Sharp LC-22AD1E (serv.man25) User Manual / Operation Manual ▷ View online
12
14
p (DISPLAY INFORMATION)
Analogue TV: Display the programme number
and time. (See page 57 for details on the time
display.)
Digital TV: Display the programme information.
Analogue TV: Display the programme number
and time. (See page 57 for details on the time
display.)
Digital TV: Display the programme information.
15
b (INPUT SOURCE)
Select an input source. (TV, DTV, AV1, AV2, AV3)
(See page 13.)
Select an input source. (TV, DTV, AV1, AV2, AV3)
(See page 13.)
16
l (TOP Overview for TELETEXT)
TELETEXT mode: Display an index page for
CEEFAX/FLOF information. TOP Overview for TOP
programme. (See page 56.)
TELETEXT mode: Display an index page for
CEEFAX/FLOF information. TOP Overview for TOP
programme. (See page 56.)
17
m (TELETEXT)
Select the TELETEXT mode. (all TV image, DTV/
DATA image, all TEXT image, TV/TEXT image)
(See pages 55 and 56.)
Select the TELETEXT mode. (all TV image, DTV/
DATA image, all TEXT image, TV/TEXT image)
(See pages 55 and 56.)
18
ROTATE
Set the orientation of the picture.
When you press ROTATE the current mode
displays. While the indicator displays, each time
you press the button it will change as follows:
NormalsRotate horizontallysRotate
verticallysRotate horizontally and vertically
Set the orientation of the picture.
When you press ROTATE the current mode
displays. While the indicator displays, each time
you press the button it will change as follows:
NormalsRotate horizontallysRotate
verticallysRotate horizontally and vertically
19
0 – 9
TV/External input mode: Set the channel.
TELETEXT mode: Set the page.
TV/External input mode: Set the channel.
TELETEXT mode: Set the page.
20
DTV
Switch from the Digital-TV mode and other input
source.
For example, when viewing an image from AV2,
press DTV to switch to the Digital-TV mode. Press
DTV again to return to AV2 screen.
Switch from the Digital-TV mode and other input
source.
For example, when viewing an image from AV2,
press DTV to switch to the Digital-TV mode. Press
DTV again to return to AV2 screen.
21
Colour (RED/GREEN/YELLOW/BLUE)
TELETEXT mode: Select a page. (See page 55.)
DTV mode: The coloured buttons are used to
select correspondingly to the coloured items in
the menu screen.
TELETEXT mode: Select a page. (See page 55.)
DTV mode: The coloured buttons are used to
select correspondingly to the coloured items in
the menu screen.
22
CHa/CHb
TV/External input mode: Select the channel.
TELETEXT mode: Set the page. (See page 55.)
TV/External input mode: Select the channel.
TELETEXT mode: Set the page. (See page 55.)
23
SLEEP
Display sleep timer information. (See page 52.)
Display sleep timer information. (See page 52.)
24
e (MUTE)
Mute the sound. (See page 14.)
Mute the sound. (See page 14.)
25
MENU
Display the analogue TV menu screen.
Display the analogue TV menu screen.
26
OK
Execute a command.
Execute a command.
27
RETURN
MENU mode: Return to the previous menu
screen.
MENU mode: Return to the previous menu
screen.
28
a/b/c/d (Cursor)
Select a desired item on the setting screen.
DTV mode: Select the channel witha/b.
Select the programme information area when
EPG is displayed.
Select a desired item on the setting screen.
DTV mode: Select the channel witha/b.
Select the programme information area when
EPG is displayed.
Part names – Remote control unit
16
17
17
15
14
19
18
20
21
21
22
23
24
25
26
23
24
25
26
27
28
13
Turning on and off the main power
Switching the TV/VIDEO (TV/DTV/AV1/AV2/AV3) mode
Turn on the power of the connected video
equipment.
equipment.
Press b to select the applicable input
source. The screen displays AV1, AV2 or TV
mode each time b is pressed.
source. The screen displays AV1, AV2 or TV
mode each time b is pressed.
Power/Standby
indicator
indicator
W (MAIN POWER)
A V 3
D T V
A V 1
A V 2
1 S 0 6
1 S 0 6
On-screen display
| Press the W
W
W
W
W (MAIN POWER) switch. The
power/standby indicator instantaneously
changes from red to green and the main unit
is turned on.
changes from red to green and the main unit
is turned on.
| To turn off the main power, press the W
W
W
W
W (MAIN
POWER) switch.
To turn off the LCD TV
Press B. The power/standby indicator will turn red.
Press B. The power/standby indicator will turn red.
To turn the LCD TV back on
Press B again. The power/standby indicator will turn green.
Press B again. The power/standby indicator will turn green.
ON/OFF standby
Basic operation
2
1
NOTE
• About the video modes
TV: Select this when viewing analogue TV broadcasts.
DTV: Select this when viewing digital TV broadcasts.
AV1 and 2: Select this when viewing the signals
DTV: Select this when viewing digital TV broadcasts.
