Sharp LC-32GD7E (serv.man5) User Manual / Operation Manual ▷ View online
11
In the sound settings select e.g. “Treble” with
(for
increasing or reducing the treble tones).
If you want to make other sound settings, move down
with ... .
TV menu
Sound
Treble
Bass
Bass
more ...
0
0
0
Recording Connections Setup Picture
... and select “more” with OK
TV menu
Sound
Treble
Bass
Loudspeaker sound
Headphone volume
Headphone sound
Auto volume
AV audio signal
Bass
Loudspeaker sound
Headphone volume
Headphone sound
Auto volume
AV audio signal
Maximum volume
Balance
0
0
Stereo
42
Stereo
on
Sound 1
0
Stereo
42
Stereo
on
Sound 1
61
0
BACK
INFO
END
Recording Connections Setup Picture
... mark the selection for “Maximum Volume” with .
Set “Maximum Volume” with
.
Press repeatedly the BACK button to return to the last
menus.
BACK
Press the END button to hide the menu.
END
Other menus can be opened in TV mode as follows apart from the TV
menu shown here:
Call the Sound menu directly.
Call the Picture menu directly.
Call personal/factory values.
Call the picture format selection directly.
Green button: Quick calls for teletext subtitles and head-
phones volume.
Blue button: Here you get programme information and a
preview via teletext and/or EPG.
Automatic station programming
The TV’s automatic station programming is started after switching on for
the fi rst time.
Follow the menus and make the necessary settings one after another.
By pressing the
buttons you select the setting
...
... and confi rm with OK. You then go to the next menu.
First you have to select the menu language e.g. “English” with the
remote control.
Pressing the OK button takes you to the menu “Connect antenna(s)”.
Pressing the OK button takes you to the menu “Connect antenna(s)”.
If you wish to receive digital stations via satellite, select “Satellite DVB-
S” and confi rm with the yellow button.
If you wish to receive digital terrestrial stations (DVB-T), select “An-
tenna DVB-T”.
Also select “Antenna/Cable (analog) yes”, which allows you to search
for and store conventional analogue stations.
You go to the “Location of set” menu by pressing the OK key.
You go to the “Location of set” menu by pressing the OK key.
State in what country you are operating your TV.
If you have selected DVB-T, pressing the OK button will take you to the
If you have selected DVB-T, pressing the OK button will take you to the
menu “Antenna DVB-T”.
You can make the selection corresponding to your satellite antenna
You can make the selection corresponding to your satellite antenna
system in the menu “Select satellite system”.
Ask your antenna technician or dealer about the type of satellite antenna
system and the antenna settings if necessary.
Select the satellite at which the antenna is aimed, e.g. ASTRA 1.
If you receive only one satellite...
In the following menu enter whether the station search is to take place
1.
2.
3.
4.
5.
6.
7.
First installation
12
in the high and low band (Yes) or only in the low band (No).
Note: A station search is necessary in both bands with most satellites.
The standard frequencies 9750 MHz and 10600 MHz are entered for
The standard frequencies 9750 MHz and 10600 MHz are entered for
the low-band and high-band.
If your satellite antenna is fi tted with an LNC (LNB) with a different
oscillator frequency, enter the corresponding frequency for high and
low band respectively.
Note: The correct display for the reception frequencies in the menu
“Set station manually” depends on this setting!
You should see a picture and hear the sound with the settings previ-
You should see a picture and hear the sound with the settings previ-
ously carried out (only for ASTRA 1 and HOTBIRD). Now press OK.
You can select the default pre-programming in the menu “Pre-pro-
You can select the default pre-programming in the menu “Pre-pro-
gramming” for fast programming of the satellite stations.
Please select “No” to ensure that all stations currently receivable are
searched for and saved.
Symbol rates: The standard symbol rates 22000 and 27500 are
entered.
If you wish to receive stations with other symbol rates, please enter
the corresponding values here using the number buttons of the remote
control.
With OK you get an overview of which settings are to be used for
With OK you get an overview of which settings are to be used for
automatic programming.
Press the OK key again, the station search starts.
Press the OK key again, the station search starts.
The TV searches for, sorts and stores all the receivable TV stations
according to their settings and the connected antenna.
When the TV stations are stored, you get a message.
When the TV stations are stored, you get a message.
Radio stations are then searched for with OK .
After storing the radio stations you get the “Connections” menu by
After storing the radio stations you get the “Connections” menu by
pressing the OK key.
Select “Yes” if you want to connect/log in a VCR, DVD player etc..
Follow the “Connection wizard” and connect the equipment to the TV
set according to the connection diagram. The menu is hidden if you
select “no”.
Note: You can repeat the initial start-up at any time, e.g. after moving.
