Sharp XV-Z3000 Service Manual ▷ View online
33
XV-Z3000
DT-500
NO
Go to "Check when the
lamp turns off soon after
turning on".
lamp turns off soon after
turning on".
YES
Securely insert the
connectors.
connectors.
YES
Securely insert the
connectors.
connectors.
YES
Check IC6001 and
peripheral circuits. (Refer
to the waveform chart 2.)
peripheral circuits. (Refer
to the waveform chart 2.)
NO
Check IC1715 and
peripheral circuits. (Refer
to the waveform chart 1.)
peripheral circuits. (Refer
to the waveform chart 1.)
NO
Fully insert the connectors
or replace the harnesses.
or replace the harnesses.
YES
Replace the lamp.
YES
Go to "Power supply PWB
check".
check".
NO
Replace both D911 and
D912.
D912.
YES
Replace D914 or D910,
whichever is short-circuited.
whichever is short-circuited.
YES
Replace the color wheel.
YES
Checking the lamp
light-up
Does the lamp turn on
when the power is turned
when the power is turned
Is the lamp tight in the
socket?
socket?
NO
Has the FPC cable to
SC6001 come off or is it
loose?
SC6001 come off or is it
loose?
Is rotating sound of the
color wheel heard?
color wheel heard?
NO
Is approx. 0.7 V applied to
TL1740?
TL1740?
YES
NO
Has the harness connected
to P702 on the power
supply unit come off, or is it
loose? Otherwise, is it
broken?
to P702 on the power
supply unit come off, or is it
loose? Otherwise, is it
broken?
NO
Dose the lamp turn on after
the replacement?
the replacement?
YES
Is 340 VDC applied to both
ends of C914?
ends of C914?
NO
Is D911 or D912 short-
circuited?
circuited?
Is D914or D910 short-
circuited?
circuited?
YES
34
XV-Z3000
DT-500
NO
Securely insert the
connectors.
connectors.
YES
Check the cooling fan.
NO
Check peripheral circuits of
Q1714.
Q1714.
NO
Check IC1712, IC6001 and
peripheral circuits.
peripheral circuits.
NO
Go to "DMD system check".
Is 3.3 V applied to TL1704?
NO
Check IC1711 and
peripheral circuits.
peripheral circuits.
NO
Check PHOTO SENSOR
PWB.
PWB.
NO
Check IC1701 and
peripheral circuits.
peripheral circuits.
NO
Check IC1706 and
peripheral circuits.
peripheral circuits.
YES
Is 5 V applied to TL1726
with P1702 removed?
with P1702 removed?
NO
Check connection of
FB1716.
FB1716.
NO
Check when the lamp turns
off soon after turning on
off soon after turning on
Have connectors P1702,
P1721, P1722, P1723 and
P1724 come off or are they
loose?
P1721, P1722, P1723 and
P1724 come off or are they
loose?
Is each cooling fan
rotating?
rotating?
Is approx. 3 V applied to
TL1712?
TL1712?
YES
Is 12 V applied to TL1709?
YES
Is 2.5 V applied to
TL1706?
TL1706?
YES
Check IC1704 and
peripheral circuits.
peripheral circuits.
NO
Is 5 V applied to TL1726?
YES
Is the signal of 180 Hz
sent to TL1727?(When
vertical frequency of the
input signal is 60 Hz)
sent to TL1727?(When
vertical frequency of the
input signal is 60 Hz)
YES
Is the signal of 180 Hz
sent to TL1740? (When
vertical frequency of the
input signal is 60 Hz)
sent to TL1740? (When
vertical frequency of the
input signal is 60 Hz)
YES
YES
Is 5 V applied to TL1708?
YES
Check the power supply
ballast PWB.
ballast PWB.
YES
35
XV-Z3000
DT-500
YES
End
YES
Check Q4003, Q4004,
Q4005 and the peripheral
circuits.
Q4005 and the peripheral
circuits.
NO
Check IC1705 and
peripheral circuits.
peripheral circuits.
NO
Check IC1702 and
peripheral circuits.
peripheral circuits.
NO
Check Q3002 and
peripheral circuits.
peripheral circuits.
NO
RGB signal check
Send RGB signal from
INPUT 5.
Select INPUT 5 using keys
on the main unit or the
remote control.
INPUT 5.
Select INPUT 5 using keys
on the main unit or the
remote control.
Is image displayed
normally?
normally?
Are picture signals sent to
TL3001, TL3002 and
TL3003?
TL3001, TL3002 and
TL3003?
NO
YES
Is 3.3V applied to TL1707?
Is 3.5V applied to TL1704?
YES
Check IC3001 and
peripheral circuits.
peripheral circuits.
YES
Is 3.3V applied to pin(5) of
Q3002?
Q3002?
YES
36
XV-Z3000
DT-500
YES
End
YES
Check IC4002 and the
peripheral circuits.
peripheral circuits.
NO
Check IC1705 and
peripheral circuits.
peripheral circuits.
NO
Check IC1702 and
peripheral circuits.
peripheral circuits.
NO
Check Q3002 and
peripheral circuits.
peripheral circuits.
NO
Component signal
check
check
Send component signal of
1080i (or 720P) from
INPUT 1 or INPUT 2.
Select INPUT 1 or INPUT 2
using keys on the main unit
or the remote control.
1080i (or 720P) from
INPUT 1 or INPUT 2.
Select INPUT 1 or INPUT 2
using keys on the main unit
or the remote control.
Is image displayed
normally?
normally?
Are picture signals sent to
TL3008, TL3007, and
TL3006?
TL3008, TL3007, and
TL3006?
NO
YES
Is 3.3V applied to TL1707?
Is 3.3V applied to TL1704?
YES
Check IC3001 and
peripheral circuits.
peripheral circuits.
YES
Is 3.3V applied to pin(5) of
Q3002?
Q3002?
YES
Click on the first or last page to see other XV-Z3000 service manuals if exist.