DOWNLOAD Sharp LC-22AD1E (serv.man25) Service Manual ↓ Size: 6.07 MB | Pages: 68 in PDF or view online for FREE

There are four different ways of activating a child lock:

1. General child lock for all programmes immediately
2. General child lock for all programmes with daily time limit
3. General child lock for all programmes with single time limit
4. Programme-position related child lock without time limit

The Child Lock comes into effect only after the LCD TV set has entered the
standby mode and is then turned on again.

OK

Back

R

End

E

  Child lock

  For all programmes
  For individual progr. only
  Change PIN        [1234]
  Reset
  

OK

Back

R

End

E

  For all programmes

  Immediately        [ no]
  Daily              [ no]
  Once               [ no]

Immediately

Daily

Once

Select “yes” to activate the Child Lock immediately (after the LCD TV
set has been turned off and on again). The lock remains effective until
“no” is selected.

Input the start and end time for a daily-recurring Child Lock. The lock is
activated everyday unless “no” is selected.

Input the start and end time for a once-only Child Lock. The length of the
period should be up to 24 hours.

• The timer takes its clock information from the Teletext broadcast. The teletext broadcast may be in a different time zone and

therefore child lock timer may not activate as expected. Concerning this detail, please refer to page XX.

no

↔yes

no

↔HH:MM-HH:MM

no

↔HH:MM-HH:MM

Perform steps 1 to 3 in
[1] Changing/Resetting the PIN to display
the Child lock screen.

Press a/b to select “For all programmes”,
and then press OK to display the “For all
programmes” screen.

Press a/b to select the desired item. (See
the table below.)

Press c/d to select the desired choice, and,
if required, input digits with 0-9.

Press END to exit.

• If the current clock time is within the time limit, the Child Lock is activated immediately after the LCD

TV set is turned off and on again. For example, if the current clock time is 9:00 and the time limit is
specified from 22:00 to 14:00, the lock is effective from 9:00 to 14:00.

• When a Child Lock is set for all programmes with a time limit, the “Time” item is not displayed in

the TV menu and cannot be selected.

| When the PIN input screen

appears, input your PIN with 0-9.
The normal screen appears when
the PIN is correctly entered.

OK

Back

R

End

E

  Child lock
  

Please enter your PIN.

  Child lock        [????]

You can view a programme for which a Child Lock has been set by temporar-
ily cancelling the Child Lock setting. Perform the procedure below to input
your PIN and cancel the Child Lock if you are prompted to do so.

OK

Back

R

End

E

  Child lock

  For all programmes
  For individual progr. only
  Change PIN        [1234]
  Reset
  

  For individual progr. only

OK

Back

R

End

E

 0

1 E 02
2 E 04 
3 U 02
4 U 04
5 E 05
6 E 08
7 E10

   8 
 9
10
11
12
13
14
15

16
17
18
19
21
22
23
24

SHARP
ZDF
ARD
RTL
SAT1
Pro7

• When a Child Lock is activated, the “Programmes” and “First installation” items are not

displayed in the TV menu and cannot be selected.

Perform steps 1 to 3 in
[2] Changing/Resetting the PIN to display
the “Child lock” screen.

Press a/b to select “For individual progr.
only”, and then press OK to display the
“For individual progr. only” screen.

Press a/b and/or c/d to select the desired
programme.

Press OK to lock the programme. The locked
programme is displayed in red.

Press END to exit.

• To unlock the programme, select the programme and press

OK.

• The Child Lock remains effective until it is cancelled.

• If the PIN has been input incorrectly, “Wrong

PIN!” is displayed.

It is possible to manually adjust various settings for connections with external
devices on the “AV connections” screen.

Select the appropriate signal type and colour standard for the signals from the
video equipment connected to the AV1, AV2 or AV3 terminal.

Press MENU to display the TV menu.

Press a/b to select “AV connections”, and
then press OK to display the “AV connections”
screen.

Press a/b to select “AV1”, “AV2”, “AV3 (Y/
C)”, and “AV3(CVBS)”, and then press OK to
display the signal type selection screen.

Press a/b to select the desired item, and
then press OK.

Press c/d to select the desired “Signal type”,
“AFC” and “Colour system”, and then press
OK.

Press END to exit.

OK

Back

R

End

E

TV menu

  Picture    
  Sound
  Programmes
  Features
  AV connections
  Timer functions
  First installation
  Language

OK

Back

R

End

E

  AV1

  AFC              [Mode1]
  Colour system    [ Auto]

Signal type*

AFC

Colour system

Auto, CVBS, Y/C

To select the signal type of external equipment.

Mode1, Mode2

To select frequency control modes. Mode1 is suitable for DVD players
or decoders, and Mode2 is suitable for VCRs or Camcorders.

Auto, PAL, SECAM,

N358 (NTSC 3.58),
N443 (NTSC 4.43),

PAL60, PAL-M, PAL-N

Colour norm

* “Signal type” is only visible when the AV2 is selected.

• If no (colour) image displays, try to change the other signal type.

• Depending on the compatibility with the various types of equipment, the picture may become skewed. In this case, select the “AFC”

(Automatic Frequency Control) mode that will improve the picture.

• Switching between AV input signals may be slow, depending on the settings in “Colour system”. If you want to speed up signal

switching, switch “Auto” in “Colour System” to the current reception colour system.

OK

Back

R

End

E

  AV1

  AFC              [Mode1]
  Colour system    [ Auto]

OK

Back

R

End

E

  AV connections

  AV1
  AV2
  AV3(Y/C)
  AV3(CVBS)
  For programmes
   

• The influence of the AV control voltage and of fast blank at programme

positions from 1 to 199 can be set.

• When connecting a video device to the AV1 terminal, you need to adjust the

decoder programme settings.

Perform steps 1 and 2 in
[1] AV1/AV2/AV3 to display the “AV
connections” screen.

Press a/b to select “For programmes”,
and then press OK to display the “For
programmes” screen.

Press a/b to select the “AV control
voltage” or “RGB On-screen display.”.

Press c/d to select “yes” or “no”.

Press a/b to select “For decoder
connected to AV1”, and then press OK
to display the decoder programme
selection screen.

Press a/b and/or c/d to select the
programme for the decoder, and then
press OK. Repeat the same procedure if
you want to specify other decoder
programmes.

Press MENU to return to the “For
programmes” screen.

Press a/b to select “Sound from AV1”,
and then press c/d to select the
desired sound source.

Press END to exit.

OK

Back

R

End

E

  For programmes

  AV control voltage      [ no]
  RGB On-screen display   [yes]
  For decoder connected to AV1
  Sound from AV1         [Dec.]

OK

Back

R

End

E

  For programmes

  AV control voltage      [ no]
  RGB On-screen display   [yes]
  For decoder connected to AV1
  Sound from AV1         [Dec.]

OK

Back

R

End

E

  AV connections

  AV1
  AV2
  AV3(Y/C)
  AV3(CVBS)
  For programmes
   

OK

Back

R

End

E

  For programmes

  AV control voltage      [ no]
  RGB On-screen display   [yes]
  For decoder connected to AV1
  Sound from AV1         [Dec.]

  For decoder connected to AV1

OK

Back

R

End

E

 0

1 E 02
2 E 04 
3 U 02
4 U 04
5 E 05
6 E 08
7 E10

   8 
 9
10
11
12
13
14
15

16
17
18
19
21
22
23
24

SHARP
ZDF
ARD
RTL
SAT1
Pro7

• If the item concerned is set to “yes”, the appropriate

picture is through-connected at all programme positions
from 1 to 199 when a control voltage/an RGB signal is
applied.