Sharp LC-32GA6E (serv.man2) Service Manual ▷ View online
45
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA6E
LC-32GA6E
LC-37GA6E
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
No audio output (3) (Output
to external terminals)
No audio
output from the
headphones.
No audio output
from the
SCAR
T1.
(EXT
-1)
No audio output
from the
SCAR
T2.
(EXT
-2)
No audio output from t
he
EXT
-3.
Are audio signals sent to
the pi
ns (5)(2) of the
headphone terminal
(J402)?
Are audio input/output
sig
nals of the pins
(1)(7)/(3)(5) of IC1351
(HP-AMP) normal?
Are audio output signals
(SPL/R) sent to the pins
(123)(124) of IC1001
(VCTI) normally?
Check the audio input
signals of IC1001 (VCTI),
power supply line, I2C li
ne,
and peripheral c
ircuits.
Confirmation of the se
ttings:
1) Is the MUTE
button of REMOCON set to ON? … Set to OFF
.
2) Is M
ENU-SOUND-LEVELS-EXTERNAL-SCAR
T/A
V
VOL
set to "0=MIN"
? … Set the desired volume between "0-100".
3) Check the connection
with external equipment. … Is there a connection error?
Are audio signals sent
to
the pins (1)(3)
of SCAR
T
-1
(SC1451)?
Are audio signals sent to
the pi
ns (122)(121) of
IC1001?
Are
audio signals sent to
the pins (1)(3) of
SCAR
T
-2
(SC1452)?
Are audio signals sent to
the pins (1)(
7) of IC1402?
Are audio L/R signals sent
to the pins (120)(129) of
IC1001?
Check the 2S-MUTE
and SS-MUTES
signals and peripheral
circuits.
Check IC1001 and its
peripheral circuits.
Check IC1001 and its
peripheral circui
ts.
Check I
C1402 and its
peripheral circuits.
Are audio signals sent to
the pins (5)(8) of the
EXT
-
3 external terminal J401?
Troubleshooting Table (continued)
46
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA6E
LC-32GA6E
LC-37GA6E
LC-32GA6E
LC-37GA6E
No audio output (4) (Sound from external input terminals)
YES
YES
NO
YES
YES
NO
YES
NO
YES
NO
YES
External audio input signals
supplied from SCART1 and EXT3
are not heard.
supplied from SCART1 and EXT3
are not heard.
External audio input signals
supplied from SCART2 and PC
INPUT are not heard.
supplied from SCART2 and PC
INPUT are not heard.
<SCART1>
Is LI1 audio signal supplied from
the pin (6) of the input terminal
SC1451 to the pin (114) of
IC1001?
Is RI1 audio signal supplied from
the pin (2) of the input terminal
SC1451 to the pin (113) of
IC1001?
<EXT3>
Is LI2 audio signal supplied from
the J401 terminal to the pin (116)
of IC1001?
Is RI2 audio signal supplied from
the J401 terminal to the pin (115)
of IC1001?
Is LI1 audio signal supplied from
the pin (6) of the input terminal
SC1451 to the pin (114) of
IC1001?
Is RI1 audio signal supplied from
the pin (2) of the input terminal
SC1451 to the pin (113) of
IC1001?
<EXT3>
Is LI2 audio signal supplied from
the J401 terminal to the pin (116)
of IC1001?
Is RI2 audio signal supplied from
the J401 terminal to the pin (115)
of IC1001?
<SCART2>
Is L audio signal supplied from
the pin (6) of the input terminal
SC1452 to the pin (15) of
IC1401?
Is R audio signal supplied from
the pin (2) of the input terminal
SC1452 to the pin (2) of IC1401?
<PC-INPUT>
Is L audio signal supplied from
the PC-AUDIO CONNECTOR
(J402) to the pin (12) of
IC1401?
Is R audio signal supplied from
the J402 CONNECTOR to the
pin (1) of IC1401?
Is L audio signal supplied from
the pin (6) of the input terminal
SC1452 to the pin (15) of
IC1401?
Is R audio signal supplied from
the pin (2) of the input terminal
SC1452 to the pin (2) of IC1401?
<PC-INPUT>
Is L audio signal supplied from
the PC-AUDIO CONNECTOR
(J402) to the pin (12) of
IC1401?
Is R audio signal supplied from
the J402 CONNECTOR to the
pin (1) of IC1401?
Are audio signals sent to the pins
(3)(13) of IC1401?
(3)(13) of IC1401?
Are LI3 and RI3 audio signals
supplied to the pins (118) and
(117) of IC1001 respectively?
supplied to the pins (118) and
(117) of IC1001 respectively?
Check IC1401 and its
peripheral circuits.
peripheral circuits.