AV1 and 2: Select this when viewing the signals
from the video equipment connected to
the AV-IN 1 and 2 terminals.
the AV-IN 1 and 2 terminals.
AV3: Select this when viewing the signals
from the video equipment connected to
the AV-IN 3 terminals using the VIDEO
or S-VIDEO terminal for video input.
the AV-IN 3 terminals using the VIDEO
or S-VIDEO terminal for video input.
• If both VIDEO and S-VIDEO terminals are connected
with cables, the S-VIDEO input terminal is selected as
the high priority.
the high priority.
Listening with headphones
■ Plug the headphone mini-plug into the headphone jack located on the front of the TV set.
NOTE
• Headphones are not included in the supplied accessories.
• Even if a headphone mini-plug is connected to the headphone jack, sound can be heard from the main unit speaker.
• Even if a headphone mini-plug is connected to the headphone jack, sound can be heard from the main unit speaker.
OK
Back
R
End
E
Headph. vol.
3
0
0
Please refer to page 36 to adjust the
sound volume.
sound volume.
Headphones
NOTE
• The On-screen indicator disappears after a few
seconds.
14
Changing channels
You can select channels using 0-9 or CH a/b.
• To handle the increasing number of channels available, this LCD TV set allows you
to select up to 200 channels (0 to 199).
Using CH a/b
Press CH a and the channels change in the order shown below:
1
→ 2 → 3 → . . . → 198 → 199 → 0 → 1 → 2 → 3 → . . .
Press CH b and the channels change in the order shown below:
3
→ 2 → 1 → 0 → 199 → 198 → . . . → 3 → 2 → 1 → . . .
NOTE
• Channel “0” is prepared for RF output of VCR.
• Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-
• Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-
digit channel mode.
When viewing Teletext information
View a page directly which is 3-digit page number from 100 to 899 by pressing
buttons 0 to 9.
buttons 0 to 9.
Sound volume
To adjust the volume
| Press ik to increase the sound volume. The
numerical value increases.
| Press il to decrease the sound volume. The
numerical value decreases.
To mute the sound
| Press e (Mute) to temporarily turn off the sound.
“Sound off” is displayed.
| Press e (Mute) to turn off the Mute function.
“Sound on” is displayed.
NOTE
• When Volume i (k/l) is pressed in the Mute mode,
the sound turns on and the volume indicator is displayed.
• The Mute function is cancelled when B is pressed.
S o u n d o f f
S o u n d o n
Volume
50
50
Volume
10
10
Using 0 – 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
When selecting the channel using 0 to 9, finish inputting the channel number by
holding down the button for the last digit for a moment.
holding down the button for the last digit for a moment.
a
To select a 1-digit channel (e.g. channel 2):
• Press the 2 button.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
• When you enter the channel, a 3-digit input underbar appears in digital TV mode
To select a 1-digit channel (e.g. channel 2):
• Press the 2 button.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
• When you enter the channel, a 3-digit input underbar appears in digital TV mode
and a 2-digit in analogue TV mode.
Once you input a channel it is set after a few moments if there are no other
operations. Or press OK to set immediately after input.
Once you input a channel it is set after a few moments if there are no other
operations. Or press OK to set immediately after input.
Volume
(ik/l) CH s/r
Basic operation
15
Digital TV features
Selecting menu items (Digital)
Guide
(RED)
(RED)
Setup
(GREEN)
(GREEN)
Preference
(BLUE)
(BLUE)
Theme [25]
Mode [25]
Service lists
Service list type
TV service lists
TV service lists
Radio services lists
Rearrange TV services [28]
New TV services [29]
New TV services [29]
Installed TV services [30]
Uninstalled TV services [30]
Rearrange radio services [28]
New radio services [29]
Rearrange radio services [28]
New radio services [29]
Installed radio services [30]
Uninstalled radio services [30]
System setting
Language
Audio [20]
Subtitle [20]
Subtitle [20]
Teletext [21]
Time Zone [16]
Banner duration [19]
Installation
Country [31]
Service scan
Search [16]
Found TV services [17]
Found TV services [17]
Found radio services [17]
Store [18]
Discard [18]
Reinstall all services [22]
System software [31]
Access restrictions
Maturity rating [22]
TV services [23]
Radio services [23]
Audio lang. [26]
Subtitle lang. [26]
List of DTV menu items to help you with operations.
Numbers within brackets indicate the page(s) where the topic is explained.
NOTE
• The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual
operations.
Selecting DTV mode
Press b to toggle between TV/DTV/AV1/AV2/AV3 mode.
Press DTV MENU to directly display DTV menu screen.
Press DTV MENU to directly display DTV menu screen.
About colour buttons
Press DTV MENU to display the DTV Menu screen.
Guide
Setup
Preference
Simply press colour button (RED/GREEN/BLUE) to directly display desired DTV
menu.
menu.
Guide: RED button
Setup: GREEN button
Preference: BLUE button
Setup: GREEN button
Preference: BLUE button
Click on the first or last page to see other LC-22AD1E (serv.man25) service manuals if exist.