The “Repeat initial start-up” function deletes any stations already stored!
Press the INFO key.
Then select the item “Repeat initial installation”.
Then select “Repeat initial start-up” and press OK.
Then select the item “Repeat initial installation”.
Then select “Repeat initial start-up” and press OK.
8.
9.
10.
11.
12.
13.
14.
1.
2.
3.
2.
3.
Station sorting
You can later change the station sorting performed automatically when-
ever and however you wish, see “TV menu – Setup – Stations – Change
stations” (not with DVB-T stations in UK).
DVB-T antenna position
If you receive one or more digital terrestrial stations (DVB-T) with picture
and sound interference using your room antenna, you should change the
location of the antenna (not with DVB-T stations in UK).
For optimum alignment or determination of the suitable installation
location of the antenna your TV set has an indicator for the signal quality
(“C/N”) and signal strength Level.
Ask your dealer on which channels and frequency bands (VHF or UHF)
digital TV stations are broadcast in your area.
Several digital stations are transmitted on one channel.
Choosing a TV channel
Call the “TV menu” with the MENU button.
Select the “Setup” line and confi rm with OK.
Select the “Stations” line and confi rm with OK.
Select the “Setup” line and confi rm with OK.
Select the “Stations” line and confi rm with OK.
TV menu
Picture
Sound
Recording
Connections
Setup
Stations
Parental lock
Timer functions
Language
Miscellaneous
Timer functions
Language
Miscellaneous
Select “Manual tune” and confi rm with OK.
TV menu -> Setup -> Stations
Manual tune
Change stations
Search wizard
Search
Signal source
Channel
Frequency
Name
Bandwidth
C/N 40
Frequency
Name
Bandwidth
C/N 40
Antenna/cable (analogue)
DVB-T
DVB-S
E08
196.25 MHz
ARD
7 MHz
Level 73
196.25 MHz
ARD
7 MHz
Level 73
END
TEXT
BACK
INFO
9
OK
Store
For digital stations select
“Signal source – DVB-T”.
1.
2.
3.
2.
3.
4.
5.
First installation
13
Enter the appropriate channel number with the numeric buttons.
The corresponding bandwidth 7 or 8 MHz is set depending on the
channel and country.
Notes:
You should only adapt the bandwidth if the channel spacing of the
stations in your area deviate from the standard.
If you receive a digital station, the signal quality (“C/N”) and the
signal strength level is displayed by a black bar/numeric value.
The antenna alignment or position is at an optimum when as high
a value as possible (large bar) is displayed for the signal quality
and signal strength.
Align the antenna to a maximum numeric value/bar.
If no signal is found in the set channel, you can start the frequency
search within the selected band (VHF or UHF) by pressing the blue
button.
The manual setup does not work with DVB-T stations in UK.
Check other channels on which digital stations are broadcast terrestri-
ally in your area one after another.
Align the antenna using the weakest station to as maximum as possib-
le a bar/numeric value.
Note: After the antenna has been positioned and aligned, we recommend
the “Automatic station programming” function to search for all stations
(see page 11).
New station search
This function is of particular advantage if you are only searching for new
stations.
Switch on your TV and if no menu is displayed, call the “TV-menu” by
pressing the MENU button on the remote control
Select the ”Setup” item and confi rm with OK.
Select the ”Setup” item and confi rm with OK.
Note:
If you use an active terrestrial antenna, this requires a supply voltage
(5 Volt). See page 9 under "Antenna".
Select “Stations” and confi rm with OK.
Select “Search wizard” and confi rm with OK.
Select “Stations” and confi rm with OK.
Select “Search wizard” and confi rm with OK.
You will get a table for the automatic station search.
If required select “Change search settings” and confi rm with OK. Fol-
If required select “Change search settings” and confi rm with OK. Fol-
low the menus. Otherwise continue with step 10.
Initial installation -> Connect antenna(s) for
Antenna/cable (analogue)
Antenna DVB-T
Satellite DVB-S
Satellite DVB-S
(to ANT TV)
(at ANT TV)
(at ANT SAT)
(at ANT SAT)
✓
6.
•
•
•
•
•
•
7.
1.
2.
3.
4.
4.
5.
Select your location and then indicate whether you are searching via
antenna/cable (analog), antenna DVB-T or in the satellite range (DVB-
S) by marking the appropriate selection with the yellow button.
In DVB-T you can select a channel search (fast station search) or a
frequency search.
Indicate whether you wish to have all stations or only new ones
Indicate whether you wish to have all stations or only new ones
searched for.
Notes:
The frequency search option is to be preferred only in exceptional
cases such as in the event of deviations from the standardized
channels.
