Sharp XV-Z3000 Service Manual ▷ View online
29
XV-Z3000
DT-500
Is 6 V applied to TL1731
and 13 V to TL1734?
Is approx. 6 V applied to
TL1710?
Is 1.5 V applied to
TL1703?
Go to "Power supply
ballast PWB check".
Check IC1713 and
peripheral circuits.
Check IC1701 and
peripheral circuits.
Is 3.3 V applied to
TL1704?
Check IC1702 and
peripheral circuits.
Is 2.5 V applied to
TL1706?
Check IC1703 and
peripheral circuits.
Is 1.5 V applied to
TL1705?
Check IC1704 and
peripheral circuits.
Is 5 V applied to TL1708?
Check IC1711 and
peripheral circuits.
Is 3.3 V applied to
TL1707?
Check IC1705 and
peripheral circuits.
Is 12 V applied to
TL1709?
Check IC1712 and
peripheral circuits.
Is 3.3 V applied to pin(1)
of IC1714?
Check IC1714 and
peripheral circuits.
Is 3.18 V applied to pin(1)
of IC2204?
Check IC2204, 2207, 2208
and peripheral circuits.
Is 3.3 V applied to pin(1)
of S2001?
Check that it is set to the N
side. Or remove S2001.
Are rectangular waves of
50 MHz and 48 MHz
supplied to pins (8) and (7)
of IC2206 respectively?
Check IC2001, IC2002,
IC2202, IC2203 and
peripheral circuits.
Check IC2206 and
peripheral circuits.
30
XV-Z3000
DT-500
!
"#$$%
& !
"#$ %
'& !
"#$&%
" ( )* +,+
)*
-
(
+,+
.(
+,+/
((/
+,+ )*
$
-
31
XV-Z3000
DT-500
YES
Check peripheral circuits of
IC703.
IC703.
YES
Is 13 V applied to pins (3)
and (4) of the connector
P704?
and (4) of the connector
P704?
YES
YES
Is DC voltage of 380 V
applied to both ends of
C704?
applied to both ends of
C704?
YES
Check circuits R766 and
after or replace R766.
after or replace R766.
YES
Is R766 in the OPEN
status?
status?
Is pin (11) of the connector
P704 at "H"?
P704 at "H"?
Are connectors P704 and
CN901 fully inserted?
CN901 fully inserted?
Is 6 V applied to pins (7)
and (8) of the connector
P704?
and (8) of the connector
P704?
NO
NO
NO
Securely insert the
connectors.
connectors.
Check peripheral circuits
of IC902.
of IC902.
YES
NO
NO
Is LAMP-COM signal
properly sent to pin (14) of
the connector P704?
(Refer to the waveform
chart 1.)
properly sent to pin (14) of
the connector P704?
(Refer to the waveform
chart 1.)
Are GATE waveforms of
Q901 and Q903
appropriate?
(See waveform diagram
Q901 and Q903
appropriate?
(See waveform diagram
8.)
NO
Does the lamp turn on?
YES
Check the main PWB.
Check the main PWB.
NO
Check the main PWB.
NO
Check the ballast PWB.
NO
Power supply PWB
check
check
1
32
XV-Z3000
DT-500
YES
YES
YES
Securely insert the connectors.
NO
Replace F701.
NO
Press the red button on the
bimetal.
bimetal.
NO
YES
NO
YES
NO
Are connectorsP701 and
P702 fully inserted?
P702 fully inserted?
Is AC voltage between 100
− 240 V applied to both
ends of C707?
− 240 V applied to both
ends of C707?
Is the bimetal broken?
(Connection between 1 and
2 of P702)
(Connection between 1 and
2 of P702)
Is R717 open?
Check that P704 connector
pin (11) is at "H". Replace
R717.
pin (11) is at "H". Replace
R717.
Is R705 open?
Replace F705.
Check that the power
supply FAN FB and FC
are not stopped.
Check that the power
supply FAN FB and FC
are not stopped.
Check peripheral circuits of
IC703.
IC703.
1
Click on the first or last page to see other XV-Z3000 service manuals if exist.