DOWNLOAD Sharp LC-20B6E (serv.man27) Service Manual ↓ Size: 3.35 MB | Pages: 48 in PDF or view online for FREE

To view an image from a PC, perform the following procedure.
1 Select the PC mode using INPUT on the remote control or the LCD TV set. (See page 11.)
2 Select the PC input signal. (See page 36.)
3 Select the PC sound input mode. (See page 18.)
4 Adjust the “Fine sync.” items if the PC image does not come in clearly. (See page 36.)

Use the PC-IN terminal to connect a PC.

• This LCD TV set is compatible with VESA-standard DDC 1/DDC 2B.
• Be sure to read the operation manuals of the devices to be connected before making connections.
• Make sure to select the same signal values for the output signal of a PC and the input signal of the LCD TV set before connecting with the

PC. (See pages 36 and 37.)

• Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to your

PC’s manuals regarding converting to external output.

PC

ø3.5 mm stereo minijack cable 

(commercially available)

RGB cable (supplied)

To AUDIO 
input terminal

To Audio output 
terminal

To ANALOG RGB 
input terminal

To ANALOG RGB 
output terminal

• Connect the thumbscrew cable

making sure that it fits correctly
into the terminal. Then, firmly
secure the connectors by
tightening the screws on both
sides of the plug.

• Do not remove ferrite cores

attached to the RGB cable.

1

R

6

GND (Ground)

q

Not connected

2

G

7

GND (Ground)

w

SDA

3

B

8

GND (Ground)

e

HD

4

Not connected

9

Ⳮ5V

r

VD

5

CSYNC

0

GND (Ground)

t

SCL

•  Pin No. 5 on the LCD TV set is not used for inputting the signal.
•  Pin No. 9 is not connected with the supplied RGB cable.

LC-20B6E_E_P35-39.p65

04.6.11, 5:56 PM

35

Adjust the PC image using the “Fine sync.” menu.

Perform steps 1 to 3 in Input Signal (for PC Mode) to
display the “PC setup” screen.

Press '/" to select “Fine sync.”, and press OK.

  M e n u

M e n u  [ S e t u p : P C   s e t u p ]

  F i n e   s y n c .

I n p u t   s i g n a l
F i n e   s y n c .

                 

Press '/" to select the specific adjustment item.

  M e n u

M e n u  [ S e t u p : P C   s e t u p ]

  F i n e   s y n c .      

  F i n e   s y n c .                
A d j u s t   s e t t i n g

  H . P O S .  

[       ] –                 +

  V . P O S .   [       ] –        

                +              

  C l o c k     [       ] –                 +  
  P h a s e     [       ] –                 +
  R e s e t

0
0
0
0

Press \/| to adjust the item to your desired position.

Press END to exit.

• When resetting all adjustment items to factory preset values,

perform the following procedures.
1 Press '/" to select “Reset”, and press OK.
2 Press '/" to select “Yes”, and press OK.

H.POS.

V.POS.

Clock

Phase

Centres the image by moving it to the left or right.

Centres the image by moving it up or down.

Adjusts the clock frequency.

Adjusts the clock phase.

Select the computer input signal before displaying the PC
image on the LCD TV screen.

• Make sure to select the input signal to “1024 ×

×

×

×

× 768” or

“640 ×

×

×

×

× 480”, before connecting a PC.

Press MENU to display the Menu screen.

Press \/| to select “Setup”.

Press '/" to select “PC setup”, and press OK.

: SELECT  O K : ENTER    M : BACK  E : EXIT

  M e n u [ S e t u p : P C   s e t u p ]
Picture

Sound

Setup

Features

                  P r o g r a m m e s - T V
                  P r o g r a m m e s - F M   r a d i o
                  F i r s t   i n s t a l l a t i o n
                  R o t a t e
                  A V   c o n n e c t i o n s
                  C l o c k   s e t u p
                 

P C   s e t u p

                  L a n g u a g e

Press '/" to select “Input signal”, and press OK.

