.

If you want to carry out a manual search for an update software, proceed 

as follows:

Press the MENU button to call up the TV menu.
Confi rm the line marked “Setup” with OK.
Confi rm the line marked “Miscellaneous” with OK.
Select the entry marked “DVB software” and press OK.

TV menu -> Setup -> Update digital TV software

Current Version: V3.0.0

You can search for a new software version with OK

If you start the search with OK, a check is performed to see if a new 

software version is available.
If a new version is available, an on-screen message will appear.

TV menu -> Setup -> Update digital TV software

Current Version: V3.0.0

New Version: V3.1.0

1.
2.
3.
4.

5.

6.

If you now press OK in the dialog box shown above, you can decide 

whether you want to download the software straight away, or when 

you switch the TV off, or not at all.

We recommend that you always update your digital software. This is 

the only way to ensure that your device is always up to date.
If you have chosen to download the software, the software on your 

device will be confi gured and you will be informed of the download’s 

progress by a grey bar and a counter.

pear informing you that the download process is completed.
Once you have updated the software, you will be prompted to turn off 

your TV set with the ON/Standby switch and turn it back on again.

If you did not download the update, you will be asked again when you 

switch the TV on whether you wish to continue with the update process.

1.

2.

3.

30

 

You have logged in and connected all connected equipment in the initial 

start-up. If you want to connect other equipment or disconnect equip-

ment, call the connection wizard.

Call up the TV menu

Select “Connections”

Select “New devices/modifi cations” and 

call up with OK.

State what equipment you want to connect. The connection wizard then 

shows you which sockets you should connect this equipment to. Then 

connect the equipment to these sockets.

In addition to the connection via the Euro-AV sockets you also have to 

connect the antenna (only for terrrestrial antenna or cable systems) 

through the VCR/DVD recorder to the TV set. The antenna signal is then 

available to the VCR/DVD recorder and the TV set.

Note: Use Euro AV cables with right-angled plugs as shown.

ENTREE

ANTENNE

EURO AV2
DECODER

EURO AV1

AUDIO/

VIDEO

SORTIE

ANTENNE

AERIAL

RF OUT

SORTIE

G

L

D

R

OUT

AUDIO

Switch on the test station on the VCR or insert a recorded tape and start 

playback. In some video recorders the station must be switched on by 

activating the modulator.

Then call the AV selection on the TV set with 

 or with button 0. Select 

the menu item “VIDEO” in the AV selection and call with OK.

To prevent “normal” TV stations being found in the search, pull out the 

antenna plug from the antenna input of the VCR temporarily (the cable to 

the antenna system).

If you cannot see the test station or playback from the cassette, the VCR 

is transmitting on a different station. You then have to search for the 

station or set it manually.

Call the TV menu with the MENU button.
Select “Setup” with 

.

Select “Stations” with   and press OK.
Select “Manual tune” with   and  press OK.
Enter station “E30” under the “Channel” item (UHF range, select in this 

menu above if necessary).
Start search with the blue button.
If the station has been found, enter the name “VIDEO”, confi rm with 

OK and save with the red button.
A list of the stored stations is displayed
Select AV here and overwrite this programme place with the red but-

ton.
  Hide the menu with the END button.

Reconnect the antenna plug back in. 

If you now get interference because a TV station is transmitting on the 

same channel as the VCR station, you have to change the transmitting 

station on the VCR and repeat the steps 1 ... 10.

1.
2.
3.
4.
5.

6.
7.

8.
9.

10.