Sharp LC-32GD7E (serv.man5) User Manual / Operation Manual ▷ View online
15
Changing stations
with the P∧ / P∨ buttons on the remote control
Station up/down
with the numeric buttons of the remote control
The TV set has a dynamic memory. If up to 9 stations are stored, you
only need to enter one digit, up to 99 two digits, up to 999 three digits
and above 999 four digits (please look in the station table to see how
many stations have been stored).
1 digit stations
Press buttons 0 – 9 for one second, and the station
changes instantly.
Or press button 0 – 9 briefl y, the station then changes
after 2 seconds (the station changes immediately when
only 9 stations are stored).
2 digit stations
After briefl y pressing the fi rst numeric button keep the
second numeric button pressed for one second, the sta-
tion then changes immediately.
Or press both numeric buttons briefl y, the station then
changes after 2 seconds (the station changes immedi-
ately when only 99 stations are stored).
3 digit stations
After briefl y pressing the fi rst and second numeric button
keep the third numeric button pressed for one second,
the station then changes immediately.
Or press the three numeric buttons briefl y, the station
then changes after 2 seconds (the station changes im-
mediately when only 999 stations are stored).
4 digit stations
Press the four numeric buttons briefl y, the station then
changes immediately..
Switch on/off
Your TV is equipped with an eco-standby power supply unit. On standby
the power consumption drops to low power (see page 36). Weak electric
power is still consumed even if the the unit is switched off by the ON/
OFF switch.
Attention: If you want to switch the TV set completely off you have to
Attention: If you want to switch the TV set completely off you have to
pull the plug of the mains power cable off the mains power socket.
However bear in mind that in both cases EPG data will be lost and pro-
However bear in mind that in both cases EPG data will be lost and pro-
grammed timer recordings will not be performed by the TV.
Switching off
If the TV set is switched on (Mode indicator lights
green), you can switch it to standby using the red ON/
OFF button of the remote control.
The mode indicator on the TV set lights red. If the mode
indicator lights orange, a timed recording is made, EPG
data is entered or radio operation without screen display
is active.
Switching on the TV set
From standby it is best to switch back on with the red
ON/OFF button or with the numeric buttons (0 – 9) of
the remote control.
Or switch on the TV set with OK, you can see the station
table and select a station.
RADIO
Switching the Radio function on *
Radio mode is only possible if the TV set is equipped for
DVB-T/S reception or an external radio receiver is con-
nected to the AV connections EXT 1, EXT2 .
If you switch off the TV set with the ON/OFF button
on the top of the set to standby, the mode indicator on
the TV set is no longer lit.
The unit then cannot be switched on by the remote
control.
Daily operation
16
via the station list
Call the station list with OK
MENU
Station list
Change stations
Change sorting
Change sorting
Switch to ...
Select station
Select station
...
Numerical
0
1
2
3
4
5
1
2
3
4
5
COMP.IN
HDMI/DVI
VGA
AVS
AV2
AV1
VIDEO
ARD
ZDF
SAT.1
RTL
VOX
HDMI/DVI
VGA
AVS
AV2
AV1
VIDEO
ARD
ZDF
SAT.1
RTL
VOX
6
7
8
9
7
8
9
10
11
12
13
14
15
16
17
11
12
13
14
15
16
17
S-RTL
N-TV
DSF
9LIFE
PRO7
RTL2
KABEL 1
WDR KLN
BR
SW-BW
SW-RP
SW-SL
N-TV
DSF
9LIFE
PRO7
RTL2
KABEL 1
WDR KLN
BR
SW-BW
SW-RP
SW-SL
END
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
9
0
OK
OK
Select station (if broadcast, the selected station is dis-
played in the PIP picture)
or
select with numeric buttons
call selected station with OK
blue button: sort alphabetically/according to bouquets/
numerically
MENU
Station list
Change stations
Change sorting
Change sorting
Switch to ...
Select letter
Select letter
...
Alphabetical
COMP.IN
HDMI/DVI
VGA
AVS
AV2
AV1
HDMI/DVI
VGA
AVS
AV2
AV1
1-2-3.TV
24.CZ
2M MAROC
3SAT
9LIVE
24.CZ
2M MAROC
3SAT
9LIVE
AMENA
ANDALUC
ARD
ARTE
BAHN TV
BBC WORL
BR
CNBC
CNN
DSF
EINS MUX
EUROSPORT
ANDALUC
ARD
ARTE
BAHN TV
BBC WORL
BR
CNBC
CNN
DSF
EINS MUX
EUROSPORT
END
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
z
a
OK
OK
In case of alphabetical display: Enter letter (as on a mobile phone key-
pad), select with
and call with OK.
For bouquet display (only for devices with DVB; not with DVB-T stations
in UK): Enter bouquet number, select with
and call with OK.
Digital stations are marked by
D
Coded stations are marked by
Child-protected stations are marked by
Calling up audio/video stations - AV selection
for playing AV equipment push the AV button (see also
from page 30 onwards).
