DOWNLOAD Sharp LC-20B6E (serv.man27) Service Manual ↓ Size: 3.35 MB | Pages: 48 in PDF or view online for FREE

• If the current clock time is within the time limit, the Child Lock is

activated immediately after the LCD TV set is turned off and on
again. For example, if the current clock time is 9:00 and the time
limit is specified from 22:00 to 14:00, the lock is effective from 9:00
to 14:00.

• When a Child Lock is set for all programmes with a time limit, the

“Clock setup” on the Setup Menu screen cannot be selected.

• The child lock timer takes its clock information from the Teletext

broadcast. The Teletext broadcast may be in a different time zone
and therefore child lock timer may not activate as expected.
Please refer to page 33 for details.

Perform steps 1 and 2 in [2] Changing/Cancelling a
PIN to display the “Child lock” screen.

Press '/" to select “For individual progr.only”, and
press OK to display the “For individual progr.only”
screen.

: SELECT  O K : ENTER    M : BACK  E : EXIT

  M e n u [ F e a t u r e s : C h i l d   l o c k ]

M e n u [ F e a t u r e s : C h i l d   l o c k ]

  F o r   i n d i v i d u a l   p r o g r . o n l y

F o r   a l l   p r o g r a m m e s
F o r   i n d i v i d u a l   p r o g r . o n l y
C h a n g e   P I N
C a n c e l   P I N

Press '/"/\/| to select the desired programme.

Press OK to lock the programme.

• The locked programme is displayed in red.

  M e n u [ F e a t u r e s : C h i l d   l o c k ]

M e n u [ F e a t u r e s : C h i l d   l o c k ]

  F o r   i n d i v i d u a l   p r o g r . o n l y

                              8   E   9           1 6   E 5 4
        1   S   6             9   E 1             1 7   E 5 6
        2   S   8           1     E 1 1           1 8   E 5 7
        3   S 1             1 1   E 3 6           1 9
       

4

 

S 1 1

          1 2   E 3 7           2  

        5   E   3           1 3   E 3 8           2 1
        6   E   5           1 4   E 5             2 2
        7   E   6           1 5   E 5 3           2 3

: SELECT  O K : ENTER    M : BACK  E : EXIT

0
0

0

0
0
0

0

0

0

0

0

0

• To unlock the programme, select the programme, and press OK.
• The Child Lock remains effective until it is cancelled.

Press END to exit.

• When a Child Lock is activated, “Cannot operate” is displayed in

the “Programmes-TV”, and “First installation” items are selected.

You can view a programme for which a Child Lock has
been set by temporarily cancelling the Child Lock setting.
Perform the procedure below to input your PIN and
cancel the Child Lock if you are prompted to do so.

When the PIN input screen is displayed, input your PIN with
Channel Select.
• The normal screen appears when the PIN is correctly input.

  C h i l d   l o c k

C h i l d   l o c k

P l e a s e   i n p u t   y o u r   P I N :

                                 
  ? ? ? ?

• If the PIN has been input incorrectly, “Wrong PIN!” is displayed.

• There are four different ways of activating a Child Lock:

1. General child lock for all programmes immediately
2. General child lock for all programmes with daily time

limit

3. General child lock for all programmes with single

time limit

4. Programme-position-related child lock without time

limit

• The Child Lock comes into effect only after the LCD TV

set has been put into the standby mode and is then
turned on again.

Perform steps 1 and 2 in [2] Changing/Cancelling a
PIN to display the “Child lock” screen.

Press '/" to select “For all programmes”, and press
OK to display the “For all programmes” screen.

: SELECT  O K : ENTER    M : BACK  E : EXIT

  M e n u [ F e a t u r e s : C h i l d   l o c k ]

M e n u [ F e a t u r e s : C h i l d   l o c k ]

  F o r   a l l   p r o g r a m m e s

F o r   a l l   p r o g r a m m e s
F o r   i n d i v i d u a l   p r o g r . o n l y
C h a n g e   P I N
C a n c e l   P I N

Press '/" to select the desired item.

  M e n u [ F e a t u r e s : C h i l d   l o c k ]

M e n u [ F e a t u r e s : C h i l d   l o c k ]

  F o r   a l l   p r o g r a m m e s
A d j u s t   s e t t i n g

  I m m e d i a t e l y     Y e s  

  D a i l y                 N o
  O n c e                   N o

Press \/| to make the setting, and, if required, input
digits with Channel Select.

Press END to exit.

Immediately

Daily

Once

Select “Yes” to activate the Child
Lock immediately (after the LCD
TV set has been turned off and
on again). The lock remains
effective until “No” is selected.

Input the start and end time for a
daily-recurring Child Lock. The
lock is activated everyday unless
“No” is selected.

Input the start and end time for a
once-only Child Lock. The length
of the period should be up to 24
hours.

No 

 Yes

No

HH:MM-HH:MM

No

HH:MM-HH:MM

LC-20B6E_E_P25-32.p65

04.6.11, 5:56 PM

31

This enables the selection of the reception mode when
receiving an A2 stereo signal. To let you enjoy A2 stereo
broadcasting, this LCD TV set receives A2 stereo system
and bilingual broadcasts.

Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press SOUND, the mode changes between

“Stereo” and “Mono”.

• When “Mono” is selected, the TV sound is output monaurally.

Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Each time you press SOUND, the mode changes as follows:

• If approximately 3 seconds pass without a button being pressed,

the mode setting is automatically terminated and the LCD TV set
returns to normal mode setting.

