DOWNLOAD Sharp GENERAL INFORMATION (serv.man6) Service Manual ↓ Size: 4.34 MB | Pages: 15 in PDF or view online for FREE

Model
GENERAL INFORMATION (serv.man6)
Pages
15
Size
4.34 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / LCD / LC40LE271K
File
general-information-sm6.pdf
Date

Sharp GENERAL INFORMATION (serv.man6) User Manual / Operation Manual ▷ View online

Appendix
12 - 
 - 13
Troubleshooting
Problem
Possible Solution
No picture
1�  Connect power cord correctly�
2�  Turn on power�
3�  Connect signal cable correctly�
4�  Press any button on the LCD TV�
Abnormal colours
Connect signal cable correctly�
Twisted picture
1�  Connect signal cable correctly�
2�  Please use compatible signal�
Picture too dark
Adjust brightness and contrast�
Audio only, no images
1�  Please check if input signal is connected correctly�
2�  TV-RF signal must not be lower than 50dB�
Picture only, no audio
1�  Connect signal cable correctly�
2�  Adjust volume to proper level�
3�  Connect audio signal cable correctly�
4�  TV-RF signal must not be lower than 50dB�
Cannot use remote control
1�  Please change battery�
2�  Turn off power for 10 seconds; and then restart power�
Cannot receive sufficient channels 
through antenna
Please use the Channel Scan function to increase the number of channels not 
included in memory�
No colour
Please adjust the colour setup�
Blinking picture accompanied by ghost 
image
1�  Check the connection of antenna/signal cable�
2�  Check if channel is in play mode�
3�  Press signal source and change input mode�
Broken lines or segments
Adjust antenna�
Keep the TV away from noise sources, such as automobiles, neon lights, and 
hair dryers�
Certain TV channels are blocked (Hope 
to acquire some channels)
Please use the Update Scan method to add the channels not included in 
memory�
Overlapping images or ghost images
Please use multi-directional outdoor antenna�
(If your TV is subject to the influence of nearby mountains or buildings)�
Cannot use a function
If the item you choose turns gray, that item cannot be selected�
Cannot receive programmes
Please use the Update Scan method to add the channels not included in 
memory�
Environmental specifications
A
Product Fiche
B
Commercial Brand:
SHARP
C Product�
LCD TV
D Model name
LC-32LD170E
LC-32LD171E
LC-32LD172E
LC-40LD270E
LC-40LD271E
LC-40LD272E
LC-50LD270E
LC-50LD271E
LC-50LD272E
E Energy Efficiency Class
Class A+
Class A+
Class A+
F
Visible screen size(diagonal aprox)
(inch/cm)
32” / 80 cm
40” / 101 cm
50” / 127 cm
G
On mode average power consumption
(Watt)
31W
46W
71W
H
Annual energy consumption
(kWh/annum)
45kWh
67kWh
104kWh
I
Standby power consumption(Watt)
0�26W(LD170E/D171E)
0�3W(LD172E)
0�27W(LD270E/LD271E)
0�3W(LD272E)
0�27W(LD270E/LD271E)
0�3W(LD272E)
G Off mode power consumption(Watt)
N/A
N/A
N/A
K Display resolution(Pixels)
1366 x 768
1920 x 1080
1920 x 1080
NOTE
•  The power consumption of On-Mode varies depending on the images the TV displays�
14 - 
Appendix
Specification
Item
32” LCD COLOUR TV
Model: LC-32LD170E
Model: LC-32LD171E
Model: LC-32LD172E
40” LCD COLOUR TV
Model: LC-40LD270E
Model: LC-40LD271E
Model: LC-40LD272E
50” LCD COLOUR TV
Model: LC-50LD270E
Model: LC-50LD271E
Model: LC-50LD272E
LCD screen size (diagonal)
32” / 80 cm
40” / 101 cm
50” / 127 cm
Number of dots
3,147,264 dots 
(1366 x 768 x 3 dots)
6,220,800 dots 
(1920 x 1080 x 3 dots)
6,220,800 dots 
(1920 x 1080 x 3 dots)
Video Colour System
PAL/SECAM/NTSC 3�58/NTSC 4�43/PAL 60
TV 
Function
TV-Standard
Analogue CCIR (B/G, I, D/K)
Digital
DVB-T/C, DVB-T2 (except LC-32LD170E/ LC-40LD270E/ LC-50LD270E), 
DVB-S/S2 (only LC-32LD172E/ LC-40LD272E/ LC-50LD272E) 
Receiving 
Channel
VHF/UHF ATV: IRA-E69, DVB-T: E5-E69
CATV
S-band, S1–S41ch
SAT
950MHz – 2150MHz
TV-Tuning System
Auto Preset 1599 ch, Auto Label, Auto Sort
Stereo/Bilingual
NICAM/A2
Audio amplifier
5 W x 2
8 W x 2
Speaker    (mm)
132(H) x 34(W) x 36�5(D) 
Rear
ANTENNA
UHF/VHF 75 
SCART
SCART (AV input, Y/C input, RGB input, TV output )
CVBS/COMPONENT
CVBS/Y/Pb(Cb)/Pr(Cr), RCA pin (L/R)
Digital Audio out
Optical Digital audio output x 1 (PCM)
HDMI 1
Digital video and audio input, ARC
HDMI 2
Digital video and audio input
HEADPHONE
Ø 3�5mm jack (Audio output)
Side
C� I� (Common Interface) EN50221, R206001, CI Plus specification
USB 
Software update, multi-media play
OSD Language
English, German, French, Italian, Dutch, Spanish, Greek, Portuguese, Swedish, 
Finnish, Russian, Polish, Turkish, Hungarian, Czech, Slovak, Danish, Norwegian, 
Estonian, Latvian, Lithuanian, Slovenian, Bulgarian, Croatian, Romanian, Serbian, 
Ukrainian,Hebrew, Arabic
Power Requirement
AC 220–240 V, 50 Hz
Power Consumption
(IEC60065)
