Sharp XV-Z10000 (serv.man7) Service Manual ▷ View online
19
XV-Z10000
6. Removing the lamp unit, CW fan, outlet fan, bimetal, wind way duct, shield
plate and formater PWB.
14.
Remove the three screws and detach the lamp unit.
15.
Remove the two screws and detach the CW fan.
16.
Remove the three screws and detach the outlet fan.
17-1. Remove the two screws and detach the bimetal.
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
15
Outlet Fan
Bimetal
14
Lamp unit
16
18-1
17-1
17-2
Wind way Duct
18-2
18-2
Shield Plate(B)
Shield Plate(A)
Formater PWB
18-3
19
XV-Z10000
6. Removing the lamp unit, CW fan, outlet fan, bimetal, wind way duct, shield
plate and formater PWB.
14.
Remove the three screws and detach the lamp unit.
15.
Remove the two screws and detach the CW fan.
16.
Remove the three screws and detach the outlet fan.
17-1. Remove the two screws and detach the bimetal.
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
15
Outlet Fan
Bimetal
14
Lamp unit
16
18-1
17-1
17-2
Wind way Duct
18-2
18-2
Shield Plate(B)
Shield Plate(A)
Formater PWB
18-3
19
XV-Z10000
6. Removing the lamp unit, CW fan, outlet fan, bimetal, wind way duct, shield
plate and formater PWB.
14.
Remove the three screws and detach the lamp unit.
15.
Remove the two screws and detach the CW fan.
16.
Remove the three screws and detach the outlet fan.
17-1. Remove the two screws and detach the bimetal.
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
15
Outlet Fan
Bimetal
14
Lamp unit
16
18-1
17-1
17-2
Wind way Duct
18-2
18-2
Shield Plate(B)
Shield Plate(A)
Formater PWB
18-3
19
XV-Z10000
6. Removing the lamp unit, CW fan, outlet fan, bimetal, wind way duct, shield
plate and formater PWB.
14.
Remove the three screws and detach the lamp unit.
15.
Remove the two screws and detach the CW fan.
16.
Remove the three screws and detach the outlet fan.
17-1. Remove the two screws and detach the bimetal.
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
15
Outlet Fan
Bimetal
14
Lamp unit
16
18-1
17-1
17-2
Wind way Duct
18-2
18-2
Shield Plate(B)
Shield Plate(A)
Formater PWB
18-3
Display