• The setting can be selected individually for each channel number.
• You can also turn off the A2 stereo mode by setting the “Loudsp.

sound” item to “Mono” on the Sound Menu screen, which is
displayed when you press the Green button (see page 17).

This enables the selection of the reception mode when
receiving an FM radio stereo signal. To let you enjoy FM
radio stereo broadcasting, this LCD TV set receives FM radio
stereo system and monaural broadcasts.

Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press SOUND, the mode changes between

“Stereo” and “Mono”.

• When “Mono” is selected, the FM radio sound is output

monaurally.

Monaural
The LCD TV set is receiving a monaural broadcast.
• Even if you press SOUND, the mode does not change.

This enables the selection of the reception mode when
receiving a NICAM-I or NICAM-B/G signal. To let you enjoy
NICAM broadcasting, this LCD TV set receives NICAM
stereo system, bilingual, and monaural broadcasts.

Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press SOUND, the mode changes between

“Stereo” and “Mono”.

• When “Mono” is selected, the TV sound is output monaurally.

Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Each time you press SOUND, the mode changes as follows:

Monaural
The LCD TV set is receiving a monaural broadcast.
• Each time you press SOUND, the mode changes between

“Nicam” and “Mono”.

• If approximately 3 seconds pass without a button being pressed,

the mode setting is automatically terminated and the LCD TV set
returns to the normal mode.

• The setting can be individually selected for each channel number.

LC-20B6E_E_P25-32.p65

04.6.15, 10:25 AM

32

Select a TV channel that is broadcasting the Teletext
programme.

Press TEXT to display Teletext screen.

• To turn off the Teletext mode, press TEXT again.

   

When TOP Teletext is being broadcast, you can display
the TOP line, which contains the operating instructions on
the screen.

Press the Coloured buttons to operate the Teletext screen.

• Press Red to display the previous page and Green to display the

next page. Yellow and Cyan are as indicated on the TOP line.

• By pressing Red, the previously selected page will appear

down to the first page which showed up directly after
switching on the Teletext. Therefore Red has no function
directly after switching on the Teletext.

■ What is Teletext?

Teletext is an information service organised like a

magazine, which is provided by some TV stations in
addition to regular television broadcasting. Your LCD TV
set receives special Teletext signals broadcast by a TV
station, processes the information and displays it
graphically on the screen. News, weather and sports
information, stock exchange prices, programme reviews
and closed captioning for people hard of hearing are
among the many services available through Teletext.

■ Teletext mode

Teletext is activated with TEXT on the remote control and

is also closed with it. The LCD TV set can be controlled in
Teletext mode directly by inputting commands with the
remote control and indirectly through the on-screen
display (menu system).

■ Operating instructions in Teletext mode

• The FLOF system for Teletext is transmitted in the UK

currently.

• The TOP system for Teletext is transmitted in Germany

currently.

• If TOP Teletext is broadcast, a control line and TOP line

can be displayed on the screen. The TOP line involves
the operating instructions associated with all of the
Coloured buttons if TOP text is transmitted, or the
operating instructions for only Red and Green if TOP
text is not being transmitted.

• If there are subpages, a control line holding the operat-

ing instructions for subpages can be displayed on line
24.

When receiving the signal such as subtitle of the Teletext
with following conditions, the image does not have a colour.
In this case, change the settings or input terminal for getting
the colour image.
• When selecting “Y/C” of “Signal type” in “AV1”
• When connecting to the S-VIDEO terminal on the AV-IN2

LC-20B6E_E_P33-34.p65

04.6.11, 5:56 PM

33

If a page has been selected from among several subpages,
you can display a control line which contains the subpage
numbers.

Press SUBPAGE.

• The control line with the subpage numbers is displayed

on line 24, and the number of the currently selected
subpage is displayed in blue.

Press \/| to select the desired subpage number.

• The selected subpage is displayed.
• You can also use Channel Select to select the desired

subpage.

Press SUBPAGE to turn off the control line.

When TOP Teletext is being broadcast, you can display the
TOP table with the current programme data if one exists.

Press OK to display the TOP table.

• The Teletext page is temporarily turned off.

Press '/" to select the desired item.

• Press \/| to select topics (column 1) or subtopics

(column 2) if they exist.

Press OK.

• A page associated with the selected item is displayed.

During Teletext broadcast, press MENU to display the
“Character set” screen.

    C h a r a c t e r   s e t

    W e s t   E u r o p e
    E a s t   E u r o p e
    T u r k i s h / G r e e k
    C y r i l l i c

           

: SELECT  O K : ENTER    M : BACK  E : EXIT

Press '/" to select the desired character set.

• The colour of the letters will turn to yellow. When selecting

the character set, pressing OK will change the letters to grey
for an instant and then return them back to yellow.

Press END to exit.

● HOLD on the remote control can be used to hold the

current teletext page.
Press the button again to cancel the Hold mode.

● '/" can be used to zoom the current Teletext page as

shown below.
• The screen is displayed in each mode each time '/" is

pressed.

ABC
DEF

ABC

DEF

● SUBTITLE can be used to quickly activate subtitles.

• Press TEXT to deactivate subtitles.

● REVEAL can be used to display hidden information such

as solutions to riddles and puzzles.
Press the button again to hide the information.

LC-20B6E_E_P33-34.p65

04.6.11, 5:56 PM

34