Sharp XV-Z9000E (serv.man18) User Manual / Operation Manual ▷ View online
5
Appendix
Troubleshooting ...................................................................................... 23
“Gamma Correction” is not operating properly .................................... 23
Glossary ................................................................................................... 24
Services ................................................................................................... 25
6
Required Hardware and Software
SharpVision Manager
requires the following hardware and software
for operation.
PC running under Microsoft Windows 98/98SE/Me or Windows NT/
2000
2000
CPU
233 MHz Pentium or higher is recommended.
Display
A 800
×
600 dot display capable of displaying
65,536 colours or more
Memory
32 MB or more
Hard disk free space
10 MB or more
Interface
An available
RS-232C
serial port for controlling
the projector
CD-ROM drive
●
Note that this software may not operate normally if the serial port
settings, etc., are not correct when serial equipment other than
projectors is also connected to the computer.
settings, etc., are not correct when serial equipment other than
projectors is also connected to the computer.
●
We cannot guarantee that the software will operate on computers
whose motherboards have been changed or modified, or on
computers that the users have configured themselves.
whose motherboards have been changed or modified, or on
computers that the users have configured themselves.
7
Installing/Uninstalling
Projector and PC Connections
This software requires the use of
RS-232C
serial cable. For details on
PC connections, refer to the projector’s operation manual.
CAUTION
Before connecting, be sure to turn both the projector and the computer
off. After making the connection, turn the projector on first. The computer
should always be turned on last.
off. After making the connection, turn the projector on first. The computer
should always be turned on last.
Please read the computer’s instruction manual carefully.
Connecting the Projector with a PC
RS-232C connection
Optional RS-232C cable (cross type)
Refer to the
projector’s operation
manual for details.
projector’s operation
manual for details.
8
Installing the Software
This software can be installed using the installation programme supplied
on the “SharpVision Manager CD-ROM”.
on the “SharpVision Manager CD-ROM”.
1
Check that this software is suited for your computer.
For details, refer to “Required Hardware and Software”
(page 6)
.
2
Quit all running applications before installing this
software.
software.
Be sure to quit all other applications so that no problems occur with
the installer.
the installer.
3
Insert the “SharpVision Manager CD-ROM” in the CD-ROM
drive.
drive.
4
Double click the “My Computer” icon.
5
Double click the CD-ROM drive icon.
6
Double click the “SVM” folder.
7
Double click the “Setup.exe” icon.
w
The “SharpVision Manager Opening Image” will be displayed.
Click on the first or last page to see other XV-Z9000E (serv.man18) service manuals if exist.