DOWNLOAD Sharp 66FW-54H (serv.man12) Service Manual ↓ Size: 2.32 MB | Pages: 52 in PDF or view online for FREE

32

In this mode you can do again the AUTO INSTALLATION
(e.g.: after home changing).

Press the MENU button 

●

to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the RED button 

to see the INSTALLATION Menu.

Press the RED button again 

to start the AUTO

INSTALLATION.

The AUTO INSTALLATION message will appear on your TV
screen.

Press the MENU button 

●

to stop the AUTO INSTALLATION or

press any other button and follow the instructions on the screen,
to start Auto Channel Preset.

Automatic Channel Sorting System (ASS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.

Note: This tuning process may take several minutes to perform.

When the AUTOMATIC SEARCH has been completed, the "Stored
programmes " menu will appear on screen and you can change the
order of the channels and change or give the channels a four letter
name.
If you wish to rename the channels, or change the order; refer to the
chapter -Stored programmes- (page 9).
If you wish to go out of the menu, press the BLUE button.

33

Press the MENU button 

●

to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the Cursor UP/DOWN buttons  

E

/

F 

to select

«Programme» (red marked).

Press the Cursor LEFT/RIGHT buttons  

C 

/

I 

(or 0 ~ 9 digit

buttons) to select the programme channel number you want to
preset.

Press the Cursor UP/DOWN buttons  

E

/

F

to select

«Channel type» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select “Aerial” or

“Cable”.

Press the Cursor UP/DOWN buttons  

E

/

F

to select

«Channel number» (red marked).

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

(or 0 ~ 9 digit buttons)

to enter the real channel number you want to store.

Repeat the above procedure (3. ~ 8. steps) for presetting other
programme channels.

10. Press the MENU button  

●

to clear the on-screen display.

Press the MENU button 

●

to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the Cursor UP/DOWN buttons  

E

/

F

to select

«Programme» (red marked).

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

(or 0 ~ 9 digit

buttons) to select the programme channel number you want to
preset.

Press the Cursor UP/DOWN buttons  

E

/

F

to select

«Channel type» (red marked).

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to select “Aerial” or

“Cable”.

Press the Cursor UP/DOWN buttons 

E

/

F

to select

«Search» (red marked).

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to tune between the

existing channel and the previous/next one.

Repeat the above procedure (3. ~ 8. steps) for presetting other
programme channels.

10. Press the MENU button 

●

to clear the on-screen display.

34

The following features are available for preset channels:

When a preset programme channel is not exactly tuned, you can fine tune the channel in this mode.

Press the MENU button  

●

to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the Cursor UP/DOWN buttons  

E

/

F

to select

«Programme» (red marked).

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

(or 0 ~ 9 digit

buttons) to select the programme channel number you want to
tune.

Press the Cursor UP/DOWN buttons 

E

/

F

to select «fine

tune» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to adjust the

picture for the best quality.

Repeat the above procedure (3. ~ 6. steps) for other programme
channels as required.

Press the MENU button  

●

to clear the on-screen display.

This feature allows you to select TV, FILTER, VCR or SKIP.

Press the MENU button  

● 

to see the MAIN Menu.

Press the blue button 

to see the TUNE Menu.

Press the Cursor UP/DOWN buttons  

E

/

F

to select

«Programme» (red marked).

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

(or 0 ~ 9 digit

buttons) to select the programme channel number you want to
set.

Press the Cursor UP/DOWN buttons  

E

/

F

to select

«Mode» (red marked).

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to select “TV”

“FILTER”, “VCR” or “SKIP”.
TV:

If the TV signal is weak the image can shake.

In this case put it in TV mode.

FILTER: This mode can be convenient when the level of the

signal received is weak.

VCR: In some cases the upper part of the picture may be

distorted when receiving signal from a VCR via RF terminal
on the TV set.
Selecting this option will help to reduce this effect.

SKIP: Allows you to SKIP channels you do not want to view when

using channels selector buttons  

E

/

F

.

Repeat the above procedure (3. ~ 6. steps) for other programme
channels as required.

Press the MENU button 

●

to clear the on-screen display.

35

 

This features allows you to delete, sort or input name for each one of the programmes with A ~ Z , 0 ~ 9 and hyphen.

Press the MENU button  

●

to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the GREEN button 

to see the EDIT Menu (Stored 

programmes).

the "Stored programmes " menu will appear on screen and you can
change the order of the channels and change or give the channels a
four letter name with the available options:

Select the programme to be edited with Cursor UP/DOWN

buttons  

E

/

F

.

Delete this programme with the YELLOW button 

.

Go to sorting mode with the GREEN button 

.

Edit this programme with the RED button 

.

Exit with the BLUE button 

.

Proceed according to the guidance in each mode.

For more explanation, please go on to the section entitled -Stored programmes- (page 9).

Edit Menu

Sorting Menu

Delete Menu

(Stored programmes)