DOWNLOAD Sharp 66FW-54H (serv.man12) Service Manual ↓ Size: 2.32 MB | Pages: 52 in PDF or view online for FREE

5

Note: See on -Typical connections- (page 47) for details of further connection possibilities.

BACK OF TV

6

1. Stand-by ON/OFF switch (TV)

2. Power ON / OFF switch (VCR)

3. Digit buttons 0 ~ 9
4. Flashback button

5. Colour button (green)
6. Colour button (red)

7. Volume DOWN/Cursor control LEFT
8. Menu button

9. Reveal button

10. List selector
11. Store button
12. Cancel button
13. Half page button
14. Cursor button

15. Rewind/picture search/reverse
16. Play button
17. Pause / Still button
18. Stop button

19. TV / VIDEO selector
20. TV GUIDE button
21. Single/Double entry

22. Colour button (yellow)
23. Colour button (cyan)

24. Channel UP/Cursor control UP
25. Volume UP/Cursor control RIGHT
26. Channel DOWN/Cursor control DOWN
27. Wide Mode selector

TV /Teletext 28. Time button

29. Sound mode selector

30. Hold button

31. Sound Mute button

32. Text/Mix/Picture button
33. Index button

34. Channel Up selector
35. Fast forward/picture search/forward
36. Channel Down selector
37. Record button

See together with the pull-down page of the cover.

This TV set contains a DOLBY PRO LOGIC SURROUND DECODER.

Manufactured under license from Dolby Laboratories.

“Dolby”, the double-D symbol and “Pro Logic” are trademarks of Dolby Laboratories.

7

Main Power On/Off Switch

Power Indicator

Program Selector (UP/DOWN)

Volume Buttons (UP/DOWN)

Remote Control Sensor

O.P.C. Sensor

Sound Indicator

O.P.C. and Remote
Control Indicator

Door

Press the top of the door, opening it slightly
hook your finger inside and pull open.

Behind the door
10. Headphone Socket (3.5 mm 

ø

/ 16~600 

B

)

11. S-Video input terminal
12. Video Input Terminal (PAL/SECAM/NTSC)
13. Audio Input Terminal (left)
14. Audio Input Terminal (right)

Woofer output

Rear loudspeaker output (RIGHT)

Rear loudspeaker output (LEFT)

Front loudspeaker output (LEFT)

Front loudspeaker output (RIGHT)

Note: See the technically data of external
speakers on –typical connection– (page 48).

21-pin Audio/Video (AV-2)
With PAL/SECAM/NTSC Video Input

21-pin Audio/Video (AV-1)
With PAL/SECAM/NTSC/S-Video Input
and AV LINK control signal 

21-pin Euro SCART (RGB) 
With PAL/SECAM/NTSC Video Input

Antenna terminal

9

8 7 6 5

4

3

2

1

OPC

1

5

4

3

2

9

8

7

6

10

11

12

13

14

STATION

REAL CHANNEL

FREQUENCY

SIGNALS

NUMBERS

MHZ

VHF

I-1 (A) ÷ I-9 (J)

CH-01 ÷ CH-09

45.75 ÷ 215.25

UHF

I-21 ÷ I-69

CH-21 ÷ CH-69

471.25 ÷ 855.25

C

M1/S1 ÷ M10/S10

CC-01 ÷ CC-10

105.25 ÷ 168.25

A

U-1/S-11 ÷ U-10/S-20

CC-11 ÷ CC-20

231.25 ÷ 294.25

T

S-21 ÷ S-41

CC-21 ÷ CC-41

303.25 ÷ 463.25

V

CC-42 ÷ CC-63

48 ÷ 304

CC-64 ÷ CC-68

69.25 ÷ 98.25

8

Power indicator

Main power button

This TV memorizes the Mode last used when it was switched off. When the
main power button (

I

) is pressed to turn on the set, the power indicator will

light and the set will resume in either the Stand-by mode or Programme
mode, depending upon its condition when it was switched off.

When the TV is in Stand-by mode, to turn ON the TV press the Stand-by but-
ton (

B

l

TV) on the remote control, or one of the four buttons on the TV

( Va/\, VCH/\ ). The TV will change from Stand-by mode to Programme
mode, the sound indicator will light a few moments and an image will appear
on the screen. Press the Stand-by button (

B

l

TV) again and the TV will

return to Stand-by mode.

If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automatically
switch to Stand-by mode after 15 minutes.

Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in
hand.
Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your
own channel number to a real channel and store it in the programme preset memory.