DOWNLOAD Sharp XV-Z10000 (serv.man30) Service Manual ↓ Size: 1.58 MB | Pages: 26 in PDF or view online for FREE

Model
XV-Z10000 (serv.man30)
Pages
26
Size
1.58 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Chapter 3 - Basic operation
File
xv-z10000-sm30.pdf
Date

Sharp XV-Z10000 (serv.man30) User Manual / Operation Manual ▷ View online

Basic Operation
Basic Operation
Image Projection
Basic Procedure
Connect the required external equipment to
the projector before operating the following
procedures.
Info
The language preset at the factory is English.
If you want to change the on-screen display
to another language, reset the language ac-
cording to the procedure on page 34.
1
Plug the power cord into the
wall outlet.
The power indicator illuminates red, and
the projector enters standby mode.
2
Press 
ON
 on the remote con-
trol or 
 on the projector.
The  power indicator  illuminates blue.
After the lamp replacement indicator il-
luminates, the projector is ready to start
operation.
Note
The lamp replacement indicator il-
luminates, indicating the status of the
lamp.
Blue: The lamp is ready.
Blue blinking: The lamp is
warming up.
Red: The lamp should be replaced.
If the power is turned off and imme-
diately switched on again, the lamp
replacement indicator may take time
to illuminate.
When controlling the projector using
RS-232C commands from a com-
puter, wait for at least 30 seconds
after the power has been turned on,
and then transmit the commands.
-32
INPUT
button
Power (ON)
button
Power (OFF)
button
MENU button
"',\| buttons
ENTER
button
Power (ON)
button
INPUT
buttons
'"\|
buttons
MENU button
ENTER
button
Power (OFF)
button
Lamp replacement
indicator
Power indicator
Basic Operation
-33
3
Press 
 or 
on the remote control or 
 on
the projector to select the IN-
PUT mode.
After pressing 
 once on the projector,
use 
 to select the desired input mode.
Note
When no signal is received, “NO
SIGNAL” will be displayed. When a
signal that the projector is not pre-
set to receive is received, “NOT
REG.” will be displayed.
The INPUT mode is not displayed
when “OSD display” is set to “Level
A” or “Level B”. (See page 64.)
About the INPUT modes
"On-screen Display (Example)
Using RGB*
Using
Component
INPUT 2 mode
Using
Component
INPUT 1 mode
INPUT 3 mode
INPUT 4 mode
Using RGB*
➝➝
INPUT 5 mode
* Input the RGB signal of the DTV, not
the computer.
Using S-Video
Using Video
Using Analog
RGB
The display varies accord-
ing to the “Signal Type” with
the INPUT 5.  The diagram
shown above is the ex-
ample of having selected
“Analog RGB”.
Used for projecting images
from equipment that sends
component signals or RGB
signals connected to the
INPUT 1 or 2 terminals.
Used for projecting im-
ages from equipment con-
nected to the S-VIDEO in-
put terminal.
Used for projecting im-
ages from equipment
connected to the VIDEO
input terminal.
Used for projecting im-
ages from equipment
connected to the DVI in-
put terminal.
INPUT 1
INPUT 2
(Compo-
nent/RGB*)
INPUT 3
(S-Video)
INPUT 4
(Video)
INPUT 5
(Digital PC
RGB/
Digital PC
Component/
Digital Video
RGB/Digital
Video
Component/
Analog RGB/
Analog
Component)
Image Projection
Power (ON)
button
4
Press 
 on the remote control
or 
 on the projector, then
press 
 or 
 again while the
confirmation message is dis-
played, to turn off the projec-
tor.
Note
If you accidentally pressed 
 and
do not want to turn off the power,
wait until the confirmation message
disappears.
Info
Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
Selecting the On-screen
Display Language
The on-screen display language of the
projector can be set to English, German,
Spanish, Dutch, French, Italian, Swedish,
Portuguese, Chinese, Korean or Japa-
nese.
1
Press 
.
The menu will be displayed.
2
Press  \ or | to select “Lan-
guage”.
MENU
button
'"\|
buttons
-34
Power (OFF)
button
ENTER button
Page of 26
Display

Sharp XV-Z10000 (serv.man30) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp XV-Z10000 (serv.man30) Service Manual ↓ Size: 1.58 MB | Pages: 26 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp XV-Z10000 (serv.man30) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XV-Z10000 (serv.man30) Projector. Information contained in Sharp XV-Z10000 (serv.man30) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.