External sources
VIDEO
EXT 1
EXT 2
EXT 3
EXT 4
EXT 5
PC IN
EXT 2
EXT 3
EXT 4
EXT 5
PC IN
Select AV socket with
(or VIDEO if the video
recorder has been connected via the antenna socket) and
press OK.
Adjusting the sound
Volume and other frequently used sound settings
Setting the volume
more ...
Volume
6
you can have other sound settings displayed with
Loudness
Sound effects
Sound effects
Sound adjust
Volume
on
Stereo
Stereo
normal Pop Classical
Speech
6
and set with
Sound off/on
Sound off
Sound off
Sound on: Press button again or adjust volume.
Sound on
Other sound settings:
Call the Sound menu
Sound
Treble
Bass
more ...
more ...
0
0
Daily operation
17
select the sound function to be set with
Sound
Treble
Bass
more ...
0
0
and select/set with
.
Sound setup: Treble and bass. Under “more ” you will fi nd the sound
selection for loudspeaker sound, volume automatic, volume and sound
of the headphones, AV output sound, max. volume and balance. Different
menu items are displayed depending on the selected station and the con-
nected audio device.
Setting the picture
Open the Picture menu.
Picture
Picture adjustment
Contrast
Colour
Sharpness
more ...
Colour
Sharpness
more ...
intensive
normal
soft
10
10
3
10
3
select the picture function to be set with
Picture
Picture adjustment
Contrast
Contrast
Colour
Sharpness
more ...
more ...
normal
10
10
10
3
and select/set with
.
Picture settings: Picture adjustment, contrast, colour, sharpness Under
“more” you will fi nd brightness, wide mode, move picture up/down, Auto
format and Movie mode (DMM).
Operation on the TV set
Switching station on the TV set
For station down press
∨.
For station up press
∧.
∨ P ∧
Changing volume, brightness, contrast, or wide mode
Press the MENU function button briefl y.
MENU
Direct control on TV set
Operating mode
Brightness
Contrast
Wide modes
Service
Contrast
Wide modes
Service
TV
Radio
7
1
1
0
Panorama
Select the function to be set with the
P∧ / P∨
button
e.g. contrast.
∨ P ∧
Direct control on TV set
Operating mode
Brightness
Brightness
Contrast
Wide modes
Service
Service
TV
7
7
10
Panorama
Press the MENU function button briefl y.
MENU
Set volume with
– or +.
- +
Daily operation
18
TV mode
In initial installation and daily operation, the TV set is in TV mode. This is
also the case when none of the other modes of operation such as EPG,
Teletext, PIP or Radio has been selected.
Each of these modes of operation has a menu, which you can call with
the MENU button and with some colour button assignments.
Functioning of the colour buttons in TV mode
red: the TV picture freezes. Pressing this button again
starts the picture moving again.
green: select other functions such as teletext subtitles ,
headphones volume and move picture up/down.
Teletext subtitles
Headphone volume
Move picture up/down
Move picture up/down
With normal size
With double size
Additional functions
yellow: Call last viewed channel. You can switch back
and forth quickly between two channels with this button.
blue: call station info.
Programme info
13:51
Detailed info
Programme preview Cannel preview (te
Deatiled info (teletext)
Personal values and factory values
call personal settings/factory settings for picture and
sound, save picture and sound settings as personal
settings.
AV mode
Standard
Film
Dynamic
Game
Film
Dynamic
Game
User
Status display
When you change channel or press END a status display appears for a
few seconds.
Show/hide status.
END
2 ZDF
Heute
13:51
23:00
23:00
19:00 - 19:20 Mono
Sleep timer
Language/sound selection
In the top line you can see the name of the programme. Further display
options which can be selected in the “TV menu – Setup – Miscellaneous
– On-screen displays” are shown below it (time, language/sound selec-
tion, switch-off time etc.).
Additional selection options for the status display can be provided by
the station provider for the programme. In this case, the corresponding
colour button or the TEXT button will be displayed:
red: Channel selection for multi-channel providers.
green: select Language/Sound.
yellow: select Time.
blue: select Child protection.
TEXT: select DVB subtitles.
If you press the colour button or the TEXT button while the status display
is shown, the appropriate selection menu is displayed.
The subtitles of the status display refer exclusively to the “DVD subtitles”
and are not offered by all station providers.
Which options you see depends on the respective programme provider
(Many programme providers broadcast subtitles by teletext).
The status bar is displayed automatically when you change channels or
when a new programme with different options to the previous pro-
gramme begins.
Notes:
Notes:
In the sound identifi cation, “Mono!” means that you have switched
manually from stereo to mono for example.
Selection menus are only available as long as the status bar is dis-
played. However, you can call it again at any time by pressing the END
button on your remote control.
Some of the obove mentionend features do not work with DVB-T sta-
tions in UK.
•
•
•
Modes of operation
Click on the first or last page to see other LC-32GD7E (serv.man5) service manuals if exist.