Sharp LC-32GA6E (serv.man2) Service Manual ▷ View online
37
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA6E
LC-32GA6E
LC-37GA6E
How to use the application (MoniWrite.exe)
1. Start application
The following windows open.
The following windows open.
2. Select COM port
Select COM port connected with Serial Controller Board.
Select COM port connected with Serial Controller Board.
38
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA6E
LC-32GA6E
LC-37GA6E
LC-32GA6E
LC-37GA6E
3. Select ResetLogic
Select ResetLogic «positive» or «negative».
Select ResetLogic «positive» or «negative».
Resetlogic setting for each level hardware
2QO\ERDUGLWVHOI
3
79VHWDVVHPEOHG
3
3RVLWLYH
3RVLWLYH
4. Open MOT File
4.1- Click «Open MOT File».
4.1- Click «Open MOT File».
39
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA6E
LC-32GA6E
LC-37GA6E
4.2- Select the monitor microcontroller software (*.MOT) to update.
4.3- Check the selected fi le is correct.
5. Send Start
5.1- Click «SendStart» button and start updating.
5.1- Click «SendStart» button and start updating.
40
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA6E
LC-32GA6E
LC-37GA6E
LC-32GA6E
LC-37GA6E
5.2- Now updating....
( Send fl ash writing control program fi rst, and then send the software.)
5.3- Update completed.
6. After update completed
6.1- Unplug AC cable
6.2- Disconnect serial control board.
6.1- Unplug AC cable
6.2- Disconnect serial control board.
Click on the first or last page to see other LC-32GA6E (serv.man2) service manuals if exist.