  M e n u

M e n u  [ S e t u p : P C   s e t u p ]

  I n p u t   s i g n a l

I n p u t   s i g n a l
F i n e   s y n c .

                 

Press '/" to select the desired input signal, and press
OK.

  M e n u

M e n u  [ S e t u p : P C   s e t u p ]

  I n p u t   s i g n a l
S e l e c t   o p t i o n

   

1   2 4 x 7 6 8

   

6 4   x 4 8  

               

0

0

0

Press END to exit.

LC-20B6E_E_P35-39.p65

04.6.23, 10:48 AM

36

When this function is set to “On”, the power will automatically
shut down.

Press MENU to display the Menu screen.

Press \/| to select “Features”.

Press '/" to select “Power management”, and press
OK.

  M e n u [ F e a t u r e s : P o w e r   m a n a g e m e n t ]
Picture

Sound

Setup

Features

                          W i d e   m o d e
                          B a c k l i g h t
                          T i m e r   f u n c t i o n s
                          A u t o   p o w e r   o f f
                          O n - s c r e e n   d i s p .
                          C h i l d   l o c k
                         

P o w e r   m a n a g e m e n t

: SELECT  O K : ENTER    M : BACK  E : EXIT

Press '/" to select “On” or “Off”, and press OK.

  M e n u [ F e a t u r e s : P o w e r   m a n a g e m e n t ]
S e l e c t   o p t i o n
                   
   

O n               

   
    O f f  

                          

     
 

If no signal inputs for 8 minutes, the power shuts
down.

No power management.

On

Off

• The remaining time is displayed 5 minutes before the power is

turned off.

• Even if you start using the PC and the signal inputs again, the

LCD TV set stays off.

• The LCD TV set turns on again by pressing   (MAIN POWER) on

the LCD TV set or   | on the remote control. (See page 11.)

• “Off” is factory preset value.

• The numerical values for resolutions and frequencies mentioned

above are standard. They may differ from the values actually
displayed.

31.5

37.9

31.5

37.9

31.5

37.9

37.5

43.3

31.5

35.1

37.9

48.1

46.9

53.7

48.4

56.5

60.0

68.7

45.0

48.1

64.0

34.9

49.7

60.2

60

85

60

85

60

72

75

85

60

56

60

72

75

85

60

70

75

85

60

60

60

67

75

75

PC

MAC 13"

MAC 16"

MAC 19"

 

VGA

WVGA

SVGA

XGA

WXGA

SXGA

VGA

SVGA

XGA

 

640 × 400

720 × 400

640 × 480

848 × 480

800 × 600

1,024 × 768

1,280 × 720

1,280 × 768

1,280 × 1,024

640 × 480

832 × 624

1,024 × 768

✔

✔

LC-20B6E_E_P35-39.p65

04.6.23, 10:48 AM

37

• For the cable, except for the RGB cable, use a commercially available audio/video cable.
• Only connect audio/video signals to AV-IN1 and 2 terminals. Connecting other signals may result in a malfunction.
• The VIDEO input terminal and the S-VIDEO input terminal on the AV-IN2 side are shared connections with priority given to the S-VIDEO

terminal. If both terminals are connected, the video signals from the S-VIDEO input terminal are selected for the AV-IN2 input.
When viewing video from the VIDEO input terminal, do not connect anything to the S-VIDEO input terminal.

• For more information about external device connections, see the operation manuals of your external devices.

You can enjoy picture and sound by connecting devices, such as a VCR or home video game system, to the terminals located
on the rear of the LCD TV set.
When connecting an external device, turn off the power of the LCD TV set first to prevent any possible damage.

• PC

<Example>

• DVD player

<Example>

• Audio amplifier

* If your external device has a COMPONENT

terminal, COMPONENT connection is recom-
mended (you can view high-quality pictures).

<Example>

• Camcorder
• Home video game system
• VCR

* If your external device has an S-VIDEO terminal,
  S-VIDEO connection is recommended.

• Decoder

LC-20B6E_E_P35-39.p65

04.6.11, 5:57 PM

38