Sharp LC-22AD1E (serv.man25) User Manual / Operation Manual ▷ View online
52
Timer functions
Press Yellow to display the “Timer functions”
screen.
screen.
Press a/b to select “Time”, and then press
OK.
OK.
Input the current time (HH:MM:SS) with 0-9.
Press a/b to select the desired item. (See
the table below.)
the table below.)
Press c/d to make the adjustment. If you
select “00:00” for “Sleep timer” or “Alarm”,
input the desired time with 0-9.
select “00:00” for “Sleep timer” or “Alarm”,
input the desired time with 0-9.
Press END to exit.
Choice/Input value/Value range
HH:MM:SS
no
↔HH:MM
no
↔HH:MM
0 – 39
Adjustment item
Time
Sleep timer
Alarm
Alarm volume
Description
The time can be manually set.
The LCD TV set automatically turns off at the specified
time everyday.
time everyday.
The alarm sound turns on at the specified time everyday.
The volume of the alarm sound is selected.
OK
Back
R
End
E
Timer functions
Time [ : : ]
Sleep timer [ no]
Alarm [ no]
Alarm volume [
Alarm [ no]
Alarm volume [
0
]
0
Useful Features
NOTE
• You can also access the Timer functions menu
screen by pressing MENU, then pressing a/b to
select “Timer functions” (see pages 33 and 34).
select “Timer functions” (see pages 33 and 34).
6
2
1
3
4
5
NOTE
• You have to first set the current “Time” to adjust
“Sleep timer”, “Alarm” and “Alarm volume” settings.
Sleep timer
NOTE
• The Sleep timer screen automatically disappears in 3 seconds.
• After you set the sleep timer, turning off MAIN POWER on the TV set or pressing A on the remote
control will cancel the sleep timer setting and the SLEEP indicator goes out.
Directly setting the sleep timer
Press SLEEP to display the sleep timer information and/
or turn off the sleep timer.
or turn off the sleep timer.
| Press SLEEP to display the sleep timer information
| Press SLEEP again to deactivate the sleep timer.
S l e e p t i m e r o n ( 0 0 : 0 1 )
S l e e p t i m e r o f f
53
This enables the selection of the reception mode when receiving a NICAM-I or
NICAM-B/G signal. To let you enjoy NICAM broadcasting, this LCD TV set re-
ceives NICAM system stereo, bilingual, and monaural broadcasts.
NICAM-B/G signal. To let you enjoy NICAM broadcasting, this LCD TV set re-
ceives NICAM system stereo, bilingual, and monaural broadcasts.
When receiving stereo broadcasts:
The LCD TV set is receiving a stereo broadcast.
• Each time you press SOUND, the mode changes
The LCD TV set is receiving a stereo broadcast.
• Each time you press SOUND, the mode changes
between “Stereo” and “Mono”.
• When “Mono” is selected, the TV sound is output
monaurally.
When receiving bilingual broadcasts:
When the LCD TV set is receiving a bilingual programme,
the “Sound 1” mode is automatically selected.
• Each time you press SOUND, the mode changes as
When the LCD TV set is receiving a bilingual programme,
the “Sound 1” mode is automatically selected.
• Each time you press SOUND, the mode changes as
follows:
Sound 1
→ Sound 2 → Sound 1+2 → Mono
When receiving monaural broadcasts:
The LCD TV set is receiving a monaural broadcast.
• Each time you press SOUND, the mode changes
The LCD TV set is receiving a monaural broadcast.
• Each time you press SOUND, the mode changes
between “Nicam” and “Mono”.
NICAM broadcast selection
Mo n o
S t e r e o
S o u n d 1
S o u n d 2
S o u n d 1 + 2
Mo n o
Mo n o
N i c a m
NOTE
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is
automatically terminated and the LCD TV set returns to the normal mode.
• The setting can be individually selected for each channel number.
• You can also turn off the NICAM mode by setting the “Loudsp. sound” item to “Mono” in
the Sound screen, which is displayed when you press Green (see page 36).
Useful Features
54
This enables the selection of the reception mode when receiving an A2 stereo-B/G
signal. To let you enjoy A2 stereo broadcasting, this LCD TV set receives A2
stereo system stereo and bilingual broadcasts.
signal. To let you enjoy A2 stereo broadcasting, this LCD TV set receives A2
stereo system stereo and bilingual broadcasts.
When receiving stereo broadcasts:
The LCD TV set is receiving a stereo broadcast.
• Each time you press SOUND, the mode changes
The LCD TV set is receiving a stereo broadcast.
• Each time you press SOUND, the mode changes
between “Stereo” and “Mono”.
• When “Mono” is selected, the TV sound is output
monaurally.
When receiving bilingual broadcasts:
When the LCD TV set is receiving a bilingual programme,
the “Sound 1” mode is automatically selected.
• Each time you press SOUND, the mode changes as
When the LCD TV set is receiving a bilingual programme,
the “Sound 1” mode is automatically selected.
• Each time you press SOUND, the mode changes as
follows:
Sound 1
Sound 1
→ Sound 2 → Sound 1+2
→ Mono
A2 stereo broadcasts
Mo n o
S t e r e o
S o u n d 1
S o u n d 2
S o u n d 1 + 2
Mo n o
NOTE
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is
automatically terminated and the LCD TV set returns to normal mode setting.
• The setting can be selected individually for each channel number.
• You can also turn off the A2 stereo mode by setting the “Loudsp. sound” item to “Mono” in
the Sound screen, which is displayed when you press Green (see page 36).
Useful Features
55
Teletext
Teletext function
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your System receives Teletext signals broadcast by a
TV network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
entertainment to specially equipped television sets.
Your System receives Teletext signals broadcast by a
TV network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
Teletext mode
Teletext is turned on/off with m on the remote control
unit. You can operate your System in Teletext mode
directly by inputting commands with the remote control
unit.
unit. You can operate your System in Teletext mode
directly by inputting commands with the remote control
unit.
Turning on and off Teletext
Select a TV channel or external input source
providing the Teletext programme.
providing the Teletext programme.
Press m to display the Teletext.
Press m to return to normal screen.
• Each time you press m, the screen switches
as shown upper right.
• If you select a programme with no Teletext
signal, “No Teletext available.” displays.
1
TELETEXT
2
3
RED GREEN YELLOW BLUE
TELETEXT
When viewing the Teletext information
• Press CHa
a
a
a
a to increase the page number.
• Press CHb
b
b
b
b to decrease the page number.
Button functions
Colour (RED/GREEN/YELLOW/BLUE):
You can select a group or block of pages displayed in
the coloured brackets at the bottom of the screen by
pressing the corresponding Colour (RED/GREEN/
YELLOW/BLUE) on the remote control unit.
You can select a group or block of pages displayed in
the coloured brackets at the bottom of the screen by
pressing the corresponding Colour (RED/GREEN/
YELLOW/BLUE) on the remote control unit.
Upper half
Lower half
Full
0 – 9:
Directly select any page from 100 to 899 by using 0 –
9.
Directly select any page from 100 to 899 by using 0 –
9.
f:
Each time you press f, the TELETEXT image switches
as shown below.
Each time you press f, the TELETEXT image switches
as shown below.
k:
To reveal hidden information such as an answer to a
quiz, press k.
To reveal hidden information such as an answer to a
quiz, press k.
• Press k again to hide the information.
v:
To stop updating Teletext pages automatically, press
v.
To stop updating Teletext pages automatically, press
v.
• Press v again to release the hold mode.
Click on the first or last page to see other LC-22AD1E (serv.man25) service manuals if exist.