50 W 
75 W 
110 W 
Standby Consumption
< 0�3W
< 0�3W
< 0�3W
Weight
Without stand
4�63 kg
7�6 kg
12�7 kg
With stand
5�02 kg
8�2 kg
13�5 kg
Operating temperature
0°C to +40°C
•  As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes 
for product improvement without prior notice� The performance specification figures indicated are nominal values of 
production units� There may be some deviations from these values in individual units�
NOTE
•  32”   Unit without base weight=4�63 kg  The equipment and its associated mounting means still remain secure during the 
test� (Used wall mounting kit, 100 x 100 mm distance, diameter of Screw dimension: M4 x 18 ) or equivalent�
•  40”   Unit without base weight=7�6 kg  The equipment and its associated mounting means still remain secure during the 
test� (Used wall mounting kit, 200 x 200 mm distance, diameter of Screw dimension:M4 x 18 ) or equivalent�
•  50”   Unit without base weight=12�7 kg  The equipment and its associated mounting means still remain secure during the 
test� (Used wall mounting kit, 400 x 200 mm distance, diameter of Screw dimension: M6 x 18 ) or equivalent�
•  Refer to the inside back cover for dimensional drawings�
•  Audio cannot be output through the HDMI terminal�
 - 15
Attention:  
Your product is marked 
with this symbol� It means 
that used electrical and 
electronic products 
should not be mixed with 
general household waste� 
There is a separate 
collection system for 
these products�
A� Information on Disposal for Users (private households)
1� In the European Union
Attention:  If you want to dispose of this equipment, please do not use the ordinary dust 
bin!
*) Please contact your local authority for further details�
2� In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the 
correct method of disposal�
For 
Switzerland: Used electrical or electronic equipment can be returned free of charge 
to the dealer, even if you don’t purchase a new product� Further collection facilities are 
listed on the homepage of 
www�swico�ch or www�sens�ch
B� Information on Disposal for Business Users
1� In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the 
product� You might be charged for the costs arising from take-back and recycling� Small 
products (and small amounts) might be taken back by your local collection facilities�
For 
Spain: Please contact the established collection system or your local authority for 
take-back of your used products�
2� In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the 
correct method of disposal�
For 
EU: The crossed-out wheeled bin implies that used batteries should not be put to 
Please contact your local authority for details on the collection and recycling schemes�
For 
Switzerland: The used battery is to be returned to the selling point�
For other 
non-EU countries: Please contact your local authority for correct method of 
disposal of the used battery�
 - 15
Attention:  
Your product is marked 
with this symbol� It means 
that used electrical and 
electronic products 
should not be mixed with 
general household waste� 
There is a separate 
collection system for 
these products�
A� Information on Disposal for Users (private households)
1� In the European Union
Attention:  If you want to dispose of this equipment, please do not use the ordinary dust 
bin!
*) Please contact your local authority for further details�
2� In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the 
correct method of disposal�
For 
Switzerland: Used electrical or electronic equipment can be returned free of charge 
to the dealer, even if you don’t purchase a new product� Further collection facilities are 
listed on the homepage of 
www�swico�ch or www�sens�ch
B� Information on Disposal for Business Users
1� In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the 
product� You might be charged for the costs arising from take-back and recycling� Small 
products (and small amounts) might be taken back by your local collection facilities�
For 
Spain: Please contact the established collection system or your local authority for 
take-back of your used products�
2� In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the 
correct method of disposal�
For 
EU: The crossed-out wheeled bin implies that used batteries should not be put to 
Please contact your local authority for details on the collection and recycling schemes�
For 
Switzerland: The used battery is to be returned to the selling point�
For other 
non-EU countries: Please contact your local authority for correct method of 
disposal of the used battery�
Page of 15
Display

Sharp GENERAL INFORMATION (serv.man6) User Manual / Operation Manual ▷ Download