If you have purchased a CI module, please insert it as described on
page 10.
Which of the stations of the provider you can watch in the end
depends on which station package you have bought.
To extend an existing station list we recommend you to activate
the option search and store “new stations only”.
Confi rm your selection with OK.
Specify from which station place onwards the stations are to be stored
Specify from which station place onwards the stations are to be stored
and confi rm with OK.
Select “Start search” and confi rm with OK.
Select “Start search” and confi rm with OK.
The station search may take some time.
Do not make any entries or switch off the set during this time.
When the search has ended you will be shown the found and stored sta-
tions sorted in numerical order.
If you also want to search for and store analog stations, repeat the steps
5 to 10.
Select “Analogue” in step 6 and the transmission standard, e.g. “Au-
tom.–BG”.
After the station search has been completed, close the table by pressing
the END button.
Manual station setting
You can also search for and store stations manually. However, detailed
knowledge is necessary for manual programming.
Activate the appropriate menu – depending on whether you want to set
TV or radio stations – in the respective mode (TV or Radio) with the
MENU button.
Select “Setup – Stations” in the TV-menu or “Radio Stations” in the
Select “Setup – Stations” in the TV-menu or “Radio Stations” in the
Radio menu.
Select the entry “Manual tune” and confi rm with OK.
Select the entry “Manual tune” and confi rm with OK.
6.
7.
•
•
•
•
8.
9.
9.
10.
1.
2.
3.
First installation
14
Now enter the necessary setting parameters for each menu item. Press
the INFO button, if you need explanations of the individual menu items.
Notes:
Several radio and TV stations can be broadcast on every channel.
The manual setup does not work with DVB-T stations in UK.
Digital radio stations search
Your receiver can play radio stations via DVB-T in high quality.
Note: Digital radio stations are not broadcasted in the DVB-T standard in
Note: Digital radio stations are not broadcasted in the DVB-T standard in
all regions at present.
Radio stations are stored in a separate station table.
Radio stations are stored in a separate station table.
You can search for and store digital radio stations in the “Radio menu”.
Switch to radio mode with the RADIO button.
Scan stations
Radio: 16 Antenne
Previous station
Change sorting
Change sorting
Switch to ...
Select station
Select station
...
Numerical
1
2
3
4
5
2
3
4
5
6
7
8
8
AUDIO IN
AVS
AV2
AV1
AVS
AV2
AV1
B5 AKTL
BAYERN 1
BR4 KLSK
SUNSHINE
ROCK ANT
BR4 KLSK
SUNSHINE
ROCK ANT
ANTENNE
DLR
DLF
DLF
9
10
11
12
13
14
15
16
17
18
19
20
11
12
13
14
15
16
17
18
19
20
HR-INFO
MDR INFO
MDR FIGA
NDR KULT
SWR1
SWR2
WDR3
WDR5
OESTER 1
MDR JUMP
JAZZ RAD
BLUSAT20
MDR INFO
MDR FIGA
NDR KULT
SWR1
SWR2
WDR3
WDR5
OESTER 1
MDR JUMP
JAZZ RAD
BLUSAT20
END
BACK
MENU
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
9
0
OK
Screen off
OK
Use MENU to call up the “Radio menu” and select “Stations”.
Radio menu
Sound
Stations
Timer functions
Search wizard
Manual tune
Change stations
Change stations
Confi rm with OK.
With the search wizard you can have the radio stations searched for
With the search wizard you can have the radio stations searched for
automatically or manually.
In the “Change search settings” menu you can decide whether to
search for and store all “digital radio stations” or “Only new radio
stations”.
You can search for channels or frequencies.
Follow the wizard.
4.
•
•
•
1.
2.
3.
4.
4.
Finally enter from which station place the found stations are to be
stored.
Press the OK button.
Press the OK button.
Radio menu -> Stations
Start search
Change search settings
Location of TV set
Signal source
Scope of search
Store stations beginning at ...
Signal source
Scope of search
Store stations beginning at ...
Great Britain
Satellite 1: ASTRA 1 (DVB-S)
All stations
Station preset 1 (vacant: 1300)
Satellite 1: ASTRA 1 (DVB-S)
All stations
Station preset 1 (vacant: 1300)
Stations
Your TV set performs the search with the following settings:
Your TV set performs the search with the following settings:
END
BACK
OK
Manual tune Change stations
Search assistant
You now get a summary of the settings you have made.
Select the line “Start search”.
Start the search with OK.
Select the line “Start search”.
Start the search with OK.
If radio stations have been found and stored you get a station table at the
end.
5.
6.
7.
8.
8.
Click on the first or last page to see other LC-32GD7E (serv.man5) service manuals if exist.