Are audio signals sent to the pins
(1)(7) of IC1351 normally?
(1)(7) of IC1351 normally?
Are audio input signals of the
pins (11) (15) of IC1301(AUDIO-
AMP-IC) normal?
pins (11) (15) of IC1301(AUDIO-
AMP-IC) normal?
Are audio output signals of the
pins (28)(31)/(24) (27) of
IC1301(AUDIO-AMP-IC) normal?
pins (28)(31)/(24) (27) of
IC1301(AUDIO-AMP-IC) normal?
Check the connector (P1301)
and the left and right SP-boxes.
and the left and right SP-boxes.
Check IC1351 and its
peripheral circuits.
peripheral circuits.
Check HEADPHONE-
JACK (J402) or its
peripheral circuits.
JACK (J402) or its
peripheral circuits.
Check IC1301 and its
peripheral circuits.
peripheral circuits.
Troubleshooting Table (continued)
47
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA6E
LC-32GA6E
LC-37GA6E
No audio output (5)
No external input sound Ex 4 comes out
No external analogue input sound Ex 5 comes out
No external digital input sound Ex 5 comes
out
Is the inputted signal from J1901 to
NO
Check IC1906 and
Is the inputted signal from J1902 to
NO
Check IC1906 and
Is the output digital signal pins 84, 85 and
NO
Check IC1904 and
input terminals 1 and 3 of P2103 ?
peripheral components
input terminals 1 and 3 of P2103 ?
peripheral components
86 of IC1904 as
specified?
peripheral components
YES
YES
YES
Is the output analogue signal pins 10 and
NO
Check IC1905 and
11 of IC1905 as specified?
peripheral components
YES
Is the output analogue signal of
NO
Check IC1906 and
pins 1 and 3 of P2103 ?
peripheral components
YES
Is the output signal pin 9 and 7 of
NO
Check Components
P2101 as specified?
units and peripheral.
YES
Are audio signals sent to the pins
NO
Check IC1351 and its
(1) (7) of IC1351 normally?
peripheral circuits.
YES
Are audio input signals of the pins
NO
Check HEADPHONE-
(11) (15) of IC1301(AUDIO-AMP-IC)
JACK (J402) or its
normal?
peripheral circuits.
YES
Are audio output signals of the
NO
Check IC1301 and its
pins (28)(31)/(24) (27) of IC1301
peripheral circuits.
(AUDIO-AMP-IC) normal?
YES
Check the connector (P1301) and
the left and right SP-boxes.
Troubleshooting Table (continued)
48
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA6E
LC-32GA6E
LC-37GA6E
LC-32GA6E
LC-37GA6E
YES
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
No audio output ()
No FM sound.
Confirmation of the settings:
1) Is the MUTE button of REMOCON set to ON
? … Set to OFF
.
2) Are
headphones connected to HEA
DPHONE (J402)?
… Disconnect.
3) Is FM-ANT
-CABLE disconnec
ted or is there a connection error?
… Connect acc
ording to the operation manual.
4) Is "VOLUME" in MENU-SOUND-LEVELS-SPEAKE
RS-VOLUME set to
"MIN=0"?
… Set to the de
sired value between "0-100"
.
Are audio
signals (SP L/R) sent from
the pins
(123)(124) of IC1001
(VCTI)?
Are audio output sign
als of the pins
(1)(7) of IC1351 (H-P
HONE-AMP)
normal?
Are aud
io input signals of th
e pins
(1
1)(15) of IC1301 (AUDIO-AMP-IC
)
normal?
Are audio output signals of the pins
(28)(31)/(24)(27) of IC
1301 (AUDIO-
AMP-IC) normal?
Check the connect
or (P1301) and the
left and right SP-boxes.
Check
IC1351 or its peripheral
circuits.
Check HEADPHONE-J
ACK
(J402) or its peripheral circui
ts.
Check IC1301 and its peripheral
circuits.
Check
SF1201 and its peripheral
circuits.
Are IF signals
(IF+/IF-) supplied to the
pins (109)(
1
10) of IC1001 (VCTI)?
Check if +8V
, +5V and +3.3V are
supplied to the pin
s (126), (106) and
(105) of IC1001 respect
ively
. Or check it
s
peripheral circuits.
Is FM-IF signal sent
from the pin (10)
of TUNER
(T
U1201)?
Check
if power of 33V/5V is s
upplied
to the pins (9)/(7) of
TUNER
(TU1201). Or check its peripheral
parts.
Is FM-IF signal sent from
the pin (4) of
IC1201 (MIXER
Troubleshooting Table (continued)
Click on the first or last page to see other LC-32GA6E (serv.man2) service manuals if exist.