DOWNLOAD Sharp LC-20B6E (serv.man27) Service Manual ↓ Size: 3.35 MB | Pages: 48 in PDF or view online for FREE

• Cleaning—Unplug the AC cord

from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use
liquid cleaners or aerosol
cleaners.

• Stand—Do not place the product

on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as
damage to the product. Use only
a cart, stand, tripod, bracket or
table recommended by the
manufacturer or sold with the
product. When mounting the
product on a wall, be sure to
follow the manufacturer’s
instructions. Use only the
mounting hardware recommended
by the manufacturer.

• When relocating the product

placed on a cart, it must be
moved with utmost care. Sudden
stops, excessive force and
uneven floor surface can cause
the product to fall from the cart.

• Water and moisture—Do not use

the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in
a wet basement.

• Ventilation—The vents and other

openings in the cabinet are
designed for ventilation. Do not
cover or block these vents and
openings since insufficient
ventilation can cause overheating
and/or shorten the life of the
product. Do not place the product
on a bed, sofa, rug or other similar
surface, since they can block
ventilation openings. This product
is not designed for built-in
installation; do not place the
product in an enclosed place
such as a bookcase or rack,
unless proper ventilation is
provided or the manufacturer’s
instructions are followed.

• The LCD panel used in this

product is made of glass.
Therefore, it can break when the
product is dropped or applied
with impact. Be careful not to be
injured by broken glass pieces in
case the LCD panel breaks.

• Heat sources—Keep the product

away from heat sources such as
radiators, heaters, stoves and
other heat-generating products
(including amplifiers).

• Do not place vases or any other

water-filled containers on this
product. The water may spill onto
the product causing fire or electric
shock.

• To prevent fire, never place any

type of candle or naked flames on
the top or near the TV set.

• To prevent fire or shock hazard,

do not place the AC power cord
under the TV set or other heavy
items.

The LCD panel is a very high technology product with
2,359,296 thin film transistors, giving you fine picture
details.
Due to the very large number of pixels, a few
non-active pixels may occasionally appear on the screen
as a fixed point of blue, green or red.
This is within product specifications and does not
constitute a fault.

• Micronas

®

 VOICE is a Speech Enhancement and Intelligibility Processing technology by Micronas GmbH.

• Micronas is a trademark of Micronas GmbH.

LC-20B6E_E_P01-10.p65

04.6.11, 5:54 PM

3

Make sure the following accessories are provided with the LCD TV set.

Wireless remote control

AC cord

“AAA” size batteries (

×2)

AC adapter

*Product shape may vary from country to country.

Operation manual

RGB cable

Cable holder

Cable clamp

LC-20B6E_E_P01-10.p65

04.6.11, 5:54 PM

4

Before using the LCD TV set for the first time, install the two “AAA” size batteries (supplied) in the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

Open the battery cover.

Insert two “AAA” size batteries.

Close the battery cover.

• Place batteries with their

terminals corresponding
to the (+) and (–)
indications in the battery
compartment.

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old

batteries to leak chemicals.

• Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical

leakage is found, wipe it off with a cloth.

• The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.
• If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.

• Engaging the lower

claw with the remote
control, close the
cover.

Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.

Cautions regarding use of the remote control
• Do not apply shock to the remote control. In addition, do not

expose the remote control to liquids, and do not place it in an area
with high humidity.

• Do not install or place the remote control under direct sunlight. The

heat may cause deformation of the unit.

• The remote control may not work properly if the remote sensor

window is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the remote
control closer to the remote sensor window.

• Slide the cover while

pressing the (

) part.

 

+

 

–

 

+

 

–

Headphone jack

OPC indicator

STANDBY/ON 
indicator

Remote sensor

OPC sensor

LC-20B6E_E_P01-10.p65

04.6.11, 5:54 PM

5

■ Using a TV antenna cable

To enjoy a clearer picture, we recommend that
you use an outdoor antenna. The following is a
brief explanation of the type of connection that
is used for coaxial cable:
• Please ensure your 75-ohm coaxial cable is

fitted with a DIN 45325 (IEC169-2) coaxial
plug and plug it into the antenna terminal at
the back of the LCD TV set (antenna cable
not supplied).

■ Using an FM radio antenna cable

Connect an FM radio antenna cable (not
supplied) to the FM antenna terminal. You can
enjoy listening to the FM radio. For details about
the menu settings, refer to pages 13 and 14.

FM antenna 
terminal

Antenna 
terminal

Plug the headphone mini-plug into the Headphone jack located on the front of the LCD TV set.
Please refer to page 17 to adjust the sound volume using the volume indicator.

• Headphones are not included in the supplied accessories.
• Even if a headphone mini-plug is connected to the

Headphone jack, sound can be heard from the main unit
speaker.

Headphones

POWER INPUT
terminal (DC12V)

Connect to the DC input terminal of the LCD TV set using the AC adapter and the AC cord (both supplied).

To POWER INPUT
terminal

Plug into an AC outlet.

AC cord

AC adapter

* Product shape may vary

from country to country.

Household

power outlet

Pull down the hook to
open the cover.

75-ohm coaxial cable
(round cable)

To antenna terminal (

)

Pull down the hook
to open the cover.

■ Using the AC Adapter

• Although the AC adapter may become warm during use, this is not a malfunction.
• Do not wrap or cover the AC adapter with a blanket or similar covering. This can cause a malfunction or accident.
• Do not attempt to disassemble or modify the AC adapter. The insides of the AC adapter contain high-voltage components that can

result in the risk of electrical shock.

• Always turn the   (MAIN POWER) switch of the LCD TV set to OFF when connecting the AC adapter.
• Unplug the AC adapter from the LCD TV set and power outlet when the LCD TV set is not to be used for a long period of time.

FM antenna cable

To FM antenna terminal

LC-20B6E_E_P01-10.p65

04.6.11, 5:54 PM

6